Search OEDI Data
Showing results 1 - 18 of 18.
Show
results per page.
Order by:
Availability:
Research Areas
Accessibility
Data Type
Organization
Source
Chemical, Calcium Phosphate Cements for Geothermal Wells Corrosion Protection, Bond Strength and Matrix Self-Healing
The data set shows performance of economical calcium phosphate cement (Fondu) blended with fly ash, class F (FAF) in carbon steel corrosion protection tests (corrosion rate, corrosion current and potential), bond and matrix strength, as well as matrix strength recovery after impos...
Sugama, T. Brookhaven National Laboratory
Sep 26, 2017
2 Resources
Publicly accessible
2 Resources
Publicly accessible
Summary of Cement Formulations Tested by BNL for Self-Healing Ability Tests Conditions and Data
A table of cement formulations tested by Brookhaven National Laboratory in 2016-2017 in the frame of the "Self-healing and Re-Adhering Cements with Improved Toughness at Casing and Formation Interfaces for Geothermal Wells" project.
Sugama, T. Brookhaven National Laboratory
Sep 27, 2017
2 Resources
Publicly accessible
2 Resources
Publicly accessible
High-Temperature Inorganic Self-Healing Inorganic Cement Composites
The data files below summarize the results from various experiments testing properties of high-temperature self-healing inorganic cement composites. These properties include cement-carbon steel bond strength, Young's modulus recovery, matrix recovery strength, and compressive stre...
Pyatina, T. and Sugama, T. Brookhaven National Laboratory
Sep 13, 2017
5 Resources
Publicly accessible
5 Resources
Publicly accessible
Environmental Protection Agency (EPA) Renewable Energy Cost Database
The database is a compilation of existing cost data for wind, solar photovoltaic (solar PV), solar thermal (CSP), and geothermal energy technologies, including historical costs and projected costs for each. The data sources and references used to compile this information are inclu...
Hill, G. and Agency, E. National Renewable Energy Laboratory
Dec 31, 2009
2 Resources
In curation
2 Resources
In curation
Fuel Economy Data
Fuel economy data are the result of vehicle testing done at the Environmental Protection Agency's National Vehicle and Fuel Emissions Laboratory in Ann Arbor, Michigan, and by vehicle manufacturers with oversight by EPA. The Find a Car vehicle table contains fuel economy inform...
Webmaster, F. and (EERE), O. Oak Ridge National Laboratory
Nov 25, 2014
2 Resources
In curation
2 Resources
In curation
M3 Wave DMP/APEX WEC Numerical Survivability Report Baseline Geometry
Summary of numerical survivability modeling method for the baseline geometry of the Delos-Reyes Morrow Pressure Device (DMP), commercialized by M3 Wave LLC as "APEX."
Roberts, J. et al M3 Wave
Aug 16, 2016
2 Resources
Publicly accessible
2 Resources
Publicly accessible
EPA: ENERGY STAR Labeled Buildings and Plants (2009)
This dataset contains Buildings and Plants labeled ENERGY STAR for 2009. It also contains a list of the buildings in the top 25 cities.
### License Info
From http://www.energystar.gov/index.cfm?c=home.privacy_policy
Information presented on this Web site is considered publi...
Brodt-Giles, D. and (EPA), E. National Renewable Energy Laboratory
Jul 29, 2014
2 Resources
In curation
2 Resources
In curation
eGRID2007 Version 1.1 All Files
The Emissions & Generation Resource Integrated Database (eGRID) is a comprehensive inventory of environmental attributes of electric power systems. The preeminent source of air emissions data for the electric power sector, eGRID is based on available plant-specific data for all U....
Wood, J. and (EPA), E. National Renewable Energy Laboratory
Jan 25, 2009
2 Resources
In curation
2 Resources
In curation
LandRAY PTO Testing Utilizing the NREL NWTC 5MW Dynamometer
The overarching project objective is to demonstrate the feasibility of using an innovative PowerTake-Off (PTO) Module in Columbia Power's utility-scale wave energy converter (WEC). The PTO Module uniquely combines a large-diameter, direct-drive, rotary permanent magnet generator; ...
Lenee-Bluhm, P. and Rhinefrank, K. Columbia Power Technologies, Inc.
Jun 13, 2016
3 Resources
Publicly accessible
3 Resources
Publicly accessible
LandRAY PTO Test Plans with NREL NWTC 5 MW Dynamometer
The overarching project objective is to demonstrate the feasibility of using an innovative PowerTake-Off (PTO) Module in Columbia Power's utility-scale wave energy converter (WEC). The PTO Module uniquely combines a large-diameter, direct-drive, rotary permanent magnet generator; ...
Prudell, J. et al Columbia Power Technologies, Inc.
Feb 29, 2016
5 Resources
Publicly accessible
5 Resources
Publicly accessible
WISE-CASING: Frequency Domain EM Data from Cymric Oil Field, CA
Cymric oil field frequency domain electromagnetic (FEM) data with two parts of data labeled Part 1 and Part 2. Part 1 utilizes an electrical source line parallel to the receiver line, while Part 2 utilizes an electrical source line at a 75 deg angle to the receiver line. Data are ...
Wang, J. et al Lawrence Berkeley National Laboratory
Apr 30, 2019
11 Resources
Publicly accessible
11 Resources
Publicly accessible
WISE-CASING: DC Simulation at Containment and Monitoring Institute (CaMI), Calgary, Canada
For the model calculation we applied EM3D using completion diagram of CaMI site and a background resistivity consistent with the borehole logs. It was also important to use the accurate position of the return electrode. We note that for the data fit the code also incorporated we...
Wang, J. and Wilt, M. Lawrence Berkeley National Laboratory
Apr 30, 2019
7 Resources
Publicly accessible
7 Resources
Publicly accessible
WISE-CASING: Time Domain Reflectometry Data from Cymric Field, CA
The objective of this field test is to validate several technologies for non-invasive well integrity assessment using existing wells with a known completion. The tests were made at the Cymric oil field, which is a steam flood operation. The wells therefore undergo similar downhole...
Wang, J. Lawrence Berkeley National Laboratory
Feb 21, 2019
5 Resources
Publicly accessible
5 Resources
Publicly accessible
Global CFDDA-based Onshore and Offshore Wind Potential Supply Curves by Country, Class, and Depth (quantities in GW and PWh)
This dataset contains global onshore and offshore wind supply curves based on a resource assessment performed at the National Renewable Energy Laboratory (NREL) based on the National Center for Atmospheric Research's (NCAR) Climate Four Dimensional Data Assimilation (CFDDA) mesosc...
Sullivan, P. and Laboratory, N. National Renewable Energy Laboratory
Nov 25, 2014
1 Resources
In curation
1 Resources
In curation
Competing Use Analysis for Offshore Renewables and Subsea Cables
Demand for abundant and diverse resources in the oceans is growing, necessitating marine spatial planning. To inform development of Marine Hydrokinetic (MHK) and Offshore Wind (OSW) resources, the Department of Energy (DOE) has asked NREL to identify the competing uses areas betwe...
Best, B. and Kilcher, L. National Renewable Energy Laboratory
Aug 29, 2019
3 Resources
Publicly accessible
3 Resources
Publicly accessible
StingRAY WEC Risk Register
Risk Registers for major subsystems of the StingRAY WEC completed in compliance with the DOE Risk Management Framework developed by NREL.
Rhinefrank, K. Columbia Power Technologies, Inc.
Feb 24, 2017
18 Resources
Publicly accessible
18 Resources
Publicly accessible
Hourly Energy Emission Factors for Electricity Generation in the United States
Monthly average hourly CO2, NOx, and SO2 emission factors for each U.S. eGRID subregion.
This project utilized GridViewTM, an electric grid dispatch software package, to estimate hourly emission factors for all of the [eGRID](https://www.epa.gov/egrid) subregions in the continenta...
Studer, D. National Renewable Energy Laboratory
Nov 25, 2014
25 Resources
Curated
25 Resources
Curated
StingRAY Failure Mode, Effects and Criticality Analysis: WEC Risk Registers
Analysis method to systematically identify all potential failure modes and their effects on the Stingray WEC system. This analysis is incorporated early in the development cycle such that the mitigation of the identified failure modes can be achieved cost effectively and efficient...
Rhinefrank, K. Columbia Power Technologies, Inc.
Jul 25, 2016
18 Resources
Publicly accessible
18 Resources
Publicly accessible