Search OEDI Data

EGS Collab Experiment 1: Baseline Cross-well Seismic

As part of the geophysical characterization suite for the first EGS Collab tesbed, here are the baseline cross-well seismic data and resultant models. The campaign seismic data have been organized, concatenated with geometry and compressional (P-) & and shear (S-) wave picks, and ...

Schwering, P. et al Sandia National Laboratories

Apr 30, 2018
9 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 3 Magnetotelluric (MT) Data

New high-quality tensor MT data at 122 sites, including the vertical magnetic field and utilizing ultra-remote referencing, have been acquired over the Utah FORGE project area. The results will be used to delineate the densities of faults and fractures in crystalline basement rock...

Wannamaker, P. and Maris, V. Energy and Geoscience Institute at the University of Utah

Oct 01, 2020
5 Resources
0 Stars
Publicly accessible

Utah FORGE 2-2439v2: Report on Predicting Far-Field Stresses Using Finite Element Modeling and Near-Wellbore Machine Learning for Well 16A(78)-32

This report presents the far-field stress predictions at two locations along the vertical section of Utah FORGE Well 16A (78)-32 using a physics-based thermo-poro-mechanical model. Three principal stresses in far-field were obtained by solving an inverse problem based on the near-...

Lu, G. et al University of Pittsburgh

Aug 30, 2024
2 Resources
0 Stars
Publicly accessible

Fallon FORGE: Seismic Reflection Profiles

Newly reprocessed Naval Air Station Fallon (1994) seismic lines: pre-stack depth migrations, with interpretations to support the Fallon FORGE (Phase 2B) 3D Geologic model. Data along seven profiles (>100 km of total profile length) through and adjacent to the Fallon site were re-...

Blankenship, D. et al Sandia National Laboratories

Feb 01, 2018
3 Resources
0 Stars
Publicly accessible

Utah FORGE: 2023 Large Upscaled Discrete Fracture Network Models

This dataset includes the data and a report on the large upscaled discrete fracture network modeling done for the Utah FORGE project in 2023. The FORGE modeling team is making five discrete fracture network (DFN) realizations of a large reservoir model available to researchers. Th...

Finnila, A. Energy and Geoscience Institute at the University of Utah

Oct 02, 2023
17 Resources
0 Stars
Publicly accessible

SMP and Fracture Modeling

The problem of loss circulation in geothermal wells is inherently challenging due to high temperatures, brittle rocks, and presence of abundant fractures. Because of the inherent challenges in geothermal environments, there are limitations in selecting proper lost circulation mate...

Salehi, S. et al University of Oklahoma

Oct 01, 2021
4 Resources
0 Stars
Publicly accessible

2014 Wind Turbine Gearbox Damage Distribution based on the NREL Gearbox Reliability Database

Despite the improvements in wind turbine gearbox design and manufacturing practices, the wind industry is still challenged by premature wind turbine gearbox failures. To help address this industry-wide challenge, a consortium called the Gearbox Reliability Collaborative (GRC) was ...

Sheng, S. National Renewable Energy Laboratory

Feb 09, 2015
1 Resources
0 Stars
In curation

Magnetotelluric Data Collected in 2016 over the San Emidio Geothermal Field in Nevada

This data set includes the magnetotelluric (MT) data collected from October 21 to November 9, 2016 over the San Emidio geothermal field in Nevada by Quantec Geoscience USA Inc. on behalf of US Geothermal Inc. as part of a project entitled "A Novel Approach to Map Permeability Usi...

Folsom, M. et al Ormat Technologies, Inc.

Nov 09, 2016
11 Resources
0 Stars
Publicly accessible

Reactive Transport Modeling of Aquifer Thermal Energy Storage System at Stockton, NJ

This is the modeling data (input/output files of TOUGHREACT 4.10) used to simulate the reactive transport processes of the Aquifer Thermal Energy Storage (ATES) operations at Stockton University, NJ. Readme.txt lists all the files. TOUGHREACT 4.10 requires to reproduce the modelin...

Kumar, R. et al Lawrence Berkeley National Laboratory

Oct 20, 2021
4 Resources
0 Stars
Publicly accessible

Snake River Plain Play Fairway Analysis: Phase 1 Report

This presents the results of Phase 1 of the Snake River Plain Play Fairway Analysis project, along with a proposed work for Phase 2. No new data were collected, but we list data sources for our compilation. The Snake River volcanic province (SRP) overlies a thermal anomaly that e...

Shervais, J. et al Utah State University

Jan 25, 2016
1 Resources
0 Stars
Publicly accessible

Final Report Cascades/Aleutians Play Fairway Project

Final Report describing data collection, evaluation, modeling and analysis. Ranking of Cascade and Aleutian volcanic centers for geothermal potential.

Shevenell, L. et al ATLAS Geosciences Inc

Oct 31, 2015
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Seismic Reflection Data

This is 2D and 3D seismic reflection data from Utah FORGE reprocessed during Phase 2c. The readme file containing an explanation of the data including data formats, software that can be used, processing, and projection and datum used. The Reprocessing document gives the rationale ...

Miller, J. Energy and Geoscience Institute at the University of Utah

Jun 19, 2019
4 Resources
0 Stars
Publicly accessible

City and County Commercial Building Inventories

The Commercial Building Inventories provide modeled data on commercial building type, vintage, and area for each U.S. city and county. Please note this data is modeled and more precise data may be available through county assessors or other sources. Commercial building stock data ...

Day, M. et al National Renewable Energy Laboratory

Apr 01, 2020
9 Resources
1 Stars
Publicly accessible

Utah FORGE 2-2439v2: Reports on Stress Prediction and Modeling for Well 16B(78)-32 May 2025

These two reports from the University of Pittsburgh document related efforts under Utah FORGE Project 2-2439v2 to estimate in-situ stresses in well 16B(78)-32 using laboratory data, machine learning models, and physics-based simulations. One report focuses on developing and valida...

Lu, G. et al University of Pittsburgh

Jun 05, 2025
2 Resources
0 Stars
Publicly accessible

Material Properties for Brady Hot Springs Nevada USA from PoroTomo Project

The PoroTomo team has completed inverse modeling of the three data sets (seismology, geodesy, and hydrology) individually, as described previously. The estimated values of the material properties are registered on a three-dimensional grid with a spacing of 25 meters between nodes....

Feigl, K. and PoroTomo Team, . University of Wisconsin

Mar 06, 2019
10 Resources
0 Stars
Publicly accessible

Newberry EGS Demonstration: Initial Project Report and Induced Seismicity Mitigation Plan, 2011

This is the first project report and induced seismicity mitigation plan for the Newberry Enhanced Geothermal Systems (EGS) Demonstration project. The primary objectives of this first phase were to obtain necessary permits and comply with all regulations, including NEPA, communica...

Cladouhos, T. et al AltaRock Energy Inc

May 05, 2024
4 Resources
0 Stars
Publicly accessible

Utah FORGE 2-2446: Report on Phase Field Modelling of Near-Wellbore Hydraulic Fracture Nucleation and Propagation

This is a report that describes the modelling of fracture nucleation and propagation in the near-wellbore region to understand the relationship between in situ stress and fracture patterns. A novel phase field formulation is described here, which represents fractures as a diffuse ...

Cusini, M. and Fei, F. Lawrence Livermore National Laboratory

Dec 31, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Well Data for Student Competition

Well 58-32 (previously labeled MU-ESW1) was drilled near Milford Utah during Phase 2B of the FORGE Project to confirm geothermal reservoir characteristics met requirements for the final FORGE site. Well Accord-1 was drilled decades ago for geothermal exploration purposes. While ...

Podgorney, R. et al Idaho National Laboratory

Dec 07, 2018
12 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Building a 3D Resistivity Model for Simulation and Survey Design of EM Measurements

The included report outlines the creation of three 3D resistivity models that will be used to determine the sensitivity of EM measurements for the hypothetical stimulated reservoir at FORGE as well as for EM survey design. FORGE project 3-2535 is planning on using a casing source ...

Alumbaugh, D. et al Lawrence Berkeley National Laboratory

Dec 01, 2022
5 Resources
0 Stars
Publicly accessible

Q1 2023 U.S. Solar Photovoltaic System and Energy Storage Cost Benchmarks With Minimum Sustainable Price Analysis Data File

The U.S. Department of Energy's (DOE's) Solar Energy Technologies Office (SETO) aims to accelerate the advancement and deployment of solar technology in support of an equitable transition to a decarbonized economy no later than 2050, starting with a decarbonized power sector by 20...

Ramasamy. . et al National Renewable Energy Laboratory

Sep 25, 2023
4 Resources
0 Stars
Publicly accessible

CIRES Approach Overview to Using Thermal Infrared Imagery to Find Geothermal Systems in Colorado

Subsurface geothermal activity has a thermal expression that can be observed at the surface. Such spatial temperature gradients are within the radiometric resolution that is characteristic of a wide range of satellites that carry thermal sensors. For this effort, CIRES (part of ...

Hussein, K. Flint Geothermal, LLC

Feb 01, 2012
1 Resources
0 Stars
Publicly accessible

Community-Scale Attic Retrofit and Home Energy Upgrade Data Mining Hot Dry Climate

Retrofitting is an essential element of any comprehensive strategy for improving residential energy efficiency. The residential retrofit market is still developing, and program managers must develop innovative strategies to increase uptake and promote economies of scale. Residenti...

Jackson, J. et al Davis Energy

Apr 27, 2016
46 Resources
0 Stars
Publicly accessible

CO2 Push-Pull Single Fault Injection Simulations

ASCII text files containing grid-block name, X-Y-Z location, and multiple parameters from TOUGH2 simulation output of CO2 injection into an idealized single fault representing a dipping normal fault at the Desert Peak geothermal field (readable by GMS). The fault is composed of a ...

Borgia, A. et al Lawrence Berkeley National Laboratory

Sep 21, 2017
5 Resources
0 Stars
Publicly accessible

DEEPEN: Newberry Volcano MT and Gravity Data 2022 and 2023 Acquisition and Processing

As part of DEEPEN (DE-risking Exploration of geothermal Plays in magmatic ENvironments), a 3D play fairway analysis (PFA) was conducted at Newberry Volcano in Central Oregon for multiple play types (conventional hydrothermal, superhot EGS, and supercritical). For use in this PFA, ...

Shultz, A. et al Enthalpion Energy

Jun 30, 2023
8 Resources
0 Stars
Publicly accessible

Unified Field Study 2 (UFS-2)

The Unified Field Studies (UFS), established by the Algae Testbed Public-Private Partnership (ATP3), produced data on the effect of environmental and process conditions on algal growth rates and algal composition. The goal of the second Unified Field Study (UFS-2), performed April...

Wolfrum, E. et al National Renewable Energy Laboratory

Sep 27, 2016
18 Resources
0 Stars
Publicly accessible

<< Previous 3 4 5 6 7 8 9 10 11 12 Next >>