Search OEDI Data

UAE6 Wind Tunnel Tests Data UAE6 Sequence 7 Raw Data

**Overview** Sequence 7: Shroud Operating (P) This test sequence used a downwind, rigid turbine with a 3.4° cone angle. The wind speed ranged from 5 m/s to 25 m/s. Turntable angles from 0° to 30° were achieved, but the yaw error angle was maintained at 0° by adjusting the na...

Fingersh, L. Wind Energy Technologies Office (WETO)

Nov 28, 2018
1 Resources
0 Stars
Publicly accessible

UAE6 Wind Tunnel Tests Data UAE6 Sequence V Raw Data

**Overview** Sequence V: Tip Plate (F) This test sequence used an upwind, rigid turbine with a 0° cone angle. The wind speed ranged from 5 m/s to 25 m/s, and the yaw angle was held at 0°. The blade pitch angle was 3°. The rotor rotated at 72 RPM. Blade pressure measurements w...

Fingersh, L. Wind Energy Technologies Office (WETO)

Nov 28, 2018
1 Resources
0 Stars
Publicly accessible

UAE6 Wind Tunnel Tests Data UAE6 Sequence W Raw Data

**Overview** Sequence W: Extended Blade (F) This test sequence used an upwind, rigid turbine with a 0° cone angle. The wind speed ranged from 5 m/s to 21 m/s, and the yaw angle was held at 0°. The blade pitch angle was 3°. The rotor rotated at 72 RPM. Blade pressure measureme...

Fingersh, L. Wind Energy Technologies Office (WETO)

Nov 11, 2018
1 Resources
0 Stars
Publicly accessible

UAE6 Wind Tunnel Tests Data UAE6 Sequence N Raw Data

**Overview** Sequence N: Sin AOA, Rotating (P) This sequence was designed to quantify the blade 3-D unsteady aerodynamic response in the presence of rotational influences by varying blade pitch angle. Test sequence N used an upwind, rigid turbine with a 0° cone angle. The wind ...

Fingersh, L. Wind Energy Technologies Office (WETO)

Nov 28, 2018
1 Resources
0 Stars
Publicly accessible

UAE6 Wind Tunnel Tests Data UAE6 Sequence E Raw Data

**Overview** Sequence E: Yaw Releases (P) This test sequence used a downwind, rigid turbine with a 3.4° cone angle. The wind speeds ranged from 7 m/s to 17 m/s. Initial yaw angles of ±90° were achieved. The blade tip pitch was 3°. The rotor rotated at 72 RPM. Blade and probe...

Fingersh, L. Wind Energy Technologies Office (WETO)

Nov 27, 2018
1 Resources
0 Stars
Publicly accessible

Gearbox Reliability Collaborative Phase 3 Gearbox 3 Test

The GRC uses a combined gearbox testing, modeling, and analysis approach disseminating data and results to the industry and facilitating improvement of gearbox reliability. This test data describes the tests of GRC gearbox 3 in the National Wind Technology Center dynamometer and d...

Keller and WallenNational Renewable Energy Laboratory

Dec 21, 2016
18 Resources
0 Stars
Publicly accessible

INTEGRATE Inverse Network Transformations for Efficient Generation of Robust Airfoil and Turbine Enhancements

The INTEGRATE (Inverse Network Transformations for Efficient Generation of Robust Airfoil and Turbine Enhancements) project is developing a new inverse-design capability for the aerodynamic design of wind turbine rotors using invertible neural networks. This AI-based design techno...

Vijayakumar, G. et al National Renewable Energy Laboratory (NREL)

May 04, 2021
8 Resources
0 Stars
Publicly accessible

Lidar HilFlowS LLNL WindCube v2 EOP Processed Data

**Overview** The WindCube v2 is a pulsed LIDAR and uses four beams sent in succession in the four cardinal directions along a 28°scanning cone angle to measure horizontal velocity and wind direction. A fifth beam is sent in the vertical direction to measure vertical velocity. Me...

Wharton, S. and , . Wind Energy Technologies Office (WETO)

Jul 07, 2019
1 Resources
0 Stars
Publicly accessible

Lidar HilFlowS LLNL ZephIR300 WOP Processed Data

**Overview** The ZephIR300 is a continuous wave LIDAR with a range of 10 m to 300 m. During HilFlowS the ZephIR300 was programmed to measure from 10 m to 150 m. In addition, the ZephIR300 provided a measurement at 1 m height using an onboard meteorological sensor. The ZephIR300 ...

Wharton, S. and , . Wind Energy Technologies Office (WETO)

Jul 07, 2019
1 Resources
0 Stars
Publicly accessible

Lidar HilFlowS LLNL ZephIR300 MOP Processed Data

Wharton, S. and , . Wind Energy Technologies Office (WETO)

Jul 07, 2019
1 Resources
0 Stars
Publicly accessible

Surface Meteorological Station HilFlowS LLNL 52m tall tower EOP Processed Data

**Overview** The WindCube v2 was co-located with Site 300’s 52-m-tall meteorological tower so that measurements below 40 m could also be observed. The meteorological tower has three measurement levels: 10 m, 23 m, and 52 m. Wind speed was measured with a cup anemometer; wind di...

Wharton, S. and , . Wind Energy Technologies Office (WETO)

Jul 07, 2019
1 Resources
0 Stars
Publicly accessible

WIND Toolkit Offshore Summary Dataset

This dataset contains summary statistics for offshore wind resources for the continental United States derived from the Wind Integration National Datatset (WIND) Toolkit. These data are available in two formats: GDB Compressed geodatabases containing statistical summaries align...

Draxl. . et al National Renewable Energy Laboratory

Jul 21, 2017
7 Resources
0 Stars
Publicly accessible

Surface Meteorological Station ANL 50m, Sonic, Physics site-12 Raw Data

**Overview** Measurements of surface sensible heat flux, momentum flux, wind components, and virtual temperature. **Data Details** * X (column 1) is a component of wind cm/s plus toward north. * Y (column 2) is a component of wind cm/s plus toward east. * Z (column 3) is...