Search OEDI Data

Showing results 1 - 25 of 373.
Show results per page.
Order by:
Available Now:
Research Areas
Accessibility
Data Type
Organization
Source
"optimal optical performance"×

Wind and Structural Loads on Parabolic Trough Solar Collectors at Nevada Solar One

Wind loading is a main contributor to structural design costs of Concentrating Solar Power (CSP) collectors, such as heliostats and parabolic troughs. These structures must resist the mechanical forces generated by turbulent wind. At the same time, the reflector surfaces must exhi...
Egerer, U. et al National Renewable Energy Laboratory (NREL)
Oct 01, 2021
4 Resources
0 Stars
Publicly accessible

LCOE Content Model for the Heaving Point Absorber Buoy

This is the LCOE analysis spreadsheet and content model for the heaving point absorber buoy developed for controls purposes. The cost assessment was done on a wave-farm of 100-units.
Previsic, M. and Karthikeyan, A. Re Vision Consulting
Jul 14, 2017
3 Resources
0 Stars
Publicly accessible

Spooling control design for flight optimization of tethered tidal kites

This submission includes three peer-reviewed (under review) papers from the researchers at North Carolina State University presenting different control-based techniques to maximize the efficiency and robustness of a tethered energy-harvesting kite. Below are the abstracts of each ...
Daniels, J. et al North Carolina State University
Sep 16, 2019
3 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 1a Tensor Strainmeter Data for the April, 2022 Stimulation of Well 16A(78)-32

Data from two Tensor Optical Fiber Strainmeters that were operational during Stages 1, 2, and 3 of the April, 2022 stimulation of well 16A(78)-32. Each csv file contains data from each stimulation stage (stage1, stage2, stage3) for both Phase 1a strainmeter installations (FS01, f...
DeWolf, S. and Murdoch, L. Clemson University
Sep 15, 2022
8 Resources
0 Stars
Publicly accessible

Advanced Control Systems for Wave Energy Converters

This submission contains several papers, a final report, descriptions of a theoretical framework for two types of control systems, and descriptions of eight real-time flap load control policies with the objective of assessing the potential improvement of annual average capture eff...
Scruggs, J. et al Resolute Marine Energy, Inc.
Jan 30, 2017
4 Resources
0 Stars
Publicly accessible

TEAMER: Experimental Characterization of a Laboratory-Scaled Oscillating Surge Wave Energy Converter

This data is a result of an experimental campaign to characterize the hydrodynamics and performance of a laboratory-scale oscillating surge wave energy converter (OSWEC). The device was 85 cm wide, 1.4 meters tall, and 14 cm thick and was tested in the Sea Wave Environmental Lab (...
Lydon, B. et al University of Washington
Apr 05, 2024
1 Resources
0 Stars
Publicly accessible

Machine Learning-Assisted High-Temperature Reservoir Thermal Energy Storage Optimization: Numerical Modeling and Machine Learning Input and Output Files

This data set includes the numerical modeling input files and output files used to synthesize data, and the reduced-order machine learning models trained from the synthesized data for reservoir thermal energy storage site identification. In this study, a machine-learning-assiste...
Jin, W. et al Idaho National Laboratory
Apr 15, 2022
4 Resources
0 Stars
Publicly accessible

TEAMER: A Tow Body Optical Camera System

Archive consists of design drawings, assembly instructions, and bill of materials (BOM) for a Igiugig Village Council (IVC)/Ocean Renewable Power company (ORPC) tow body camera system for underwater environmental monitoring using optical cameras. This work was conducted by the Uni...
Joslin, J. et al University of Washington
Apr 30, 2021
6 Resources
0 Stars
Publicly accessible

Surface Meteorological Station UND 10m, (2) Sonics 3m 10m, (2) T/RH 3m 10m, Physics site-11 Raw Data

**Overview** The data included features wind, temperature, and turbulence measurements. **Data Details** Each met station (met.z18, met.z19, met.z21, and met.z23) consists of multiple levels of three-dimensional ultrasonic anemometers, RM Young 81000 (sampling frequency = 20 ...
Fernando, J. et al Wind Energy Technologies Office (WETO)
Feb 14, 2016
1 Resources
0 Stars
Publicly accessible

Surface Meteorological Station UND 17m, (3) Sonics 3m 10m 17m, (2) T/RH 3m 17m, Physics site-2 Raw Data

**Overview** The data included features wind, temperature, and turbulence measurements. **Data Details** Each met station (met.z18, met.z19, met.z21, and met.z23) consists of multiple levels of three-dimensional ultrasonic anemometers, RM Young 81000 (sampling frequency = 20 ...
Fernando, J. et al Wind Energy Technologies Office (WETO)
Feb 14, 2016
1 Resources
0 Stars
Publicly accessible

Surface Meteorological Station UND 10m, (2) Sonics 3m 10m, (2) T/RH 3m 10m (1) Licor 3m, Physics site-1 Raw Data

**Overview** The data included features wind, temperature, and turbulence measurements. **Data Details** Each met station (met.z18, met.z19, met.z21, and met.z23) consists of multiple levels of three-dimensional ultrasonic anemometers, RM Young 81000 (sampling frequency = 20 ...
Fernando, J. et al Wind Energy Technologies Office (WETO)
Feb 13, 2016
1 Resources
0 Stars
Publicly accessible

Surface Meteorological Station UND 21m, (3) Sonics 3m 10m 21m, (2) T/RH 3m 21m, Physics site-6 Raw Data

**Overview** The data included features wind, temperature, and turbulence measurements. **Data Details** Each met station (met.z18, met.z19, met.z21, and met.z23) consists of multiple levels of three-dimensional ultrasonic anemometers, RM Young 81000 (sampling frequency = 20 ...
Fernando, J. et al Wind Energy Technologies Office (WETO)
Feb 14, 2016
1 Resources
0 Stars
Publicly accessible

TEAMER: Experimental performance characterization of a shrouded axial-flow turbine

Sitkana has developed a shrouded hydrokinetic turbine with a modular, low-cost design that can be scaled to meet the needs of remote communities. With technical support from the University of Washington, Sitkana sought to experimentally characterize the mechanical power and struct...
McMullan, L. et al University of Washington
Oct 20, 2023
2 Resources
0 Stars
Publicly accessible

LCOE Baseline for RME Surge WEC Device

This submission includes all the data to support an LCOE baseline assessment for the Resolute Marine Energy (RME) Surge WEC device.
Previsic, M. et al Re Vision Consulting
Jul 19, 2017
4 Resources
0 Stars
Publicly accessible

Linearized Distribution Optimal Power Flow for OEDI SI

This research is to meant to demonstrate the OEDI SI use case for distributed optimal power flow (DOPF). The goal was to formulate the optimal power flow problem in the distribution system for active and reactive power setpoints of PV systems using topology information and voltage...
Sadnan, R. et al Pacific Northwest National Laboratory
Oct 03, 2023
1 Resources
0 Stars
Publicly accessible

WEC Controls Optimization Final Report

The over-arching project objective is to fully develop and validate optimal controls frameworks that can subsequently be applied widely to different WEC devices and concepts. Optimal controls of WEC devices represent a fundamental building block for WEC designers that must be cons...
Previsic, M. and Karthikeyan, A. Re Vision Consulting
Aug 26, 2020
1 Resources
0 Stars
Publicly accessible

Error-Level-Controlled Synthetic Forecasts for Renewable Generation

Renewable energy resources, including solar and wind energy, play a significant role in sustainable energy systems. However, the inherent uncertainty and intermittency of renewable generation pose challenges to the safe and efficient operation of power systems. Recognizing the imp...
Zhang, X. et al National Renewable Energy Laboratory (NREL)
Jun 01, 2021
3 Resources
0 Stars
Publicly accessible

TEAMER: Cross-flow Turbine Hydrodynamics

The objective of this work is to validate RANS and LES computations of cross-flow turbine hydrodynamics using laboratory scale measurements. Validation involves the comparison of time-and phase averaged performance metrics and flowfields across the widest practical range of turbin...
Athair, A. et al University of Washington (NNMREC)
Mar 25, 2025
7 Resources
0 Stars
Publicly accessible

Analogue Experimental Observations of Fluid-Filled Fracture Dynamics for Geological System

Bubble cavitation in fluid filled fractures and bubble gas at the fracture tip open fractures with different fracture tips.
Cao, H. National Renewable Energy Laboratory
Feb 05, 2020
1 Resources
0 Stars
In curation

STRESSINVERSE Software for Stress Inversion

The STRESSINVERSE code uses an iterative method to find the nodal planes most consistent with the stress field given fault frictional properties. STRESINVERSE inverts the strike, rake and dip from moment tensor solutions for the in-situ state of stress. The code iteratively solves...
Gritto, R. Array Information Technology
Oct 31, 2018
1 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 2: Wireline Geophysical Well Logs

This is the full wireline geophysical datasets for characterization of the EGS Collab Experiment #2 testbed. A metadata fill is included within the dataset explaining the logs, fracture picks, etc. Eleven boreholes were drilled for this testbed and each one was logged with north s...
Ulrich, C. and Schwering, P. Lawrence Berkeley National Laboratory
Jul 09, 2019
1 Resources
0 Stars
Publicly accessible

SMP and Fracture Modeling

The problem of loss circulation in geothermal wells is inherently challenging due to high temperatures, brittle rocks, and presence of abundant fractures. Because of the inherent challenges in geothermal environments, there are limitations in selecting proper lost circulation mate...
Salehi, S. et al University of Oklahoma
Oct 01, 2021
4 Resources
0 Stars
Publicly accessible

Optimization of Marine Energy Conversion Systems Through Modeling, Optimization, and CHIL Validation

The work aims to achieve optimal tidal energy conversion through a comprehensive approach of modeling, optimization, and control hardware-in-the-loop (CHIL) validation. By developing accurate models and employing optimization techniques, it seeks to identify efficient system confi...
Luo, F. et al Stony Brook University
Jul 17, 2023
6 Resources
0 Stars
Publicly accessible

Development of Integrated Screening, Cultivar Optimization, and Verification Research (DISCOVR)

The objective of the DISCOVR consortia is to develop an integrated algae strain screening platform for the discovery of high-productivity and resilient strains of algae that can be cultivated outdoors year-round via crop rotation. The data includes annual weather data, algae culti...
Knoshaug, E. National Renewable Energy Laboratory (NREL)
Sep 01, 2016
12 Resources
0 Stars
Publicly accessible

OPFLearnData: Dataset for Learning AC Optimal Power Flow

The datasets are resulting from OPFLearn.jl, a Julia package for creating AC OPF datasets. The package was developed to provide researchers with a standardized way to efficiently create AC OPF datasets that are representative of more of the AC OPF feasible load space compared to t...
Joswig-Jones. . et al National Renewable Energy Laboratory
Oct 26, 2021
12 Resources
0 Stars
Publicly accessible
12345Next >>