Search OEDI Data

Sustainable Self-Propping Shear Zones in EGS: Chlorite, Illite, and Biotite Rates and Report

Spreadsheet containing chlorite, illite, and biotite rate data and rate equations that can be used in reactive transport simulations. Submission includes a report on the development of the rate laws.

Carroll, S. and Smith, M. Lawrence Livermore National Laboratory

Nov 06, 2015
2 Resources
0 Stars
Publicly accessible

Chlorite Dissolution Kinetics at Variable pH and Temperatures up to 275C

FY13 annual report describing the calculations and results associated with the data and dissolution rate contained in "Chlorite Kinetic Dissolution Data and Rate" (linked below).

Carroll, S. and Smith, M. Lawrence Livermore National Laboratory

Oct 01, 2013
2 Resources
0 Stars
Publicly accessible

Chlorite Dissolution Rates From 25 to 275 degrees and pH 3 to 10

We have calculated a chlorite dissolution rate equation at far from equilibrium conditions by combining new data (20 experiments at high temperature) with previously published data Smith et al. 2013 and Lowson et al. 2007. All rate data (from the 127 experiments) are tabulated in...

Lawrence Livermore National Laboratory

Sep 27, 2013
2 Resources
0 Stars
Publicly accessible

Chlorite, Biotite, Illite, Muscovite and Feldspar Dissolution Kinetics at Variable pH and Temperatures up to 280 deg C

Chemical reactions pose an important but poorly understood threat to EGS long-term success because of their impact on fracture permeability. This report summarizes the dissolution rate equations for layered silicates where data were lacking for geothermal systems. Here we report ...

Carroll, S. et al Lawrence Livermore National Laboratory

Feb 24, 2017
2 Resources
0 Stars
Publicly accessible

DASH Slow Strain Rates from Brady Hot Springs Geothermal Field during PoroTomo Deployment Period

This submission contains slow strain rates summed to radians over 30 second intervals [rad/s] derived from horizontal distributed acoustic sensing measurements (DASH) of Brady geothermal field during PoroTomo deployment (2016-Mar-14 to 2016-Mar-26). There is one file correspondin...

Reinisch, E. et al University of Wisconsin

Jun 27, 2018
20 Resources
0 Stars
Publicly accessible

Chlorite Dissolution Rates

Spreadsheets provides measured chlorite rate data from 100 to 300 degrees C at elevated CO2. Spreadsheet includes derived rate equation.

Carroll, S. Lawrence Livermore National Laboratory

Jul 01, 2013
1 Resources
0 Stars
Publicly accessible

Washington Play Fairway Analysis Analysis of High Precision GPS Time Series and Strain Rates for the Cascade Range

Global Positioning System (GPS) time series from the National Science Foundation (NSF) Earthscope's Plate Boundary Observatory (PBO) and Central Washington University's Pacific Northwest Geodetic Array (PANGA). GPS station velocities were used to infer strain rates using the "spli...

Swyer, M. AltaRock Energy Inc

Feb 22, 2015
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Fault Shear Reactivation Experimental Data for Fluid Injection-Rate Controls on Seismic Moment

Included are experimental data recorded from shear experiments that specifically explore the link between fluid-injection rate and seismic moment resulting from shear reactivation of laboratory faults. Raw mechanical data from three experiments are included alongside corresponding...

Roseboom, M. et al Pennsylvania State University

Nov 07, 2023
6 Resources
0 Stars
Publicly accessible

Utah FORGE: Fiber Optic Cumulative Strain Change and Strain Change Rate Data From Well 16A Stimulation at Well 16B

This dataset includes Rayleigh Frequency Shift (RFS) Distributed Strain Sensing (DSS) cumulative strain change and change rate data. The data was acquired during the stimulation of Utah FORGE Well 16A(78)-32 in April 2024 via fiber installed in Well 16B(78)-32. The fiber optic da...

Khatara, S. et al Neubrex Energy Services (US), LLC

Nov 06, 2024
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16A(78)-32/Well16B(78)-32 Circulation Test Data

This dataset encompasses the collected data and associated reports from the low-rate injection circulation test conducted on wells 16A(78)-32 and 16B(78)-32 in July 2023 at Utah FORGE. It includes comprehensive raw circulation data, captured by Pason and Schlumberger (SLB). The da...

Mclennan, J. and Xing, P. Energy and Geoscience Institute at the University of Utah

Jul 19, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Fault Reactivation Through Fluid Injection Induced Seismicity Laboratory Experiments

Included are results from shear reactivation experiments on laboratory faults pre-loaded close to failure and reactivated by the injection of fluid into the fault. The sample comprises a single-inclined-fracture (SIF) transecting a cylindrical sample of Westerly granite. All expe...

Yu, J. et al Penn State University

Jul 01, 2023
27 Resources
0 Stars
Publicly accessible

Magnetic Test Loop Particle Retention Data for REE Extraction from Geothermal Fluids

Measurements of particle extraction efficiency under various flow rate and magnetic power conditions

McGrail, P. and Liu, J. Pacific Northwest National Laboratory

Jul 27, 2018
2 Resources
0 Stars
Publicly accessible

Microhole Test Data

Drilling results from the microhole project at the Sandia High Operating Temperature test facility. The project is seeking to help reduce the cost of exploration and monitoring of geothermal wells and formations by drilling smaller holes. The tests were part of a control algorith...

Su, J. Sandia National Laboratories

May 23, 2016
5 Resources
0 Stars
Publicly accessible

Illite Dissolution Rates and Equation (100 to 280 deg C)

The objective of this suite of experiments was to develop a useful kinetic dissolution expression for illite applicable over an expanded range of solution pH and temperature conditions representative of subsurface conditions in natural and/or engineered geothermal reservoirs. Usi...

Carroll, S. Lawrence Livermore National Laboratory

Oct 17, 2014
1 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: SIMFIP Notch-164 GRL Paper

Characterizing the stimulation mode of a fracture is critical to assess the hydraulic efficiency and the seismic risk related to deep fluid manipulations. We have monitored the three-dimensional displacements of a fluid-driven fracture during water injections in a borehole at ~1.5...

Guglielmi, Y. Lawrence Berkeley National Laboratory

Sep 24, 2020
9 Resources
0 Stars
Publicly accessible

Brady Geothermal Field Well Pumping Data During Deployment

Contains pumping data associated with the wells used in the 2016 Spring Campaign led partially by UW Madison, LBNL, and LLNL scientists. The well coordinates and the depths to the pressure sensors used in the pumping wells can be found at the link "Coordinates and Sensor Depths" b...

Feigl, K. University of Wisconsin

Mar 30, 2016
3 Resources
0 Stars
Publicly accessible

Brady's Geothermal Field Analysis of Pressure Data

*This submission provides corrections to GDR Submissions 844 and 845* Poroelastic Tomography (PoroTomo) by Adjoint Inverse Modeling of Data from Hydrology. The 3 *csv files containing pressure data are the corrected versions of the pressure dataset found in Submission 844. The ...

Lim, D. University of Wisconsin

Mar 17, 2017
6 Resources
0 Stars
Publicly accessible

Washington Play Fairway Analysis Geothermal Heat and Permeability Potential Geodatabases

This file contains file geodatabases of the Mount St. Helens seismic zone (MSHSZ), Wind River valley (WRV) and Mount Baker (MB) geothermal play-fairway sites in the Washington Cascades. The geodatabases include input data (feature classes) and output rasters (generated from modeli...

Norman, D. et al Washington Division of Geology and Earth Resources

Dec 15, 2015
5 Resources
0 Stars
Publicly accessible

Utah FORGE Project 2439: A Multi-Component Approach to Characterizing In-Situ Stress

Core-based in-situ stress estimation, Triaxial Ultrasonic Velocity (labTUV) data, and Deformation Rate Analysis (DRA) data for Utah FORGE well 16A(78)-32 using triaxial ultrasonic velocity and deformation rate analysis. Report documenting a multi-component approach to characterizi...

Bunger, A. et al Battelle Memorial Institute

Dec 13, 2022
4 Resources
0 Stars
Publicly accessible

Fallon FORGE: Geodetic Data

Fallon FORGE InSAR and geodetic GPS deformation data. InSAR shapefiles are packaged together as .MPK (ArcMap map package, compatible with other GIS platforms), and as .CSV comma-delimited plaintext. GPS data and additional metadata are linked to the Nevada Geodetic Laboratory data...

Blankenship, D. et al Sandia National Laboratories

Feb 01, 2018
8 Resources
0 Stars
Publicly accessible

Utah FORGE Well 16A(78)-32 Stimulation Data (April, 2022)

This is a set of data related to the stimulation program at Utah FORGE well 16A(78)-32 during April, 2022. This includes daily reports, 1 second Pason data, tracer data, and shear stimulation data and information including a report of an evolving prognosis for the stimulation oper...

McLennan, J. Energy and Geoscience Institute at the University of Utah

May 18, 2022
11 Resources
0 Stars
Publicly accessible

Utah FORGE: Neubrex Well 16B(78)-32 Circulation Test Fiber Optics Monitoring Data and Reports July, 2023

This dataset features Distributed Acoustic Sensing (DAS) and fiber optics monitoring data acquired by Neubrex Energy Services during the Utah FORGE Well 16B(78)-32 circulation test in July 2023. DAS and fiber optic monitoring data include absolute strain, strain change, strain ch...

Juric, D. and Guzik, A. Energy and Geoscience Institute at the University of Utah

Oct 31, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE Well 16A(78)-32 Stage 1 Pressure Falloff Analysis

This is an analysis of the pressure falloff in stage 1 fracture stimulation of FORGE well 16A(78)-32. The objective of this research is to understand the information content of the well stimulation data of FORGE Well 16A(78)-32. The Stage 1 step-rate test, a variant of the classic...

Kazemi, H. et al Colorado School of Mines

Aug 04, 2022
1 Resources
0 Stars
Publicly accessible

Laboratory Experiments Examining the Effect of Thermal and Mechanical Processes on Hydraulic Transmissivity Evolution

Using laboratory slide-hold-slide experiments, at temperatures from 22 to 200 degrees C, to examine effects of fracture reactivation and quasi-static loading on the evolution of fluid transport properties of simulated fractures in Westerly granite. At all temperatures, the in-plan...

Lockner, D. et al U.S. Geological Survey

Apr 03, 2023
2 Resources
0 Stars
Publicly accessible

Geothermal Life Cycle Calculator

This calculator is a handy tool for interested parties to estimate two key life cycle metrics, fossil energy consumption (Etot) and greenhouse gas emission (ghgtot) ratios, for geothermal electric power production. It is based solely on data developed by Argonne National Laborator...

Sullivan, J. Argonne National Laboratory

Mar 11, 2014
1 Resources
0 Stars
Publicly accessible

1 2 3 4 5 Next >>