Search OEDI Data

Showing results 226 - 250 of 710.
Show results per page.
Order by:
Available Now:
Clear All Filters ×
Research Areas
Accessibility
Data Type
Organization
Source
"Bureau of Land Management"×
Archive×

3D Model of the Neal Hot Springs Geothermal Area

The Neal Hot Springs geothermal system lies in a left-step in a north-striking, west-dipping normal fault system, consisting of the Neal Fault to the south and the Sugarloaf Butte Fault to the north (Edwards, 2013). The Neal Hot Springs 3D geologic model consists of 104 faults and...
E., J. University of Nevada
Dec 31, 2013
1 Resources
0 Stars
Publicly accessible

US Low-Temperature EGS Resource Potential Estimate

Shapefile of shallow, low-temperature EGS resources for the United States, and accompanying paper (submitted to GRC 2016) describing the methodology and analysis. These data are part of a very rough estimate created for use in the U.S. Department of Energy Geothermal Technology O...
Mullane, M. et al National Renewable Energy Laboratory
Jun 30, 2016
2 Resources
0 Stars
Publicly accessible

Strengthening Effects of Surface Chemistry on the Consolidation of Silicate-Based Geomaterials Experimental Data

Experimental data for manuscript "Strengthening Effects of Surface Chemistry on the Consolidation of Silicate-Based Geomaterials" by R. C. Choens, J. Wilson, and A. G. Ilgen; Sandia National Laboratories. The data includes scanning electron microscope images along with experimenta...
Choens, R. et al Sandia National Laboratories
Jun 21, 2024
5 Resources
0 Stars
In curation

Economic Impact of Permitting Timelines on Produced Geothermal Power

Despite having a large geothermal power potential in the United States, only a small fraction has been developed for power generation. Various barriers, including technical, financial, and regulatory permit delays, are attributed to lower contribution of geothermal energy in the n...
Neupane, G. and Adhikari, B. Idaho National Laboratory
Feb 15, 2022
3 Resources
0 Stars
Publicly accessible

Utah FORGE: Temperature Contours at 200 m

The individual shapefiles in this dataset delineate estimated temperature contours (20, 40, 60, and 80 deg C) at a depth of 200 m in the Milford, Utah FORGE area. Contours were derived from 86 geothermal, gradient, and other wells drilled in the area since the mid-1970s with dept...
Moore, J. Energy and Geoscience Institute at the University of Utah
Feb 01, 2016
7 Resources
0 Stars
Publicly accessible

NREL GIS Data: U.S. Atlantic Coast Offshore Windspeed 90m Height High Resolution

This dataset is a geographic shapefile generated from the original raster data. The original raster data resolution is a 200-meter cell size. The data provide an estimate of annual average wind speed at 90 meter height above surface for specific offshore regions of the United Stat...
Wood, J. and Laboratory, N. National Renewable Energy Laboratory
Nov 25, 2014
2 Resources
0 Stars
In curation

Reference Model 4 Full Scale Geometry (RM4: Ocean Current Turbine)

Contains the Reference Model 4 (RM4) full scale geometry files of the Ocean Current Turbine, developed by the Reference Model Project (RMP). These full scale geometry files are saved as SolidWorks assembly, IGS, X_T, and STEP files, and require a CAD program to view. This data was...
Neary, V. et al Sandia National Laboratories
Sep 30, 2014
5 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 2C Topical Report

This is the topical report that wraps up the work and results achieved during Utah FORGE Phase 2C. The zip file includes several folders containing (1) an overview; (2) the results; (3) the lessons learned; and (4) the conclusions. It also contains a folder containing appendices i...
Moore, J. et al Energy and Geoscience Institute at the University of Utah
Dec 11, 2019
2 Resources
0 Stars
Publicly accessible

NREL Wave Energy Assessment for the United States and Puerto Rico

This dataset estimates the naturally available and technically recoverable U.S. wave energy resources, using a 51-month Wavewatch III hindcast database developed especially for this study by National Oceanographic and Atmospheric Administration's (NOAA's) National Centers for Envi...
Langle, N. and Laboratory, N. National Renewable Energy Laboratory
Nov 25, 2014
9 Resources
0 Stars
In curation

Tidal Currents in San Juan Archipelago, Washington

Re-analyzed acoustic Doppler current profiler (ADCP) data originally collected by NOAA CO-OPS (Center for Operational Oceanographic Products and Services) and equivalent point data from Pacific Northwest National Laboratory's FVCOM (Finite Volume Community Ocean Model) model of th...
Polagye, B. et al University of Washington
Dec 15, 2022
3 Resources
0 Stars
Publicly accessible

Utah FORGE: 3D Gravity Data

These resources describe the 3D geophysical inversion modeling of gravity data at the FORGE site near Milford, Utah. FORGE is the Frontier Observatory for Research in Geothermal Energy and the site in Utah has been selected by the U.S. Dept. of Energy for a 5-year R&D program to t...
Hardwick, C. and Witter, J. Energy and Geoscience Institute at the University of Utah
Jun 24, 2019
2 Resources
0 Stars
Publicly accessible

Design of high-deflection foils MHK applications CFD models Helical turbines

The Ocean Renewable Power Company's (ORPC's) goal is to design, develop, and test hydrofoils with large deflections. The effects of the deflections on cross-flow turbine performance would be evaluated in order to inform design considerations for full-scale water turbines and other...
Barrington, M. and McEntee, J. Ocean Renewable Power Company
Nov 01, 2021
2 Resources
0 Stars
Publicly accessible

Alaska's Coal Resources: Special Report SR 37 (1986)

This GIS data contains the location of coal resources within the Sate of Alaska and was created in cooperation with the Alaska Coal Association. Total hypothetical coal resources in Alaska exceed 5.5 trillion short tons, equal to about half the estimated coal resources of the Unit...
Hallett, K. and (AEDI), A. National Renewable Energy Laboratory
Nov 29, 2007
2 Resources
0 Stars
In curation

NREL GIS Data: Arizona High Resolution Wind Resource

_Abstract:_ Annual average wind resource potential for the state of Arizona at a 50 meter height. This dataset will be replaced when the southwest region has been completed, and the data may change when this region has been completed. _Purpose:_ Provide information on the win...
Wood, J. and Laboratory, N. National Renewable Energy Laboratory
Nov 25, 2014
2 Resources
0 Stars
In curation

NREL GIS Data: Arkansas High Resolution Wind Resource

_Abstract:_ Annual average wind resource potential for the state of Arkansas at a 50 meter height. _Purpose:_ Provide information on the wind resource development potential within the state of Arkansas. _Supplemental Information:_ This data set has been validated by NREL ...
Wood, J. and Laboratory, N. National Renewable Energy Laboratory
Nov 25, 2014
2 Resources
0 Stars
In curation

Utah FORGE: Soil Carbon Dioxide Data

These are data from soil CO2 flux surveys done in the Utah FORGE study area near Roosevelt Hot Springs. Concentration is in units of ppm and is the final concentration of CO2 in the chamber after the up-to-2-minute flux measurement. Flux is in units of grams of CO2 per m^2.
Rahilly, K. Energy and Geoscience Institute at the University of Utah
Mar 12, 2018
1 Resources
0 Stars
Publicly accessible

Reference Model 2 Scaled Geometry (RM2: River Current Turbine)

Contains the Reference Model 2 (RM2) scaled scale geometry files of the River Current Turbine, developed by the Reference Model Project (RMP). These scaled geometry files are saved as SolidWorks assembly, IGS, and STEP files, and require a CAD program to view. The scaled RM2 devic...
Neary, V. and Hill, C. Sandia National Laboratories
Sep 30, 2014
5 Resources
0 Stars
Publicly accessible

Foam Fracturing Fluid Half-life Experimental Data

Foam thermal stability was studies at Temple University in collaboration with Oak Ridge National Lab (ORNL). The goal of this project is to explore thermally stable foams as hydrofracking fluid media for potential applications in enhanced geothermal system (EGS). Data generated fr...
Thakor, V. et al Temple University
May 20, 2022
1 Resources
0 Stars
Publicly accessible

Reference Model 1 Full Scale Geometry (RM1: Tidal Current Turbine)

Contains the Reference Model 1 (RM1) full scale geometry files of the Tidal Current Turbine, developed by the Reference Model Project (RMP). These full scale geometry files are saved as SolidWorks assembly, X_T, IGS, and STEP files, and require a CAD program to view. This data was...
Neary, V. et al Sandia National Laboratories
Sep 30, 2014
7 Resources
0 Stars
Publicly accessible

Slip and Dilation Tendency Analysis of the Tuscarora Geothermal Area

Critically stressed fault segments have a relatively high likelihood of acting as fluid flow conduits (Sibson, 1994). As such, the tendency of a fault segment to slip (slip tendency; Ts; Morris et al., 1996) or to dilate (dilation tendency; Td; Ferrill et al., 1999) provides an in...
E., J. University of Nevada
Dec 31, 2013
1 Resources
0 Stars
Publicly accessible

NREL GIS Data: Hawaii Low Resolution Wind Resource

Annual average wind resource potential of Hawaii (low resolution) ### License Info DISCLAIMER NOTICE This GIS data was developed by the National Renewable Energy Laboratory (NREL), which is operated by the Alliance for Sustainable Energy, LLC for the U.S. Department of Ener...
Langle, N. and Laboratory, N. National Renewable Energy Laboratory
Nov 25, 2014
2 Resources
0 Stars
In curation

Deep Direct-Use Feasibility Study Tuscarora Sandstone Geophysical Log Digitization

This dataset contains well log files collected from wells penetrating the Tuscarora Sandstone, structural geologic map of West Virginia and salinity information based on brine geochemistry in West Virginia and Pennsylvania. A combination of proprietary and free software may be re...
Moore, J. West Virginia University
Dec 18, 2019
6 Resources
0 Stars
Publicly accessible

Deep Direct-Use Feasibility Study Economic Analysis using GEOPHIRES for West Virginia University

This dataset contains all the inputs used and output produced from the modified GEOPHIRES for the economic analysis of base case hybrid GDHC system, improved hybrid GDHC system with heat pump and for hot water GDHC. Software required: Microsoft Notepad, Microsoft Excel and GEOPHI...
Garapati, N. West Virginia University
Jan 09, 2020
8 Resources
0 Stars
Publicly accessible

Geologic Map and GIS Data for the Wabuska Geothermal Area

Wabuska-ESRI geodatabase (ArcGeology v1.3): Contains all the geologic map data, including faults, contacts, folds, veins, dikes, unit polygons, and attitudes of strata. List of stratigraphic units and stratigraphic correlation diagram. One cross-section.
Hinz, N. University of Nevada
Sep 30, 2013
1 Resources
0 Stars
Publicly accessible

Slip and Dilation Tendency Analysis of the San Emidio Geothermal Area

Critically stressed fault segments have a relatively high likelihood of acting as fluid flow conduits (Sibson, 1994). As such, the tendency of a fault segment to slip (slip tendency; Ts; Morris et al., 1996) or to dilate (dilation tendency; Td; Ferrill et al., 1999) provides an in...
E., J. University of Nevada
Dec 31, 2013
1 Resources
0 Stars
Publicly accessible
<< Previous567891011121314Next >>