Search OEDI Data

Showing results 26 - 50 of 52.
Show results per page.
Order by:
Available Now:
Clear All Filters ×
Research Areas
Accessibility
Data Type
Organization
Source
"carbon sequestration"×
Geothermal Data Repository (GDR)×

Dynamic Column Extraction for Europium on Media 1 at Ambient Temperature

This is a dataset for a 200ppm europium solution sent through a column with 12g of media #1 at pH of 3.2. This column experiment was run at ambient temperature at a flow rate of 2mL/min.
Garland, G. Tusaar Corp.
Apr 07, 2015
2 Resources
0 Stars
Publicly accessible

Experimental Parameters Affecting Stripping of Rare Earth Elements from Loaded Sorptive Media in Simulated Geothermal Brines

Experimental results from several studies exploring the impact of pH and acid volume on the stripping of rare earth elements (REEs) loaded onto ligand-based media via an active column. The REEs in this experiment were loaded onto the media through exposure to a simulated geother...
Stull, D. Tusaar Corp.
May 24, 2016
2 Resources
0 Stars
Publicly accessible

West Flank Coso FORGE: 52B-7 Image and Mud Log

FMI image log and mud log of well 52B-7
Blankenship, D. Sandia National Laboratories
Apr 01, 1992
2 Resources
0 Stars
Publicly accessible

WISE-CASING: Time Domain Reflectometry Data from Lab Experiment on Steel Pipe

The steel pipe experiment conducted in the lab was using 6 meter low-carbon steel pipe. We tested it with both dry and in-water condition. In the dry experimental setup, a coaxial cable acting as a return path in the air.
Wang, J. and Wu, Y. Lawrence Berkeley National Laboratory
Jul 23, 2019
9 Resources
0 Stars
Publicly accessible

Sorption Capacity of Europium for Media 1 and Media 2 from Solution at Ambient Temperature

This dataset shows the capacity for Europium of media #1 and media #2 in a shakertable experiment. The experimental conditions were 150mL of 500ppm Eu solution, 2g of media, pH of 3.2, at ambient temperature.
Garland, G. Tusaar Corp.
Mar 16, 2015
2 Resources
0 Stars
Publicly accessible

Improvements in 2016 to Natural Reservoir Analysis in Low-Temperature Geothermal Play Fairway Analysis for the Appalachian Basin

*These files add to and replace same-named files found within Submission 559 (hover over file display names to see actual file names in bottom-left corner of screen)* The files included in this submission contain all data pertinent to the methods and results of a cohesive multi-st...
Camp, E. Cornell University
Aug 18, 2016
16 Resources
0 Stars
Publicly accessible

CO2 Push-Pull Single Fault Injection Simulations

ASCII text files containing grid-block name, X-Y-Z location, and multiple parameters from TOUGH2 simulation output of CO2 injection into an idealized single fault representing a dipping normal fault at the Desert Peak geothermal field (readable by GMS). The fault is composed of a ...
Borgia, A. et al Lawrence Berkeley National Laboratory
Sep 21, 2017
5 Resources
0 Stars
Publicly accessible

High-Temperature Self-Healing Geothermal Cement Composites

A presentation with notes showing an overview of the last 6 months of the project on high-temperature self-healing inorganic cement composites. General approach, test methods and results for the self-healing cement composites are presented. Data include strength recoveries for 9 c...
Pyatina, T. and Sugama, T. Brookhaven National Laboratory
Mar 21, 2017
1 Resources
0 Stars
Publicly accessible

Brine Stability Study

This is a study of the brine formulations that we were using in our testing were stable over time. The data includes charts, as well as, all of the original data from the ICP-MS runs to complete this study.
Garland, G. Tusaar Corp.
Apr 15, 2015
6 Resources
0 Stars
Publicly accessible

StimuFrac Compressibility as a Function of CO2 Molar Fraction

Compressibility values were obtained in a range of pressures at 250degC by employing a fixed volume view cell completely filled with PAA aqueous solution and injecting CO2 at constant flow rate (0.3mL/min). Pressure increase as a function of supercritical CO2 (scCO2) mass fraction...
A., C. Pacific Northwest National Laboratory
Apr 29, 2016
1 Resources
0 Stars
Publicly accessible

Community Geothermal: Energy, Cost, and Carbon Modeling for District Design Ann Arbor, MI

This data includes results on an analysis of existing and projected energy, cost, and carbon for the City of Ann Arbor District Geothermal Design and Deployment to Equitably Decarbonize Low Income Neighborhoods in Ann Arbor project. The scope of the project includes designing and ...
Lee, J. and McMillen, A. IMEG Corp
Jan 01, 2024
31 Resources
0 Stars
Publicly accessible

Chemical Impact of Elevated CO2 on Geothermal Energy Production

Numerical simulations have shown that the use of supercritical CO2 instead of water as a heat transfer fluid yields significantly greater heat extraction rates for geothermal energy. If this technology is implemented successfully, it could increase geothermal energy production and...
Carroll, S. et al Lawrence Livermore National Laboratory
Jan 01, 2013
3 Resources
0 Stars
Publicly accessible

Summary of Cement Formulations Tested by BNL for Self-Healing Ability Tests Conditions and Data

A table of cement formulations tested by Brookhaven National Laboratory in 2016-2017 in the frame of the "Self-healing and Re-Adhering Cements with Improved Toughness at Casing and Formation Interfaces for Geothermal Wells" project.
Sugama, T. Brookhaven National Laboratory
Sep 27, 2017
2 Resources
0 Stars
Publicly accessible

CO2 Push-Pull Dual (Conjugate) Faults Injection Simulations

This submission contains datasets and a final manuscript associated with a project simulating carbon dioxide push-pull into a conjugate fault system modeled after Dixie Valley- sensitivity analysis of significant parameters and uncertainty prediction by data-worth analysis. Datas...
Oldenburg, C. et al Lawrence Berkeley National Laboratory
Jul 20, 2017
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Geochemical Data for Cold Groundwaters and Produced Geothermal Fluids

Geochemical data for cold groundwaters and produced geothermal fluids around the Utah FORGE site. The data is compiled into four tables in the attached Excel File. Table 1 is a compilation of compositions (anions, cations, weak acids, oxygen, hydrogen, and carbon isotopes) for c...
Simmons, S. and Kirby, S. Energy and Geoscience Institute at the University of Utah
Aug 16, 2024
1 Resources
0 Stars
Publicly accessible

Repetitive Regeneration of Media #1 in a Dynamic Column Extraction using Brine #1

This data is from a regeneration study from a dynamic column extraction experiment where we ran a solution of REE's through a column of media #1 then stripped the REE's off the media using 2M HNO3 solution. We then re-equilibrated the media and repeated the process of running a RE...
Garland, G. Tusaar Corp.
Oct 14, 2015
4 Resources
0 Stars
Publicly accessible

Updated Overpressures and Permeability Values for PNNL's StimuFrac Fluid

A corrigendum was submitted to the journal of Geothermics on our article "Environmentally friendly, rheoreversible, hydraulic-fracturing fluids for enhanced geothermal systems" Shao et al Geothermics 58 (2015) 22-31. In the original article some permeability values were underesti...
Shao, H. et al Pacific Northwest National Laboratory
Apr 06, 2016
1 Resources
0 Stars
Publicly accessible

Wister, CA Downhole and Seismic Data

This submission contains Downhole geophysical logs associated with Wister, CA Wells 12-27 and 85-20. The logs include Spontaneous Potential (SP), HILT Caliper (HCAL), Gamma Ray (GR), Array Induction (AIT), and Neutron Porosity (NPOR) data. Also included are a well log, Injection T...
Akerley, J. Ormat Nevada Inc
Dec 18, 2010
16 Resources
0 Stars
Publicly accessible

Effective Elastic and Neutron Capture Cross Section Calculations Corresponding to Simulated Fluid Properties from CO2 Push-Pull Simulations

The submission contains a .xls files consisting of 10 excel sheets, which contain combined list of pressure, saturation, salinity, temperature profiles from the simulation of CO2 push-pull using Brady reservoir model and the corresponding effective compressional and shear velocity...
Chugunov, N. and Altundas, B. Lawrence Berkeley National Laboratory
Mar 07, 2018
1 Resources
0 Stars
Publicly accessible

Rare Earth Element Sorption Study on sieved 50 +100 mesh fraction of Media 1 in Brine 1 with Different Starting pHs at 70C

This is a continuation of the rare earth element sorption study for shaker bath tests on 2g media #1 in 150mL brine #1 with different starting pH's at 70C. In a previous submission we reported data for shaker bath tests for brine #1 with starting pH's of 3.5, 4.5 and 5.5. In this ...
Garland, G. Tusaar Corp.
Sep 29, 2015
5 Resources
0 Stars
Publicly accessible

University of Illinois Campus Deep Direct-Use Feasibility Study Porosity and Permeability of Rock Formations

Porosity and permeability data from published and unpublished sources for the St. Peter and Mt. Simon Sandstones in the Illinois Basin.
Damico, J. et al University of Illinois
Mar 30, 2018
4 Resources
0 Stars
Publicly accessible

Applications of Geothermally-Produced Colloidal Silica in Reservoir Management Smart Gels

In enhanced geothermal systems (EGS) the reservoir permeability is often enhanced or created using hydraulic fracturing. In hydraulic fracturing, high fluid pressures are applied to confined zones in the subsurface usually using packers to fracture the host rock. This enhances r...
Hunt, J. et al Lawrence Livermore National Laboratory
Jan 31, 2013
2 Resources
0 Stars
Publicly accessible

Appalachian Basin Play Fairway Analysis: Natural Sedimentary Reservoirs Data 2016 Revision

Tier 3 data for Appalachian Basin sectors of New York, Pennsylvania and West Virginia used in a Geothermal Play Fairway Analysis of opportunities for low-temperature direct-use applications of heat. It accompanies data and materials submitted as Geothermal Data Repository Submissi...
Jordan, T. Cornell University
Dec 07, 2016
3 Resources
0 Stars
Publicly accessible

Simulations of Brady's-Type Fault Undergoing CO2 Push-Pull: Pressure-Transient and Sensitivity Analysis

Input and output files used for fault characterization through numerical simulation using iTOUGH2. The synthetic data for the push period are generated by running a forward simulation (input parameters are provided in iTOUGH2 Brady GF6 Input Parameters.txt [InvExt6i.txt]). In gene...
Jung, Y. and Doughty, C. Lawrence Berkeley National Laboratory
Mar 09, 2018
11 Resources
0 Stars
Publicly accessible

Utah FORGE: Final Topical Report 2018

This is the final topical report for the Phase 2B Utah FORGE project, which is located near Roosevelt Hot Springs, Utah. This PDF format report details results associated with the conceptual geologic model, deep well 58-32, rock geomechanics, reservoir temperatures, seismic survey...
Moore, J. et al Energy and Geoscience Institute at the University of Utah
Apr 07, 2018
2 Resources
0 Stars
Publicly accessible
<< Previous123Next >>