Search OEDI Data

Showing results 51 - 75 of 741.
Show results per page.
Order by:
Available Now:
Clear All Filters ×
Research Areas
Accessibility
Data Type
Organization
Source
"Ocean Renewable Power Company"×
National Renewable Energy Laboratory×

Ocean Thermal Energy Conversion (OTEC) Grid points with annual averages (HYCOM+NCODA)

This point shapefile contains the HYCOM+NCODA point locations used in the report. These grid points contain the annual average attribute values for ocean thermal energy conversion used in the report and analysis. Please see the full report for details on the data (chapter 2) and ...
Langle, N. and Laboratory, N. National Renewable Energy Laboratory
Nov 25, 2014
2 Resources
0 Stars
In curation

Evaluation of the Performance of Houses With and Without Supplemental Dehumidification in a Hot-Humid Climate

Understanding indoor humidity conditions in low energy homes in hot-humid climates is critical to promoting long term occupant comfort, indoor air quality and building durability. The results of this study were expected to inform the residential building community on whether suppl...
Kerrigan, P. and Norton, P. National Renewable Energy Laboratory
Apr 27, 2016
7 Resources
0 Stars
Publicly accessible

Ocean Thermal Energy Conversion (OTEC) Plant Spacing Estimates

This shapefile represents estimated plant spacing distances. The estimates shown here were obtained considering the availability of cold water at a particular location based on two criteria, the deep-water velocities from HYCOM and a layer-depth constraint estimated from the gl...
Langle, N. and Laboratory, N. National Renewable Energy Laboratory
Nov 25, 2014
2 Resources
0 Stars
In curation

Ocean Thermal Energy Conversion (OTEC) Sea Surface Temperature (Annual Average)

This shapefile represents annual average sea surface temperature recordings. The sea surface temperature is the temperature of the warm water source used by an OTEC plant. This is defined to be near the sea surface at a depth of 20 m, the approximate depth of a warm water intak...
Langle, N. and Laboratory, N. National Renewable Energy Laboratory
Nov 25, 2014
2 Resources
0 Stars
In curation

Ocean Thermal Energy Conversion (OTEC) Sea Surface Temperature (Summer Average)

This shapefile represents seasonal summer average sea surface temperature recordings. The sea surface temperature is the temperature of the warm water source used by an OTEC plant. This is defined to be near the sea surface at a depth of 20 m, the approximate depth of a warm wa...
Langle, N. and Laboratory, N. National Renewable Energy Laboratory
Nov 25, 2014
2 Resources
0 Stars
In curation

Ocean Thermal Energy Conversion (OTEC) Sea Surface Temperature (Winter Average)

This shapefile represents seasonal winter average sea surface temperature recordings. The sea surface temperature is the temperature of the warm water source used by an OTEC plant. This is defined to be near the sea surface at a depth of 20 m, the approximate depth of a warm wa...
Langle, N. and Laboratory, N. National Renewable Energy Laboratory
Nov 25, 2014
2 Resources
0 Stars
In curation

Detailed Renewable Energy Resource Assessment Data Inventory (US)

Detailed inventory of available renewable energy (RE) resource assessment data. Although the type, amount, and regional distribution of resource information vary by resource, assessments are available for each RE category (conducted by
Hallett, K. and Laboratory, N. National Renewable Energy Laboratory
Nov 25, 2014
2 Resources
0 Stars
In curation

Ocean Thermal Energy Conversion (OTEC) | Seawater Cooling Depth Profile 14ºC (Annual Average)

This shapefile represents the annual average depth profile to reach water at a temperature of 14ºC. Sea water cooling can be used for industrial or residential cooling needs where heat must be rejected. A typical resource for direct air-conditioning applications is no warmer t...
Langle, N. and Laboratory, N. National Renewable Energy Laboratory
Nov 25, 2014
2 Resources
0 Stars
In curation

Ocean Thermal Energy Conversion (OTEC) | Seawater Cooling Depth Profile 14ºC (Summer Average)

This shapefile represents the seasonal summer depth profile to reach water at a temperature of 14ºC. Sea water cooling can be used for industrial or residential cooling needs where heat must be rejected. A typical resource for direct air-conditioning applications is no warmer ...
Langle, N. and Laboratory, N. National Renewable Energy Laboratory
Nov 25, 2014
2 Resources
0 Stars
In curation

Ocean Thermal Energy Conversion (OTEC) | Seawater Cooling Depth Profile 14ºC (Winter Average)

This shapefile represents the seasonal winter depth profile to reach water at a temperature of 14ºC. Sea water cooling can be used for industrial or residential cooling needs where heat must be rejected. A typical resource for direct air-conditioning applications is no warmer ...
Langle, N. and Laboratory, N. National Renewable Energy Laboratory
Nov 25, 2014
2 Resources
0 Stars
In curation

Ocean Thermal Energy Conversion (OTEC) | Seawater Cooling Depth Profile 20ºC (Annual Average)

This shapefile represents the annual average depth profile to reach water at a temperature of 20ºC. Sea water cooling can be used for industrial or residential cooling needs where heat must be rejected. A typical resource for direct air-conditioning applications is no warmer t...
Langle, N. and Laboratory, N. National Renewable Energy Laboratory
Nov 25, 2014
2 Resources
0 Stars
In curation

Ocean Thermal Energy Conversion (OTEC) | Seawater Cooling Depth Profile 20ºC (Summer Average)

This shapefile represents the seasonal summer depth profile to reach water at a temperature of 20ºC. Sea water cooling can be used for industrial or residential cooling needs where heat must be rejected. A typical resource for direct air-conditioning applications is no warmer ...
Langle, N. and Laboratory, N. National Renewable Energy Laboratory
Nov 25, 2014
2 Resources
0 Stars
In curation

Ocean Thermal Energy Conversion (OTEC) | Seawater Cooling Depth Profile 20ºC (Winter Average)

This shapefile represents the seasonal winter depth profile to reach water at a temperature of 20ºC. Sea water cooling can be used for industrial or residential cooling needs where heat must be rejected. A typical resource for direct air-conditioning applications is no warmer ...
Langle, N. and Laboratory, N. National Renewable Energy Laboratory
Nov 25, 2014
2 Resources
0 Stars
In curation

Ocean Thermal Energy Conversion (OTEC) | Seawater Cooling Depth Profile 8ºC (Annual Average)

This shapefile represents the annual average depth profile to reach water at a temperature of 8ºC. Sea water cooling can be used for industrial or residential cooling needs where heat must be rejected. A typical resource for direct air-conditioning applications is no warmer th...
Langle, N. and Laboratory, N. National Renewable Energy Laboratory
Nov 25, 2014
2 Resources
0 Stars
In curation

Ocean Thermal Energy Conversion (OTEC) | Seawater Cooling Depth Profile 8ºC (Summer Average)

This shapefile represents the seasonal summer depth profile to reach water at a temperature of 8ºC. Sea water cooling can be used for industrial or residential cooling needs where heat must be rejected. A typical resource for direct air-conditioning applications is no warmer t...
Langle, N. and Laboratory, N. National Renewable Energy Laboratory
Nov 25, 2014
2 Resources
0 Stars
In curation

Ocean Thermal Energy Conversion (OTEC) | Seawater Cooling Depth Profile 8ºC (Winter Average)

This shapefile represents the seasonal winter depth profile to reach water at a temperature of 8ºC. Sea water cooling can be used for industrial or residential cooling needs where heat must be rejected. A typical resource for direct air-conditioning applications is no warmer t...
Langle, N. and Laboratory, N. National Renewable Energy Laboratory
Nov 25, 2014
2 Resources
0 Stars
In curation

Early Market Opportunity MHK Energy Site Identification Wave and Tidal Resources

This data was compiled for the 'Early Market Opportunity Hot Spot Identification' project. The data and scripts included were used in the 'MHK Energy Site Identification and Ranking Methodology' Reports (see resources below). The Python scripts will generate a set of results--base...
Kilcher, L. National Renewable Energy Laboratory
Apr 01, 2016
7 Resources
0 Stars
Publicly accessible

HERO WEC Belt Test Data

The following submission includes raw and processed data from the 2024 Hydraulic and Electric Reverse Osmosis Wave Energy Converter (HERO WEC) belt tests conducted using NREL's Large Amplitude Motion Platform (LAMP). A description of the motion profiles run during testing can be f...
Jenne, S. et al National Renewable Energy Laboratory
Sep 01, 2024
7 Resources
0 Stars
Publicly accessible

HERO WEC V1 Upgrade 2023 Laboratory Testing (Raw Data)

This submission contains the original, unprocessed data from the 2023 Large Amplitude Motion Platform (LAMP) testing of NREL's Hydraulic and Electric Reverse Osmosis Wave Energy Converter (HERO WEC). This data serves as a companion to MHKDR #520. Data was collected using NREL's Mo...
Jenne, S. et al National Renewable Energy Laboratory
Jan 01, 2024
6 Resources
0 Stars
Publicly accessible

Estimated Proved and Unproved Oil and Gas Reserves, Gulf of Mexico: 2006

The US Department of Interior's (DOI) Bureau of Ocean Energy Management, Regulation and Enforcement (BOEMRE) publishes oil and gas reserve data corresponding to the report published in 2009 by the DOI entitled, "Outer Continental Shelf Estimated Oil and Gas Reserves Gulf of Mexico...
Hallett, K. and (BOEMRE), U. National Renewable Energy Laboratory
Nov 30, 2009
5 Resources
0 Stars
In curation

Most Likely Extreme Response Analysis of an Ellipsoid Float Wave Energy Converter

Input data and heave results (unsteady RANS-VOF overset simulations performed in Star-CCM+) for a float with an ellipsoid geometry. Five extreme sea states were considered, as detailed in the conference paper "Application of the Most Likely Extreme Response Method for Wave Energy ...
Quon, E. National Renewable Energy Laboratory
Jun 17, 2016
7 Resources
0 Stars
Publicly accessible

U.S. Offshore Oil and Gas Operations Reports (1996 2010)

The US Department of Interior's (DOI) Bureau of Ocean Energy Management, Regulation and Enforcement (BOEMRE) publishes data from the Oil and Gas Operations Reports (OGOR) for the Gulf of Mexico OCS Region. The datasets include: annual well production (OGOR-A), lease disposition (O...
Hallett, K. and (BOEMRE), U. National Renewable Energy Laboratory
Dec 15, 2010
7 Resources
0 Stars
In curation

U.S. Offshore Pipeline Information and Data

The US Department of Interior's (DOI) Bureau of Ocean Energy Management, Regulation and Enforcement (BOEMRE) publishes pipeline data for the Gulf of Mexico OCS Region. The data includes information specific to each pipeline segment number, such as: origination and destination loca...
Hallett, K. and (BOEMRE), U. National Renewable Energy Laboratory
Jan 02, 2011
6 Resources
0 Stars
In curation

Admiralty Inlet Hub-Height Turbulence Measurements from June 2012

This data is from measurements at Admiralty Head, in Admiralty Inlet. The measurements were made using an IMU equipped ADV mounted on a mooring, the 'Tidal Turbulence Mooring' or 'TTM'. The inertial measurements from the IMU allows for removal of mooring motion in post processing....
Kilcher, L. National Renewable Energy Laboratory
Jun 18, 2012
7 Resources
0 Stars
Publicly accessible

HERO WEC 2024 Hydraulic Configuration Deployment Data

The following submission includes raw and processed data from the in water deployment of NREL's Hydraulic and Electric Reverse Osmosis Wave Energy Converter (HERO WEC), in the form of parquet files, TDMS files, CSV files, bag files and MATLAB workspaces. This dataset was collected...
Jenne, S. et al National Renewable Energy Laboratory
Mar 14, 2024
9 Resources
0 Stars
Publicly accessible
<< Previous1234567Next >>