Search OEDI Data

Renewable Energy Potential Model: Geothermal Supply Curves

The Renewable Energy Potential (reV) model is a geospatial platform for estimating technical potential and developing renewable energy supply curves, initially developed for wind and solar technologies. The model evaluates deployment constraints, considering land use, environmenta...

Trainor-Guitton, W. et al National Renewable Energy Laboratory

Aug 21, 2023
3 Resources
0 Stars
Publicly accessible

LandRAY PTO Test Plans with NREL NWTC 5 MW Dynamometer

The overarching project objective is to demonstrate the feasibility of using an innovative PowerTake-Off (PTO) Module in Columbia Power's utility-scale wave energy converter (WEC). The PTO Module uniquely combines a large-diameter, direct-drive, rotary permanent magnet generator; ...

Prudell, J. et al Columbia Power Technologies, Inc.

Feb 29, 2016
5 Resources
0 Stars
Publicly accessible

Public Housing: A Tailored Approach to Energy Retrofits Raleigh

More than 1 million U.S. Department of Housing and Urban Development-supported public housing units provide rental housing for eligible low-income families across the country. These units range from scattered single-family houses to high-rise apartments. In this project, the Advan...

Dentz, J. et al The Levy Partnership, Inc Systems Building Research Alliance

Apr 27, 2016
7 Resources
0 Stars
Publicly accessible

TEAMER: Techno-Economic Assessment of AWS Waveswing

The submitted information includes the final report and the supporting datasets in Excel format. Submitted data includes: an Excel based techno-economic model with input-output (IO) analysis, costing functions in generalized form, performance metrics and computation, and scatte...

Previsic, M. Re Vision Consulting

Mar 07, 2025
3 Resources
0 Stars
Publicly accessible

NorthernStar Zero Energy Ready Homes

This is a repository for all NorthernSTAR Zero Energy Ready certified homes. Amaris Homes Model Home St. Paul, MN 55110 Description: Model home completed September 2013 The DOE Zero Energy Ready Home Case Study looks to study and eventually design zero net energy homes in cold we...

Huelman, P. University of Minnesota NorthernSTAR Building America Partnership

Apr 27, 2016
20 Resources
0 Stars
Publicly accessible

Reference Model 5 Full Scale Geometry (RM5: Oscillating Surge Flap)

Contains the Reference Model 5 (RM5) full scale geometry files of the Oscillating Surge Flap, developed by the Reference Model Project (RMP). These full scale geometry files are saved as SolidWorks assembly, IGS, and STEP files, and require a CAD program to view. This data was gen...

Neary, V. et al Sandia National Laboratories

Sep 30, 2014
5 Resources
0 Stars
Publicly accessible

TEAMER: Techno-Economic Optimization of the SurgeWEC Device

This is the post-access report for a Teamer-funded effort to optimize the SurgeWEC device, a near-shore pivoting flap wave energy conversion device used to desalinate water. Parametrically driven cost and performance models enabled an integrated optimization approach at the farm s...

Previsic, M. Re Vision Consulting

Feb 20, 2022
2 Resources
0 Stars
Publicly accessible

Oilwell Conversion (Well API 121913310501) to Geothermal Heat Storage Well for Flexible Electricity Storage

Geothermal growth is limited by a lack of geographically dispersed high-temperature thermal resources and high initial upfront investment in characterization and well construction. This project intended to address the challenges of energy supply intermittency and enhance grid resi...

Malkewicz, N. et al University of Illinois

May 05, 2021
8 Resources
0 Stars
Publicly accessible

Community Geothermal: Connecticut Workforce Needs Assessment Report and Data

Included here is a geothermal industry workforce needs assessment report for Connecticut. As part of the DOE-funded Community Geothermal Heating and Cooling Design and Deployment grant, Northeast Energy Efficiency Partnership (NEEP) conducted several online surveys to gain a bett...

Macpherson, C. et al Connecticut Department of Energy and Environmental Protection (CT DEEP)

Jan 22, 2024
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16B(78)-32 Stimulation Hydraulic Fracturing In-Well DAS Fiber Optic Monitoring Report April 2024

The report reviews results obtained by Neubrex using Distributed Acoustic Sensing (DAS) during the 16B(78)-32 hydraulic fracturing operations, Stages 1–4. It details DAS data acquisition, processing, and analysis, with a focus on acoustic noise signatures recorded during each st...

Jurick, D. et al Neubrex Energy Services (US), LLC

Apr 26, 2024
1 Resources
0 Stars
Publicly accessible

State Estimation for advanced control of wave energy converters

A report on state estimation for advanced control of wave energy converters (WECs), with supporting data models and slides from the overview presentation. The methods discussed are intended for use to enable real-time closed loop control of WECs.

Coe, R. and Bacelli, G. Sandia National Laboratories

Apr 25, 2017
6 Resources
0 Stars
Publicly accessible

Salton Sea Geothermal Development Nontechnical Barriers to Entry Analysis and Perspectives

The report included in this submission details the nontechnical barriers to entry for development of geothermal resources in the Salton Sea. The Salton Sea provides an economically viable opportunity for replacing the energy imported by California which makes up 25 percent of Cali...

Goodman, D. et al Pacific Northwest National Laboratory

Jun 28, 2022
1 Resources
0 Stars
Publicly accessible

U.S. Atlantic Coast Offshore Windspeed 90m Height High Resolution

The data here provide an estimate of annual average wind speed at 90 meter height above surface for specific offshore regions of the United States. This dataset is a geographic shapefile generated from the original raster data. The original raster data resolution is a 200-meter ce...

Heimiller, D. et al National Renewable Energy Laboratory

Nov 25, 2014
5 Resources
0 Stars
Publicly accessible

Airport and Heliport Setbacks

This dataset represents a first-order quantification of airport and heliport setback requirements based on the Federal Aviation Administration (FAA) 14 CFR Part 77.9. It defines the following FAA notice criteria that we use to create runway buffers. Runways longer than 3,200 feet ...

Geospatial Data Science, N. National Renewable Energy Laboratory (NREL)

Jan 01, 2024
3 Resources
0 Stars
Publicly accessible

Newberry EGS Demonstration: Initial Project Report and Induced Seismicity Mitigation Plan, 2011

This is the first project report and induced seismicity mitigation plan for the Newberry Enhanced Geothermal Systems (EGS) Demonstration project. The primary objectives of this first phase were to obtain necessary permits and comply with all regulations, including NEPA, communica...

Cladouhos, T. et al AltaRock Energy Inc

May 05, 2024
4 Resources
0 Stars
Publicly accessible

TEAMER: AquaHarmonics High Fidelity WEC Sim PTO and Control Model Validation, Sim Model

Collaborative effort between AquaHarmonics, Sandia National Laboratories (SNL), and the National Renewable Energy Laboratory (NREL) to revise and validate Aquaharmonics' full wave to wire model, allowing for reduced uncertainty and increased understanding of design requirements of...

Tom, N. and Leon, J. AquaHarmonics, Inc.

Dec 31, 2021
6 Resources
0 Stars
Publicly accessible

Demand Response Across the Continental US for 2006

This project estimates hourly demand response availability across the continental U.S. for the year 2006. The resulting data set is disaggregated by balancing authority area, end use, and grid application. End uses include 14 categories across residential, commercial, industrial a...

Ma, S. Office of Energy Efficiency and Renewable Energy

Sep 12, 2016
6 Resources
0 Stars
Publicly accessible

Global Value Chain and Manufacturing Analysis on Geothermal Power Plant Turbines

In this study, we have undertaken a robust analysis of the global supply chain and manufacturing costs for components of Organic Rankine Cycle (ORC) Turboexpander and steam turbines used in geothermal power plants. We collected a range of market data influencing manufacturing from...

Akar, S. et al National Renewable Energy Laboratory

Mar 30, 2018
6 Resources
0 Stars
Publicly accessible

TEAMER: Tidal Currents in San Juan Archipelago, Washington

Re-analyzed acoustic Doppler current profiler (ADCP) data originally collected by NOAA CO-OPS (Center for Operational Oceanographic Products and Services) and equivalent point data from Pacific Northwest National Laboratory's FVCOM (Finite Volume Community Ocean Model) model of th...

Polagye, B. et al University of Washington

Dec 15, 2022
4 Resources
0 Stars
Publicly accessible

Tidal Energy Site Characterization East Forelands Alaska

During the summer field season in 2012, Benthic GeoScience Inc. (Benthic) mobilized under contract with Ocean Renewable Power Company (ORPC) in order to conduct precise geospatial measurements of the seafloor accomplishing a preliminary Site Characterization Study for the ORPC Eas...

Worthington, M. National Renewable Energy Laboratory

Apr 01, 2013
2 Resources
0 Stars
Publicly accessible

Experimental Performance of a Laboratory-Scaled Oscillating Surge Wave Energy Converter

This data is a subset of the data from an experimental campaign (https://mhkdr.openei.org/submissions/603) to characterize the hydrodynamics and performance of a laboratory-scale oscillating surge wave energy converter (OSWEC). The device was 85 cm wide, 1.4 meters tall, and 14 cm...

Polagye, B. et al University of Washington

Sep 26, 2024
3 Resources
0 Stars
Publicly accessible

India Direct Normal & Global Horizontal Irradiance Solar Resources

GIS data for India's direct normal irradiance (DNI) and global horizontal irradiance. Provides 10-kilometer (km) solar resource maps and data for India. The 10-km hourly solar resource data were developed using weather satellite (METEOSAT) measurements incorporated into a site-...

Lopez, A. National Renewable Energy Laboratory

Apr 11, 2016
3 Resources
0 Stars
Publicly accessible

Translated System Requirements into PTO Design Requirements (in addition to Component-level metrics) for the HydroAir Power Take Off System

Includes Maximum Cost, Critical Dimensions and Weights, Damping Curve, Rotor Speed Profile Changes, Mechanical Power for a given pressure and airflow, Turbine rpm range and power, Generator input torque, Torque speed curves/profile, Generated electrical power for given input torqu...

Natanzi, S. and Hall, R. Siemens Government Technologies, Inc.

Oct 02, 2020
1 Resources
0 Stars
Publicly accessible

Spooling control design for flight optimization of tethered tidal kites

This submission includes three peer-reviewed (under review) papers from the researchers at North Carolina State University presenting different control-based techniques to maximize the efficiency and robustness of a tethered energy-harvesting kite. Below are the abstracts of each ...

Daniels, J. et al North Carolina State University

Sep 16, 2019
3 Resources
0 Stars
Publicly accessible

Residential HVAC Ductwork Evaluation, Repair, and Replacement Workforce Survey Data (Questions and Responses), Southeastern United States, Nov 2025 to Jan 2026

This submission contains two data resources associated with an HVAC workforce engagement study conducted by the Southeast Energy Efficiency Alliance (SEEA) and the Florida Solar Energy Center (FSEC) as part of their ?Optimizing Heat Pump Readiness? Building America project. The da...

Fenaughty, K. et al Southeast Energy Efficiency Alliance

Nov 18, 2025
1 Resources
0 Stars
In progress

<< Previous 9 10 11 12 13 14 15 16 17 18 Next >>