Search OEDI Data

Utah FORGE Hydrothermal Friction-Hydraulic Transmissivity Laboratory Experiments

Submission includes data from laboratory slide-hold-slide tests, combined with flow through tests, conducted on Westerly granite with 30 degree sawcut. Tests were conducted with a constant confining pressure of 30 MPa with an average pore pressure of 10 MPa at temperatures of 23 a...

Jeppson, T. and Lockner, D. U.S. Geological Survey

Feb 24, 2022
1 Resources
0 Stars
Publicly accessible

Kinetics of Chlorite Dissolution at Elevated Temperatures and CO2 Conditions

Chlorite dissolution kinetics were measured under far from equilibrium conditions using a mixed-flow reactor over temperatures of 100-275 degrees C at pH values of 3.0-5.7 in a background solution matrix of 0.05 m NaCl. Over this temperature range, magnesium was released congruent...

Carroll, S. et al Lawrence Livermore National Laboratory

Jul 01, 2013
1 Resources
0 Stars
Publicly accessible

Operational Performance Requirements For Motor Power Sections Used in Geothermal Drilling Based Upon Minimum Specific Energy

Operational performance requirements are needed to support development of specifications for downhole motor power sections to be used for drilling hard rock during geothermal wellbore construction. Theoretical torque specifications are derived based upon a widely-accepted rock-re...

Raymond, D. Sandia National Laboratories

Sep 10, 2014
1 Resources
0 Stars
Publicly accessible

Slip and Dilation Tendency Analysis of the Patua Geothermal Area

Critically stressed fault segments have a relatively high likelihood of acting as fluid flow conduits (Sibson, 1994). As such, the tendency of a fault segment to slip or to dilate provides an indication of which faults or fault segments within a geothermal system are critically st...

E., J. University of Nevada

Dec 31, 2013
1 Resources
0 Stars
Publicly accessible

Drilling Monitoring Program: Computer Program on Heat Transfer Temperature Distribution Hydraulic Calculations for Abrasive Jet Drilling

A program was created to evaluate the downhole conditions occurring in a FLASH ASJ drilling system. the program is meant to aid the operator of a coiled tubing rig in maintaining optimum drilling conditions.

Ozbayoglu, E. Impact Technologies LLC

Jan 01, 2011
1 Resources
0 Stars
Publicly accessible

Stability of Elastomers Subjected to Geothermal Well-Like Conditions

The aim of this study is to understand how commercially available elastomers perform under geothermal well-like conditions and make recommendations to the community based on these results. This poster highlights the mechanical performance of several elastomers (including EPDM, Vit...

Redline, E. et al Sandia National Laboratories

Aug 10, 2014
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Data for 3-D Model Development Lithology, Temperature, Pressure, and Stress

This submission comprises two downloadable .zip archives. Each archive contains spreadsheets with 3-D data and a .txt document describing the data. The Mesh Files .zip download contains data regarding the lithologic contacts of the granitoid and overlying sedimentary basin fill. T...

Podgorney, R. Idaho National Laboratory

Mar 17, 2020
2 Resources
0 Stars
Publicly accessible

Magnetic Test Loop Particle Retention Data for REE Extraction from Geothermal Fluids

Measurements of particle extraction efficiency under various flow rate and magnetic power conditions

McGrail, P. and Liu, J. Pacific Northwest National Laboratory

Jul 27, 2018
2 Resources
0 Stars
Publicly accessible

Illite Dissolution Rates and Equation (100 to 280 deg C)

The objective of this suite of experiments was to develop a useful kinetic dissolution expression for illite applicable over an expanded range of solution pH and temperature conditions representative of subsurface conditions in natural and/or engineered geothermal reservoirs. Usi...

Carroll, S. Lawrence Livermore National Laboratory

Oct 17, 2014
1 Resources
0 Stars
Publicly accessible

Temperature and Pressure Data Brady Monitoring Well SP-2

Static Pressure and Temperature Log for Brady monitor well SP-2. This data was taken from Well SP-2 which is part of the Brady Hot Springs Geothermal Site. The data contains pressure and temperature vs depth data for RIH (run in hole) Static conditions and POOH (pull out of hole) ...

Akerley, J. University of Wisconsin

Jan 01, 2015
2 Resources
0 Stars
Publicly accessible

Development of a Neutron Diffraction Based Experimental Capability for Investigating Hydraulic Fractures for EGS-like Conditions

Understanding the relationship between stress state, strain state and fracture initiation and propagation is critical to the improvement of fracture simulation capability if it is to be used as a tool for guiding hydraulic fracturing operations. The development of fracture predict...

Polsky, Y. et al Oak Ridge National Laboratory

Feb 01, 2013
1 Resources
0 Stars
Publicly accessible

Utah FORGE 5-2615: Well 58-32 and 78-32 Poroelastic Properties

Lab data on permeability, grain bulk modulus, drained bulk modulus, Skempton's pore pressure coefficient, and Biot's effective stress coefficient for Utah Forge Well 58-32 and Well 78-32. Work done as part of project number 5-2615 by the University of Oklahoma.

Ghassemi, A. and Zhou, X. University of Oklahoma

Oct 31, 2022
2 Resources
0 Stars
Publicly accessible

Utah FORGE Core Material Friction Experiments

The following folders contain 3 friction experiments on Utah FORGE core material from depths of 6735 8533ft. The experiment conditions range from 100% relative humidity at room temperature to fluid-saturated at 110C. Experiments were done on both intact samples in a single-direct ...

Marone, C. et al The Pennsylvania State University

Mar 15, 2023
7 Resources
0 Stars
Publicly accessible

Shaker Table Experiments with Rare Earth Elements Sorption from Geothermal Brine

This dataset described shaker table experiments ran with sieved 50 +100 mesh media #1 in brine #1 that have 2ppm each of the 7 REE metals at different starting pH's of 3.5, 4.5, and 5.5. The experimental conditions are 2g media to 150mL of REE solution, at 70C.

Garland, G. Tusaar Corp.

Jul 21, 2015
4 Resources
0 Stars
Publicly accessible

Geomechanical Modeling for Thermal Spallation Drilling

Wells for Engineered Geothermal Systems (EGS) typically occur in conditions presenting significant challenges for conventional rotary and percussive drilling technologies: granitic rocks that reduce drilling speeds and cause substantial equipment wear. Thermal spallation drilling,...

Walsh, S. et al Lawrence Livermore National Laboratory

Aug 24, 2011
1 Resources
0 Stars
Publicly accessible

SGW paper Rheological Properties of Drilling Fluids Containing Special Additives for Geothermal Drilling Applications

The paper was presented at the 46th Workshop on Geothermal Reservoir Engineering, Stanford University, Stanford, California, February 15-17, 2021. In this study, the effectiveness of different additives was evaluated in maintaining drilling fluid rheology at HPHT(high pressure and...

Mohamed, A. et al University of Oklahoma

Jan 04, 2023
1 Resources
0 Stars
Publicly accessible

Chlorite Dissolution Rates From 25 to 275 degrees and pH 3 to 10

We have calculated a chlorite dissolution rate equation at far from equilibrium conditions by combining new data (20 experiments at high temperature) with previously published data Smith et al. 2013 and Lowson et al. 2007. All rate data (from the 127 experiments) are tabulated in...

Lawrence Livermore National Laboratory

Sep 27, 2013
2 Resources
0 Stars
Publicly accessible

Applications of Fractured Continuum Model to Enhanced Geothermal System Heat Extraction Problems

This paper describes the applications of the fractured continuum model to the different enhanced geothermal systems reservoir conditions. The capability of the fractured continuum model to generate fracture characteristics expected in enhanced geothermal systems reservoir environm...

Kalinina, E. et al Sandia National Laboratories

May 06, 2014
1 Resources
0 Stars
Publicly accessible

DTS Raw Data Guelph, Ontario Canada

Unprocessed active distributed temperature sensing (DTS) data from 3 boreholes in the Guelph, ON Canada region. Data from borehole 1 was collected during a fluid injection while data from boreholes 2 and 3 were collected under natural gradient conditions in a lined borehole. The...

Coleman, T. University of Wisconsin

Jul 31, 2013
5 Resources
0 Stars
Publicly accessible

Paisley Oregon Geothermal Plant Operated by Surprise Valley Electrification 2016 Operational Information

This submission includes an Electricity Generation Summary, Maintenance Logs, Detailed Operations Data, Operating Cost Summary, and an Operations overview at the Paisley Oregon Geothermal Plant. Data uploaded for SVEC by Tom Williams, NREL

Culp, E. Surprise Valley Electrification Corp. (SVEC)

Jan 01, 2017
5 Resources
0 Stars
Publicly accessible

Utah FORGE: Earth Model Native State Simulation Results

Utah FORGE phase 2C Native State Simulation zip contains the data used for the boundary conditions and subsequent native state simulation results obtained using the simulation code FALCON. Data are from the nodes of the simulation domain, with used a uniform 50m spacing over a 250...

Podgorney, R. Energy and Geoscience Institute at the University of Utah

Jul 16, 2019
2 Resources
0 Stars
Publicly accessible

Altered Rotokawa Andesite Thermal Treatment Petrophysics

Physical property data for transitory heating of altered Rotokawa andesite under saturated conditions at 20 MPa pressure. "M" samples are moderately altered, and "H" samples are highly altered. White-background columns depict pre-treatment data. Grey-background columns depict post...

Kennedy, B. National Renewable Energy Laboratory

Aug 20, 2019
1 Resources
0 Stars
In curation

SMP and Fracture Modeling

The problem of loss circulation in geothermal wells is inherently challenging due to high temperatures, brittle rocks, and presence of abundant fractures. Because of the inherent challenges in geothermal environments, there are limitations in selecting proper lost circulation mate...

Salehi, S. et al University of Oklahoma

Oct 01, 2021
4 Resources
0 Stars
Publicly accessible

SMP Preparation, Programming, and Characterization