Search OEDI Data

Showing results 1 - 20 of 20.
Show results per page.
Order by:
Available Now:
Clear All Filters ×
Research Areas
Accessibility
Data Type
Organization
Source
"Unit Costs"×
Code×

WaterTAP3 Model Input Data for NAWI's Eight Source Water Baseline Analyses

This folder contains the input data for the WaterTAP3 model that was used for the eight NAWI (National Alliance for Water Innovation) source water baselines studies published in the Environmental Science and Technology special issue: Technology Baselines and Innovation Priorities ...
Miara, A. et al National Renewable Energy Laboratory
Feb 01, 2022
16 Resources
0 Stars
Publicly accessible

The Foundational Industry Energy Dataset: Unit-level Characterization and Derived Energy Estimates for Industrial Facilities in 2017

The Foundational Industry Energy Dataset (FIED) addresses several of the areas of growing disconnect between the demands of industrial energy analysis and the state of industrial energy data by providing unit-level characterization by facility. Each facility is identified by a uni...
McMillan, C. et al National Renewable Energy Laboratory (NREL)
Jul 01, 2024
4 Resources
0 Stars
Publicly accessible

Deep Direct-Use Feasibility Study Economic Analysis using GEOPHIRES for West Virginia University

This dataset contains all the inputs used and output produced from the modified GEOPHIRES for the economic analysis of base case hybrid GDHC system, improved hybrid GDHC system with heat pump and for hot water GDHC. Software required: Microsoft Notepad, Microsoft Excel and GEOPHI...
Garapati, N. West Virginia University
Jan 09, 2020
8 Resources
0 Stars
Publicly accessible

Renewable Energy Potential Model: Priority Geothermal Leasing Areas ReEDs Results

This dataset contains the results of a study conducted by the National Renewable Energy Laboratory (NREL) to identify potential future priority geothermal leasing areas on Bureau of Land Management (BLM) and United States Forest Service (USFS) lands. The analysis uses the Regional...
Smith, F. et al National Renewable Energy Laboratory
May 20, 2024
4 Resources
0 Stars
Publicly accessible

MHK Levelized Cost of Energy (LCOE) Guidance and Techno-Economic Analysis Materials

Useful information and tools for calculating the Levelized Cost of Energy (LCOE) and MHK Cost Breakdown Structure. Includes a structure for calculating the capital expenditures and operating costs of a marine energy technology or device, reference resource data for both wave and ...
Jenne, S. and Baca, E. National Renewable Energy Laboratory
Nov 08, 2019
7 Resources
0 Stars
Publicly accessible

Pilgrim Hot Springs: GEOPHIRES Inputs and Outputs for Direct-Use Geothermal District Heating and Cooling

This dataset includes files for a techno-economic analysis conducted using the GEOPHIRES simulator to examine the feasibility of expanding a larger district heating site in a remote location: Pilgrim Hot Springs, Alaska. Files included here are GEOPHIRES inputs and outputs for fiv...
Pauling, H. et al National Renewable Energy Laboratory
Mar 21, 2024
21 Resources
0 Stars
Publicly accessible

HERO WEC V1.0 Electrical PTO Deployment Data and Analysis

This submission includes the processed and raw field electrical data from NREL's August 2022 HERO WEC (hydraulic and electric reverse osmosis wave energy converter) deployment at Jennette's Pier for the electrical PTO (power take-off).
Nakhai, A. et al National Renewable Energy Laboratory
Aug 12, 2022
4 Resources
0 Stars
Publicly accessible

TEAMER: Public Initial Optimization of a Vessel-mounted Removable Current Energy Converter

This project focuses on developing a numerical tool to estimate the Levelized Cost of Energy (LCOE) for vessel-mounted hydrokinetic turbines. By leveraging open-source software and public-domain data, the tool evaluates energy capture and costs for deploying turbines on vessels in...
Forbush, D. et al Sandia National Laboratories
Jul 31, 2024
4 Resources
0 Stars
Publicly accessible

Distributed Generation Market Demand (dGen) model

The Distributed Generation Market Demand (dGen) model simulates customer adoption of distributed energy resources (DERs) for residential, commercial, and industrial entities in the United States or other countries through 2050. The dGen model can be used for identifying the sector...
Stanley, T. et al National Renewable Energy Laboratory (NREL)
Oct 16, 2020
4 Resources
1 Stars
Publicly accessible

Wind and Structural Loads on Heliostats

Wind loading is a main contributor to structural design costs of Concentrating Solar Power (CSP) collectors, such as heliostats. These structures must resist the mechanical forces generated by turbulent wind. At the same time, the reflector surfaces must exhibit the necessary rigi...
Egerer, U. et al National Laboratory of the Rockies (NLR)
Dec 24, 2025
4 Resources
0 Stars
Publicly accessible

Wind and Structural Loads on Parabolic Trough Solar Collectors at Nevada Solar One

Wind loading is a main contributor to structural design costs of Concentrating Solar Power (CSP) collectors, such as heliostats and parabolic troughs. These structures must resist the mechanical forces generated by turbulent wind. At the same time, the reflector surfaces must exhi...
Egerer, U. et al National Renewable Energy Laboratory (NREL)
Oct 01, 2021
4 Resources
0 Stars
Publicly accessible

2022 Annual Technology Baseline (ATB) Cost and Performance Data for Transportation Technologies

The 2022 Transportation Annual Technology Baseline (ATB) provides detailed cost and performance data, estimates, and assumptions for vehicle and fuel technologies in the United States. It includes current and projected estimates: time-series through 2050 for light, medium, and hea...
Vimmerstedt, L. et al National Renewable Energy Laboratory (NREL)
Nov 17, 2023
5 Resources
0 Stars
Publicly accessible

2024 Annual Technology Baseline (ATB) Cost and Performance Data for Transportation Technologies

The 2024 Transportation Annual Technology Baseline (ATB) provides detailed cost and performance data, estimates, and assumptions for vehicle and fuel technologies in the United States. It includes current and projected estimates: time-series through 2050 for light, medium, and hea...
Vimmerstedt, L. et al National Renewable Energy Laboratory (NREL)
Nov 11, 2024
5 Resources
0 Stars
Publicly accessible

TEAMER: Dynamometer Testing of a Magnetically Geared Electrical Generator

Ocean Renewable Power Company's (ORCP) RivGen device is a horizontal cross-flow turbine featuring a proprietary power takeoff unit. This system has been proven in real-world conditions in Alaska and is now the longest operating hydrokinetic project in the Americas. ORPC systems ty...
Bassett, C. and Gibbs, P. University of Washington Applied Physics Lab
Aug 14, 2025
5 Resources
0 Stars
Publicly accessible

Admiralty Inlet Hub-Height Turbulence Measurements from June 2012

This data is from measurements at Admiralty Head, in Admiralty Inlet. The measurements were made using an IMU equipped ADV mounted on a mooring, the 'Tidal Turbulence Mooring' or 'TTM'. The inertial measurements from the IMU allows for removal of mooring motion in post processing....
Kilcher, L. National Renewable Energy Laboratory
Jun 18, 2012
7 Resources
0 Stars
Publicly accessible

LLMs for EV Infrastructure Permitting

The Electric Vehicle (EV) charging permitting processes' database is a novel, multi-jurisdictional resource designed to contain the required codes and compliances in a structured database. Within this database are three tables, each structured with 287 columns, designed to capture...
Renganathan, U. et al National Laboratory of the Rockies (NLR)
Sep 24, 2025
12 Resources
1 Stars
Publicly accessible

INTEGRATE Inverse Network Transformations for Efficient Generation of Robust Airfoil and Turbine Enhancements

The INTEGRATE (Inverse Network Transformations for Efficient Generation of Robust Airfoil and Turbine Enhancements) project is developing a new inverse-design capability for the aerodynamic design of wind turbine rotors using invertible neural networks. This AI-based design techno...
Vijayakumar, G. et al National Renewable Energy Laboratory (NREL)
May 04, 2021
8 Resources
0 Stars
Publicly accessible

Admiralty Inlet Advanced Turbulence Measurements: May 2015

This data is from measurements at Admiralty Head, in Admiralty Inlet (Puget Sound) in May of 2015. The measurements were made using Inertial Motion Unit (IMU) equipped ADVs mounted on a 'StableMoor' (Manufacturer: DeepWater Buoyancy) buoy and a Tidal Turbulence Mooring (TTM). Thes...
Kilcher, L. National Renewable Energy Laboratory
May 18, 2015
18 Resources
0 Stars
Publicly accessible

Admiralty Inlet Advanced Turbulence Measurements: June 2014

This data is from measurements at Admiralty Head, in Admiralty Inlet (Puget Sound) in June of 2014. The measurements were made using Inertial Motion Unit (IMU) equipped ADVs mounted on Tidal Turbulence Mooring's (TTMs). The TTM positions the ADV head above the seafloor to make mid...
Kilcher, L. National Renewable Energy Laboratory
Jun 30, 2014
26 Resources
0 Stars
Publicly accessible

ARPA-E Grid Optimization (GO) Competition Challenge 3

Synthetic Input Data and Team Results for the GO Competition Challenge 3 for Events 1 4 and the Sandbox, along with problem and format descriptions and code to validate data and solutions, are available here. Data for industry scenarios will not be made public. The Grid Optimizat...
Elbert, S. et al Pacific Northwest National Laboratory
May 02, 2024
39 Resources
1 Stars
Publicly accessible