Search OEDI Data

Microwave Radiometer ESRL Radiometrics MWR, Troutdale Raw Data

**Overview** These data monitor real-time profiles of temperature (K), water vapor (gm-3), relative humidity (%), and liquid water (gm-3) up to 10 km. **Data Details** All output files are named automatically using the following format: yyyy-mm-dd_hh-mm-ss_xxx.csv, where yyyy...

Bianco, L. Wind Energy Technologies Office (WETO)

Nov 18, 2015
1 Resources
0 Stars
Publicly accessible

Microwave Radiometer ESRL Radiometrics MWR, Troutdale Reviewed Data

**Overview** These data monitor real-time profiles of temperature (K), water vapor (gm-3), relative humidity (%), and liquid water (gm-3) up to 10 km. **Data Details** All output files are named automatically using the following format: yyyy-mm-dd_hh-mm-ss_xxx.csv, where yyyy...

Bianco, L. Wind Energy Technologies Office (WETO)

Nov 18, 2015
1 Resources
0 Stars
Publicly accessible

Microwave Radiometer ESRL Radiometrics MWR, Wasco Airport Raw Data

**Overview** These data monitor real-time profiles of temperature (K), water vapor (gm-3), relative humidity (%), and liquid water (gm-3) up to 10 km. **Data Details** All output files are named automatically using the following format: yyyy-mm-dd_hh-mm-ss_xxx.csv, where yyyy...

Bianco, L. Wind Energy Technologies Office (WETO)

Nov 18, 2015
1 Resources
0 Stars
Publicly accessible

Microwave Radiometer ESRL Radiometrics MWR, Wasco Airport Reviewed Data

**Overview** These data monitor real-time profiles of temperature (K), water vapor (gm-3), relative humidity (%), and liquid water (gm-3) up to 10 km. **Data Details** All output files are named automatically using the following format: yyyy-mm-dd_hh-mm-ss_xxx.csv, where yyyy...

Bianco, L. Wind Energy Technologies Office (WETO)

Nov 18, 2015
1 Resources
0 Stars
Publicly accessible

Microwave Radiometer UND Radiometrics MWR, Rufus Raw Data

**Overview** These data monitor real-time profiles of temperature (K), water vapor (gm-3), relative humidity (%), and liquid water (gm-3) up to 10 km. **Data Details** All output files are named automatically using the following format: yyyy-mm-dd_hh-mm-ss_xxx.csv, where yyyy...

Bianco, L. Wind Energy Technologies Office (WETO)

Nov 18, 2015
1 Resources
0 Stars
Publicly accessible

UAE6 Wind Tunnel Tests Data UAE6 Sequence 6 Raw Data

**Overview** Sequence 6: Shroud Wake Measure (P) This test sequence used a downwind, rigid turbine with a 3.4° cone angle. The wind speeds for this sequence corresponded to subcritical [7 m/s], transitional [15 m/s], and supercritical [20 m/s] Reynolds number regimes for the ci...

Fingersh, L. Wind Energy Technologies Office (WETO)

Nov 28, 2018
1 Resources
0 Stars
Publicly accessible

Lidar HilFlowS LLNL ZephIR300 MOP Processed Data

**Overview** The ZephIR300 is a continuous wave LIDAR with a range of 10 m to 300 m. During HilFlowS the ZephIR300 was programmed to measure from 10 m to 150 m. In addition, the ZephIR300 provided a measurement at 1 m height using an onboard meteorological sensor. The ZephIR300 ...

Wharton, S. and , . Wind Energy Technologies Office (WETO)

Jul 07, 2019
1 Resources
0 Stars
Publicly accessible

Lidar HilFlowS LLNL ZephIR300 WOP Processed Data

**Overview** The ZephIR300 is a continuous wave LIDAR with a range of 10 m to 300 m. During HilFlowS the ZephIR300 was programmed to measure from 10 m to 150 m. In addition, the ZephIR300 provided a measurement at 1 m height using an onboard meteorological sensor. The ZephIR300 ...

Wharton, S. and , . Wind Energy Technologies Office (WETO)

Jul 07, 2019
1 Resources
0 Stars
Publicly accessible

wfip2.model/retro.hrrr.01.fcst.01

**Overview** The primary purpose of WFIP2 Model Development Team is to improve existing numerical weather prediction models in a manner that leads to improved wind forecasts in regions of complex terrain. Improvements in the models will come through better understanding of the ph...

Macduff, M. Wind Energy Technologies Office (WETO)

Feb 09, 2016
1 Resources
0 Stars
Publicly accessible

wfip2.model/retro.hrrr.01.fcst.02

**Overview** The primary purpose of WFIP2 Model Development Team is to improve existing numerical weather prediction models in a manner that leads to improved wind forecasts in regions of complex terrain. Improvements in the models will come through better understanding of the ph...

Macduff, M. Wind Energy Technologies Office (WETO)

Feb 09, 2016
1 Resources
0 Stars
Publicly accessible

wfip2.model/retro.hrrr.02.fcst.01

**Overview** The primary purpose of WFIP2 Model Development Team is to improve existing numerical weather prediction models in a manner that leads to improved wind forecasts in regions of complex terrain. Improvements in the models will come through better understanding of the ph...

Macduff, M. Wind Energy Technologies Office (WETO)

Feb 09, 2016
1 Resources
0 Stars
Publicly accessible

wfip2.model/retro.hrrr.02.fcst.02

**Overview** The primary purpose of WFIP2 Model Development Team is to improve existing numerical weather prediction models in a manner that leads to improved wind forecasts in regions of complex terrain. Improvements in the models will come through better understanding of the ph...

Macduff, M. Wind Energy Technologies Office (WETO)

Feb 09, 2016
1 Resources
0 Stars
Publicly accessible

wfip2.model/retro.rap.01.fcst.01

**Overview** The primary purpose of WFIP2 Model Development Team is to improve existing numerical weather prediction models in a manner that leads to improved wind forecasts in regions of complex terrain. Improvements in the models will come through better understanding of the ph...

Macduff, M. Wind Energy Technologies Office (WETO)

Feb 09, 2016
1 Resources
0 Stars
Publicly accessible

wfip2.model/retro.rap.02.fcst.01

**Overview** The primary purpose of WFIP2 Model Development Team is to improve existing numerical weather prediction models in a manner that leads to improved wind forecasts in regions of complex terrain. Improvements in the models will come through better understanding of the ph...

Macduff, M. Wind Energy Technologies Office (WETO)

Feb 09, 2016
1 Resources
0 Stars
Publicly accessible

UAE6 Wind Tunnel Tests Data UAE6 Sequence 7 Raw Data

**Overview** Sequence 7: Shroud Operating (P) This test sequence used a downwind, rigid turbine with a 3.4° cone angle. The wind speed ranged from 5 m/s to 25 m/s. Turntable angles from 0° to 30° were achieved, but the yaw error angle was maintained at 0° by adjusting the na...

Fingersh, L. Wind Energy Technologies Office (WETO)

Nov 28, 2018
1 Resources
0 Stars
Publicly accessible

Surface Meteorological Station HilFlowS LLNL 52m tall tower EOP Processed Data

**Overview** The WindCube v2 was co-located with Site 300’s 52-m-tall meteorological tower so that measurements below 40 m could also be observed. The meteorological tower has three measurement levels: 10 m, 23 m, and 52 m. Wind speed was measured with a cup anemometer; wind di...

Wharton, S. and , . Wind Energy Technologies Office (WETO)

Jul 07, 2019
1 Resources
0 Stars
Publicly accessible

UAE6 Wind Tunnel Tests Data UAE6 Sequence N Raw Data

**Overview** Sequence N: Sin AOA, Rotating (P) This sequence was designed to quantify the blade 3-D unsteady aerodynamic response in the presence of rotational influences by varying blade pitch angle. Test sequence N used an upwind, rigid turbine with a 0° cone angle. The wind ...

Fingersh, L. Wind Energy Technologies Office (WETO)

Nov 28, 2018
1 Resources
0 Stars
Publicly accessible

UAE6 Wind Tunnel Tests Data UAE6 Sequence K Raw Data

**Overview** Sequence K: Step AOA, Probes (P) This sequence was designed to quantify the 3-D blade static angle-of-attack response in the presence of rotational influences by varying the blade pitch angle. Sequence K used an upwind, rigid turbine with a 0° cone angle. The wind ...

Fingersh, L. Wind Energy Technologies Office (WETO)

Nov 27, 2018
1 Resources
0 Stars
Publicly accessible

UAE6 Wind Tunnel Tests Data UAE6 Sequence L Raw Data

**Overview** Sequence L: Step AOA, Parked (P) This sequence was designed to quantify the 3-D blade static angle-of-attack response in the absence of rotational influences by varying the blade pitch angle. This test sequence used an upwind, rigid turbine with a 0° cone angle. Wi...

Fingersh, L. Wind Energy Technologies Office (WETO)

Nov 28, 2018
1 Resources
0 Stars
Publicly accessible

UAE6 Wind Tunnel Tests Data UAE6 Sequence O Raw Data

**Overview** Sequence O: Sin AOA, Parked (P) This sequence was designed to quantify the blade 3-D unsteady aerodynamic response in the absence of rotational influences by varying blade pitch angle. This test sequence used an upwind, rigid turbine with a 0° cone angle. The wind ...

Fingersh, L. Wind Energy Technologies Office (WETO)

Nov 28, 2018
1 Resources
0 Stars
Publicly accessible

wfip2.model/realtime.hrrr_esrl.graphics.01

**Overview** The primary purpose of WFIP2 Model Development Team is to improve existing numerical weather prediction models in a manner that leads to improved wind forecasts in regions of complex terrain. Improvements in the models will come through better understanding of the ph...

Macduff, M. Wind Energy Technologies Office (WETO)

Dec 14, 2015
1 Resources
0 Stars
Publicly accessible

wfip2.model/realtime.hrrr_esrl.icbc.01

**Overview** The primary purpose of WFIP2 Model Development Team is to improve existing numerical weather prediction models in a manner that leads to improved wind forecasts in regions of complex terrain. Improvements in the models will come through better understanding of the ph...

Macduff, M. Wind Energy Technologies Office (WETO)

Dec 01, 2015
1 Resources
0 Stars
Publicly accessible

wfip2.model/realtime.hrrr_wfip2.graphics.02

**Overview** The primary purpose of WFIP2 Model Development Team is to improve existing numerical weather prediction models in a manner that leads to improved wind forecasts in regions of complex terrain. Improvements in the models will come through better understanding of the ph...

Macduff, M. Wind Energy Technologies Office (WETO)

Dec 16, 2015
1 Resources
0 Stars
Publicly accessible

wfip2.model/realtime.hrrr_wfip2.icbc.02

**Overview** The primary purpose of WFIP2 Model Development Team is to improve existing numerical weather prediction models in a manner that leads to improved wind forecasts in regions of complex terrain. Improvements in the models will come through better understanding of the ph...

Macduff, M. Wind Energy Technologies Office (WETO)

Dec 01, 2015
1 Resources
0 Stars
Publicly accessible

wfip2.model/realtime.rap_esrl.icbc.01

**Overview** The primary purpose of WFIP2 Model Development Team is to improve existing numerical weather prediction models in a manner that leads to improved wind forecasts in regions of complex terrain. Improvements in the models will come through better understanding of the ph...

Macduff, M. Wind Energy Technologies Office (WETO)

Nov 19, 2015
1 Resources
0 Stars
Publicly accessible

<< Previous 1 2 3 4 Next >>