Search OEDI Data

FOSWEC v2: System identification and control testing at Hinsdale Wave Research Laboratory

This report summarizes the design and execution of a wave tank test of the floating oscillating surge wave energy converter (FOSWEC) in the O.H. Hinsdale Wave Research Laboratory Directional Wave Basin at Oregon State University. This device, which uses two "flaps" that pivot abou...

Coe, R. et al Sandia National Laboratories

Feb 01, 2020
2 Resources
0 Stars
Publicly accessible

Laboratory Upgrade Point Absorber WEC-Sim Model with MoorDyn Moorings

This dataset includes a WEC-Sim and MoorDyn model of the Laboratory Upgrade Point Absorber (LUPA). LUPA is an open-source wave energy converter designed and tested by Oregon State University. The files provided here constitute a stable LUPA configuration with three mooring lines. ...

Mcconnell, A. Oregon State University

Oct 08, 2024
2 Resources
0 Stars
Publicly accessible

ALFA Oscillating Water Column Device Testing

Data from Phase 1 testing of a single ALFA Oscillating Water Column (OWC) device at the O.H. Hinsdale Wave Research Laboratory (HWRL) at Oregon State University in Fall of 2016. Contains two zip files of raw data, one of project data, and a diagram of the device with dimensions. ...

Bosma, B. Northwest National Marine Renewable Energy Center

Nov 07, 2016
4 Resources
0 Stars
Publicly accessible

Performance of Elevated Hinge Flap Wavemaker

This data includes a sweep of regular wave runs characterizing the performance of an elevated hinge flap wavemaker. Maximum wave heights were run for 13 periods in a range from 0.5 s to 6 s. Data is saved in several formats including 'raw' analog voltages, 'mat' matlab files,'tx...

Bosma, B. et al Pacific Marine Energy Center (PMEC)

Oct 25, 2023
2 Resources
0 Stars
Publicly accessible

National Marine Renewable Energy Center Upgrades LUPA

The data provided is part of a power take off damping optimization study. The power take off damping coefficient was swept from 0 to approximately 7000 N/m/s during a single regular wave test with a real time control of the motor/generator. The generated power from the LUPA (Lab U...

Robertson, B. et al Oregon State University

Oct 12, 2022
5 Resources
0 Stars
Publicly accessible

M3 Wave DMP/APEX WEC Laboratory Testing Content Model

Laboratory Testing for the Delos-Reyes Morrow Pressure Device (DMP), commercialized by M3 Wave LLC as "APEX." Content Model of 1:5 testing of thirteen different APEX I and APEX II configurations in the Hinsdale Long Wave Flume with a 0.5m deep sediment bed and under 4 different wa...

Morrow, M. and Delos-Reyes, M. M3 Wave

Sep 20, 2017
1 Resources
0 Stars
Publicly accessible

M3 Wave DMP/APEX WEC 1:10 Scale Preliminary Tank Test Plan

This is a preliminary test plan for testing of the Delos-Reyes Morrow Pressure Device (DMP), commercialized by M3 Wave LLC as "APEX," at Hinsdale Wave Research Laboratory at Oregon State University. Additional logistical details and instrumentation specifics will be added as engi...

Delos-Reyes, M. and Morrow, M. M3 Wave

Feb 23, 2017
1 Resources
0 Stars
Publicly accessible

Laboratory Upgrade Point Absorber (LUPA) CAD Files

The Laboratory Upgrade Point Absorber (LUPA) is an open-source wave energy converter designed and tested by Oregon State University. The computer-aided design (CAD) files are provided here in two forms: the original SOLIDWORKS (2021) model as "LUPA SOLIDWORKS.zip" and as a STEP fi...

Beringer, C. et al Oregon State University

Nov 04, 2024
7 Resources
0 Stars
Publicly accessible

Wave Energy Prize 1/50th Testing Principle Power Oscillating Water Column

This submission of data includes all the 1/50th scale testing data completed on the Wave Energy Prize for the Principle Power team, and includes: 1/50th test data (raw & processed) 1/50th test data video and pictures 1/50th Test plans and testing documents SSTF_Submission (sum...

Scharmen, W. Ricardo Detroit Technical Center

Jan 08, 2016
12 Resources
0 Stars
Publicly accessible

Experimental Testing of a Floating Oscillating Surge Wave Energy Converter at Hinsdale Wave Research Laboratory

In order to generate a public data set that can be used to validate Wave Energy Converter (WEC) numerical codes, such as WEC-Sim, Sandia National Laboratories led an experimental testing campaign of a 1:33 scale Floating Oscillating Surge Wave Energy Converter (FOSWEC) in the Dire...

Ruehl, K. et al Sandia National Laboratories

Jun 15, 2016
3 Resources
0 Stars
Publicly accessible

ALFA Non-linear Ocean Waves and PTO Control Strategy

Data from Advanced Laboratory and Field Arrays (ALFA) Non-linear Ocean Waves and Power Take-Off (PTO). Control Strategy project conducted at the O.H. Hinsdale Wave Research Laboratory (HWRL) at Oregon State University in 2019/2020. Contains two zip files (ALFANL.zip, ALFANL2.zip)...

Bosma, B. et al Pacific Marine Energy Center (PMEC)

Oct 28, 2019
9 Resources
0 Stars
Publicly accessible

Co-Design of Marine Energy Converters for Autonomous Underwater Vehicle Docking and Recharging Software and Data

Software and testing data from the OH Hinsdale Wave lab for DOE-funded project on Co-Design of Marine Energy Converters for Autonomous Underwater Vehicle Docking and Recharging. This project will perform foundational research and testing to accelerate the sector-wide development a...

Hollinger, G. et al Oregon State University

Oct 26, 2022
11 Resources
0 Stars
Publicly accessible

Wave Tank Testing of 1-DoF Heaving Buoy for Controls Validation Purposes

This submission includes the wave tank testing data used to validate the controls optimization efforts of a heaving 1-DoF buoy.

Previsic, M. et al Re Vision Consulting

Jul 13, 2017
4 Resources
0 Stars
Publicly accessible

WEC Controls Optimization Final Report

The over-arching project objective is to fully develop and validate optimal controls frameworks that can subsequently be applied widely to different WEC devices and concepts. Optimal controls of WEC devices represent a fundamental building block for WEC designers that must be cons...

Previsic, M. and Karthikeyan, A. Re Vision Consulting

Aug 26, 2020
1 Resources
0 Stars
Publicly accessible

Wave Tank Testing Report for Controls Validation of a Heaving Point Absorber

The core objectives of this project is to improve the power capture of three different wave energy conversion (WEC) devices by more than 50% using an advanced control system and validate the attained improvements using wave tank and full scale testing. In parallel, we will bring a...

Previsic, M. et al Re Vision Consulting

Aug 26, 2020
3 Resources
0 Stars
Publicly accessible

Washington Air-Sea Interaction Research Facility Waves and Currents Test Data

This archive includes data from the University of Washington WASIRF (Washington Air-Sea Interaction Research Facility) flume. WASIRF is a laboratory testing tank at the Northwest National Marine Renewable Energy Center designed to investigate wind-wave-current interactions. It inc...

Colosimo, P. University of Washington (NNMREC) Applied Physics Lab

Feb 23, 2022
1 Resources
0 Stars
Publicly accessible

Newberry EGS Literature References

Research references to literature about the Newberry geothermal area, Oregon.

Rose, K. National Energy Technology Laboratory

Apr 22, 2016
1 Resources
0 Stars
Publicly accessible

EGS Collab: 3D Geophysical Model Around the Sanford Underground Research Facility

This package contains data associated with a proceedings paper (linked below) submitted to the 44th Workshop on Geothermal Reservoir Engineering. The Geophysical Model text file contains density, P and S-wave seismic speeds on a 3D grid. The file has six columns and provides latit...

Chai, C. et al Lawrence Berkeley National Laboratory

Feb 06, 2019
3 Resources
0 Stars
Publicly accessible

Reference Model 6 Full Scale Geometry (RM6: Oscillating Water Column)

Contains the Reference Model 6 (RM6) full scale geometry files of the Oscillating Water Column, developed by the Reference Model Project (RMP). These full scale geometry files are saved as SolidWorks assembly, IGS, and STEP files, and require a CAD program to view. This data was g...

Neary, V. et al Sandia National Laboratories

Sep 30, 2014
4 Resources
0 Stars
Publicly accessible

University of Miami Coupled Model (UMCM) for Hurricanes Ike and Sandy

The University of Miami Coupled Model (UMCM) is a coupled model that integrates atmospheric, wave, and ocean components to produce wind, wave, and current data. Atmospheric data is produced using the [Weather Research and Forecasting model](https://www.mmm.ucar.edu/weather-researc...

Phillipes, C. et al National Renewable Energy Laboratory

Sep 30, 2015
5 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 2: 4100 Foot Level Elastic Property Data

Static and dynamic elastic properties (Young's modulus, Shear Modulus, P-wave Modulus, and Poisson's Ratio) of amphibolites and rhyolites from the TV4100 and TH4100 boreholes at the Sanford Underground Research Laboratory (SURF). Elastic properties include Young's modulus, Poisson...

Jahnke, B. et al Lawrence Berkeley National Laboratory

Dec 18, 2020
4 Resources
0 Stars
Publicly accessible

MBARI WEC 2021 deployment

This dataset includes data from the Monterey Bay Aquarium Research Institute (MBARI) wave energy converter (WEC) and a nearby located Sofar Spotter buoy. The Monterey Bay Aquarium Research Institute has developed and deployed a small two-body point absorber wave energy device suit...

Coe, R. et al Sandia National Laboratories

Oct 12, 2021
4 Resources
0 Stars
Publicly accessible

TEAMER: AquaHarmonics High Fidelity WEC Sim PTO and Control Model Validation, Sim Model

Collaborative effort between AquaHarmonics, Sandia National Laboratories (SNL), and the National Renewable Energy Laboratory (NREL) to revise and validate Aquaharmonics' full wave to wire model, allowing for reduced uncertainty and increased understanding of design requirements of...

Tom, N. and Leon, J. AquaHarmonics, Inc.

Dec 31, 2021
6 Resources
0 Stars
Publicly accessible

Analysis of a fixed-bottom cylinder in a wave basin

**Overview** The Offshore Code Comparison, Collaboration, Continued, with Correlation (OC5) is an international research project run under the International Energy Agency (IEA) Wind Task 30. The project is focused on validating the tools used design offshore wind systems. OC5 con...

Robertson, A. Wind Energy Technologies Office (WETO)

Jul 22, 2019
1 Resources
0 Stars
Publicly accessible

Analysis of a suspended cylinder in a wave basin