Search OEDI Data

Pilgrim Hot Springs Building Dimensions and Energy Modeling

This dataset was created to model the anticipated heating load of a geothermal project in development for the historical site of Pilgrim Hot Springs, and adds to the history of geothermal studies at the site. Models include an historical building (Nun's Quarters), existing modern ...

Garber-Slaght, R. and Coakley, M. National Renewable Energy Laboratory (NREL)

Feb 28, 2024
2 Resources
0 Stars
Curated

Advanced Control Systems for Wave Energy Converters

This submission contains several papers, a final report, descriptions of a theoretical framework for two types of control systems, and descriptions of eight real-time flap load control policies with the objective of assessing the potential improvement of annual average capture eff...

Scruggs, J. et al Resolute Marine Energy, Inc.

Jan 30, 2017
4 Resources
0 Stars
Publicly accessible

Utah FORGE: Optimization of a Plug-and-Perf Stimulation (Fervo Energy)

Information around the plug-and-perf treatment design at Utah FORGE by Fervo Energy. Objective and Purpose: Develop a multistage hydraulic stimulation approach designed specifically to target the top three factors that control the technical and commercial viability of an EGS sys...

Norbeck, J. et al Fervo Energy

Feb 08, 2023
3 Resources
0 Stars
Publicly accessible

Fallon FORGE: LiDAR Acquisition and Processing Report

The data is associated to the Fallon FORGE project and includes LiDAR from the Navy GPO. Also included are geologic maps from the USGS and Nevada Bureau of Mines and Geology for the Fallon, NV area.

Bucher, K. et al Sandia National Laboratories

May 23, 2016
2 Resources
0 Stars
Publicly accessible

Compatibility Study of Nanofiltration and Reverse Osmosis Membranes with 1 Cyclohexylpiperidenium Bicarbonate Solutions

The switchable polarity solvent forward osmosis (SPS FO) desalination process requires use of a polishing filtration step to remove trace quantities of draw solution from the product water stream. Selected nanofiltration (NF) and reverse osmosis (RO) membranes were tested for thei...

Adhikari, B. et al Idaho National Laboratory

Oct 01, 2015
2 Resources
0 Stars
Publicly accessible

Comparative Analysis of Alternative Means for Removing Noncondensable Gases from Flashed-Steam Geothermal Power Plants:April 1999 March 2000

This dataset corresponds to the final report on a screening study to compare six methods of removing noncondensable gases from direct-use geo-thermal steam power plants. This report defines the study methodologies and compares the performance and economics of selected gas-removal ...

Hallett, K. and Laboratory, N. National Renewable Energy Laboratory

Nov 25, 2014
3 Resources
0 Stars
In curation

Utah FORGE: 3D Gravity Data

These resources describe the 3D geophysical inversion modeling of gravity data at the FORGE site near Milford, Utah. FORGE is the Frontier Observatory for Research in Geothermal Energy and the site in Utah has been selected by the U.S. Dept. of Energy for a 5-year R&D program to t...

Hardwick, C. and Witter, J. Energy and Geoscience Institute at the University of Utah

Jun 24, 2019
2 Resources
0 Stars
Publicly accessible

Funding Mechanisms for Federal Geothermal Permitting

This submission includes a presentation and paper for the Geothermal Resources Council (GRC) that discuss: Federal agency revenues received for geothermal projects, including: (1) lease revenues, (2) fixed fees, and (3) cost recovery fees for the Bureau of Land Management (BLM) a...

Young, K. et al National Renewable Energy Laboratory

Sep 30, 2013
2 Resources
0 Stars
Publicly accessible

Indoor and Outdoor Temperature data

We have used three LM35 temperature sensors to sense indoor and outdoor temperature at Bangkok University , Thailand. Two sensors (Sensor A and B)were placed in a air-conditioned room in the Engineering Building (6th Floor) and kept once sensor outside (Sensor C)

Maduranga, P. National Renewable Energy Laboratory

Jan 21, 2018
1 Resources
0 Stars
In curation

Literature Data on Foam Fracturing Fluid

At the beginning of this project, the Temple team spent significant effort to collect data relevant to foam fracturing. More than 40 articles/reports were found in the open literature that reported the properties of aqueous foams under various testing conditions. The foam properti...

Thakor, V. et al Temple University

Nov 08, 2021
2 Resources
0 Stars
Publicly accessible

Utah FORGE Development of a Reservoir Seismic Velocity Model and Seismic Resolution Study

This is data from and a final report on the development of a 3D velocity model for the larger FORGE area and on the seismic resolution in the stimulated fracture volume at the bottom of well 16A-32. The velocity model was developed using RMS velocities of the seismic reflection su...

Vasco, D. and Chan, C. Array Information Technology

Apr 30, 2022
2 Resources
0 Stars
Publicly accessible

Dixie Valley Engineered Geothermal System Exploration Methodology Project, Baseline Conceptual Model Report

The Engineered Geothermal System (EGS) Exploration Methodology Project is developing an exploration approach for EGS through the integration of geoscientific data. The Project chose the Dixie Valley Geothermal System in Nevada as a field laboratory site for methodlogy calibration...

Iovenitti, J. AltaRock Energy Inc

May 15, 2013
2 Resources
0 Stars
Publicly accessible

Utah FORGE Induced Seismicity Mitigation Plan

This is the current induced seismicity mitigation plan (ISMP) for the Utah FORGE project. Information that was collected during Phases 1 and 2 of the Utah FORGE project has been incorporated, as have literature searches and risk assessments. The purpose of this report is to identi...

Utah, U. et al Energy and Geoscience Institute at the University of Utah

Dec 30, 2020
2 Resources
0 Stars
Publicly accessible

Mass Customization of Prefabricated Panel Blocks for Deep Wall Insulation Retrofits

The project this data comes from looks to make building wall retrofits less expensive and easier to install by using exterior insulating panels. This is done to make buildings more energy efficient without expensive wall retrofits or reconstruction. The "Measurement and Verificati...

Sharon, A. et al Fraunhofer Center for Manufacturing Innovation CMI

Dec 14, 2021
2 Resources
0 Stars
Publicly accessible

Brookfield Homes Passive House Performance Evaluation

TO4 3.1.3: Brookfield Homes Short-Term Results TO5 3.1.3: Brookfield Passive House Monitoring To further define its market position on high performance homebuilding, Brookfield worked with IBACOS and the Building America program to design and construct a Passive House (PH) certif...

Beach, R. et al Ibacos Innovation

Apr 27, 2016
4 Resources
0 Stars
Publicly accessible

Recovery of Rare Earths, Precious Metals and Other Critical Materials from Geothermal Waters with Advanced Sorbent Structures

The work evaluates, develops and demonstrates flexible, scalable mineral extraction technology for geothermal brines based upon solid phase sorbent materials with a specific focus upon rare earth elements (REEs). The selected organic and inorganic sorbent materials demonstrated h...

Addleman, R. et al Pacific Northwest National Laboratory

Sep 30, 2015
2 Resources
0 Stars
Publicly accessible

Multifamily Programmable Thermostat Data

This data set, compiled by the Fraunhofer Center for Sustainable Energy Systems, includes long-term 10-minute temperature and relative humidity data, and HVAC system state data for 79 apartments in a low-income housing complex in Revere, MA. The monitoring period spans two winters...

Urban, B. et al Fraunhofer USA

Jul 27, 2015
2 Resources
0 Stars
Publicly accessible

RANS Simulation RRF of Single Full Scale DOE RM1 MHK Turbine

Attached are the .cas and .dat files for the Reynolds Averaged Navier-Stokes (RANS) simulation of a single full scale DOE RM1 turbine implemented in ANSYS FLUENT CFD-package. In this case study taking advantage of the symmetry of the DOE RM1 geometry, only half of the geometry i...

Javaherchi, T. et al University of Washington

Apr 10, 2013
2 Resources
0 Stars
Publicly accessible

Tidal Energy Site Characterization East Forelands Alaska

During the summer field season in 2012, Benthic GeoScience Inc. (Benthic) mobilized under contract with Ocean Renewable Power Company (ORPC) in order to conduct precise geospatial measurements of the seafloor accomplishing a preliminary Site Characterization Study for the ORPC Eas...

Worthington, M. National Renewable Energy Laboratory

Apr 01, 2013
2 Resources
0 Stars
Publicly accessible

The Foundational Industry Energy Dataset: Unit-level Characterization and Derived Energy Estimates for Industrial Facilities in 2017

The Foundational Industry Energy Dataset (FIED) addresses several of the areas of growing disconnect between the demands of industrial energy analysis and the state of industrial energy data by providing unit-level characterization by facility. Each facility is identified by a uni...

McMillan, C. et al National Renewable Energy Laboratory (NREL)

Jul 01, 2024
4 Resources
0 Stars
Curated

SMP Preparation, Programming, and Characterization

The problem of loss circulation in geothermal wells is inherently challenging due to high temperatures, brittle rocks, and presence of abundant fractures. Because of the inherent challenges in geothermal environments, there are limitations in selecting proper lost circulation mate...

Salehi, S. et al University of Oklahoma

Oct 01, 2021
4 Resources
0 Stars
Publicly accessible

Reference Model 6 Full Scale Geometry (RM6: Oscillating Water Column)

Contains the Reference Model 6 (RM6) full scale geometry files of the Oscillating Water Column, developed by the Reference Model Project (RMP). These full scale geometry files are saved as SolidWorks assembly, IGS, and STEP files, and require a CAD program to view. This data was g...

Neary, V. et al Sandia National Laboratories

Sep 30, 2014
4 Resources
0 Stars
Publicly accessible

Advancing Replicable Solutions for High-Performance Homes in the Southeast JMC Patrick Square

The work presented in this report advances the goals of the U.S. Department of Energy Building America program by improving the energy peformance of affordable and market-rate housing. Southface Energy Institute (Southface), part of the U.S. Department of Energy Building America r...

Sweet, M. et al Southface

Apr 27, 2016
3 Resources
0 Stars
Publicly accessible

Commercial Reference Building: Midrise Apartment

Commercial reference buildings provide complete descriptions for whole building energy analysis using EnergyPlus (see "About EnergyPlus" resource link) simulation software. Included here is data pertaining to the reference building type "Midrise Apartment" for each of the 16 clima...

Deru, M. et al National Renewable Energy Laboratory

Nov 25, 2014
7 Resources
0 Stars
In curation

Commercial Reference Building: Primary School