Search OEDI Data

Utah FORGE: Pump and Probe Test on an Intact Westerly Granite Sample

This dataset contains results from a pump and probe experiment conducted on an intact Westerly Granite sample with a diameter of 1 inch and a height of 1 3/8 inches. The experiment was performed within an aluminum triaxial pressure vessel (TEMCO) to investigate the non-linear acou...

Klinghammer, H. et al Pennsylvania State University

May 21, 2024
4 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 58-32 Stimulation Data

Pressure, temperature, and flow data from open-hole, upper perforation, and lower perforation well stimulations gathered from various tools collected at well 58-32 during phase 2C.

Best, S. Geothermal Resource Group

Apr 20, 2019
16 Resources
0 Stars
Publicly accessible

Fallon, NV FORGE well 21-31 Lithology, Mineral, Image Log, and Injection Test data

Attached is 5 datasets collected from Fallon FORGE well 21-31 located in Churchill County, Nevada collected and interpreted between Feburary 2018-January 2020. This submission includes 1) new lithology interpretation derived from petrographic thin sections of sidewall cores taken ...

Kraal, K. and Ayling, B. Sandia National Laboratories

May 30, 2020
5 Resources
0 Stars
Publicly accessible

West Flank Coso, CA Magnetic and Gravity Data

Gravity and aeromagnetic data for West Flank FORGE site.

Katzenstein, A. et al Sandia National Laboratories

May 19, 2016
1 Resources
0 Stars
Publicly accessible

Altona, NY EGS Field Site Radon Study

Data include 222Rn activities and complimentary geochemical data for multiple field experiments as part of an EGS project

Brown, S. and Christensen, J. Lawrence Berkeley National Laboratory

Sep 02, 2016
3 Resources
0 Stars
Publicly accessible

EGS Collab: Modeling and Simulation Working Group Teleconference Series (99-128)

This submission contains the presentation slides and recordings from EGS Collab Modeling and Simulation Working Group (MSWG) teleconferences number 99 through 128. These teleconferences served three objectives for the project: 1) share simulation results, 2) communicate field acti...

White, M. et al Pacific Northwest National Laboratory

Jun 07, 2022
31 Resources
0 Stars
Publicly accessible

Utah FORGE: Fault Shear Reactivation Experimental Data for Fluid Injection-Rate Controls on Seismic Moment

Included are experimental data recorded from shear experiments that specifically explore the link between fluid-injection rate and seismic moment resulting from shear reactivation of laboratory faults. Raw mechanical data from three experiments are included alongside corresponding...

Roseboom, M. et al Pennsylvania State University

Nov 07, 2023
6 Resources
0 Stars
Publicly accessible

Utah FORGE: Chemical-Based Tool Deployment Data for Inflow Detection at Wells 58-32 and 16B(78)-32 Summer 2024 Circulation Test

This dataset comprises field logging data collected during chemical-based tool deployments at the Utah FORGE geothermal site, specifically at monitoring well 58-32 and production well 16B(78)-32. Data acquisition occurred during the Summer 2024 circulation testing campaign, with t...

Sausan, S. et al Stanford University

Mar 31, 2025
12 Resources
0 Stars
Publicly accessible

Caldwell Ranch Exploration and Confirmation Project, Northwest Geysers, CA: 2011 Geothermal Technologies Peer Review Project Summary

Caldwell Ranch Exploration and Confirmation Project, Northwest Geysers, CA: 2011 Geothermal Technologies Peer Review Project Summary The Caldwell Ranch Exploration and Confirmation Project was to drill, test, and confirm the present economic viability of the undeveloped geothermal...

Walters, M. Geysers Power Company, LLC

Jan 01, 2011
1 Resources
0 Stars
Publicly accessible

Fiber Optic Thermal Slug Experiments Conducted at Texas Tech University Report

The report details a thermal circulation test at Red Raider #2 at the Oil Field Technology Center (OTC) involving staged hot water injections and distributed temperature sensing (DTS) fiber optic measurements. It includes experimental setup, fluid flow and temperature data, therm...

Leggett, S. Texas Tech University

Apr 11, 2025
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Slide-Hold-Slide Experiments on Gneiss at Increased Temperature

Included are data from triaxial, single-inclined-fracture friction experiments. The experiments were performed with slide-hold-slide protocol on Utah FORGE gneiss at increased temperature. With a ~10 MPa normal stress, temperatures vary between experiments from room temperature u...

Eijsink, A. and Elsworth, D. Pennsylvania State University

Jul 25, 2023
24 Resources
0 Stars
Publicly accessible

Air Leakage and Air Transfer Between Garage and Living Space

This research project focused on evaluation of air transfer between the garage and living space in a single-family detached home constructed by a production homebuilder in compliance with the 2009 International Residential Code and the 2009 International Energy Conservation Code. ...

Rudd, A. and Kerrigan, P. Advanced Building Systems

Apr 27, 2016
2 Resources
0 Stars
Publicly accessible

ALFA Discrete Element Method (DEM) Simulations using PFC3D

Contains input scripts, background information, reduced data, and results associated with the discrete element method (DEM) simulations of interface shear tests, plate anchor pullout tests, and torpedo anchor installation and pullout tests, using the software PFC3D (v4.0).

Evans, M. Northwest National Marine Renewable Energy Center

Jan 05, 2016
3 Resources
0 Stars
Publicly accessible

EGS Collab: Modeling and Simulation Working Group Teleconference Series (129-130)

This submission contains the presentation slides and recordings from EGS Collab Modeling and Simulation Working Group (MSWG) teleconferences number 129 through 130. These teleconferences served three objectives for the project: 1) share simulation results, 2) communicate field act...

White, M. et al Pacific Northwest National Laboratory

Jun 22, 2022
3 Resources
0 Stars
Publicly accessible

Gearbox Reliability Collaborative Phase 3 Gearbox 3 Test

The GRC uses a combined gearbox testing, modeling, and analysis approach disseminating data and results to the industry and facilitating improvement of gearbox reliability. This test data describes the tests of GRC gearbox 3 in the National Wind Technology Center dynamometer and d...

Keller and WallenNational Renewable Energy Laboratory

Dec 21, 2016
18 Resources
0 Stars
Publicly accessible

Confined Brazilian Tests for Rock Failure Envelope and Behavior

Includes test data from Confined Brazilian Tests. The tests were aim at investigating the rock failure envelope of four different lithologies including Indiana limestone, Scioto sandstone, Grey Berea sandstone, and Tennessee sandstone. Tables include the strength data obtained usi...

Ghassemi, A. and Li, Y. University of Oklahoma

Aug 31, 2021
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Discrete Fracture Network (DFN) Data

The FORGE team is making these fracture models available to researchers wanting a set of natural fractures in the FORGE reservoir for use in their own modeling work. They have been used to predict stimulation distances during hydraulic stimulation at the open toe section of well 1...

Finnila, A. and Podgorney, R. Golder Associates Inc.

Jun 24, 2020
66 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: Microseismic Monitoring

The U.S. Department of Energy's Enhanced Geothermal System (EGS) Collab project aims to improve our understanding of hydraulic stimulations in crystalline rock for enhanced geothermal energy production through execution of intensely monitored meso-scale experiments. The first expe...

Schoenball, M. et al Lawrence Berkeley National Laboratory

Jul 29, 2019
46 Resources
0 Stars
Publicly accessible

Distributed Acoustic Sensing (DAS) Data for Periodic Hydraulic Tests: Hydraulic Data

Hydraulic responses from periodic hydraulic tests conducted at the Mirror Lake Fractured Rock Research Site, during the summer of 2015. These hydraulic responses were measured also using distributed acoustic sensing (DAS) which is cataloged in a different submission under this gr...

Cole, M. California State University

Jul 31, 2015
6 Resources
0 Stars
Publicly accessible

Water chemistry data and calculations for Fracture Sustainability Tests

Measured cation, anion, and silica are presented as well as calculations evaluating mass balance performed for 4 fracture sustainability tests under EGS conditions: Stripa granite, Metamudstone, Rhyolitic Ashflow Tuff, and Silicified Rhyolitic Tuff. Calculations of charge balance ...

Kneafsey, T. et al Lawrence Berkeley National Laboratory

Sep 30, 2020
2 Resources
0 Stars
Publicly accessible

CalWave Device Behavior in Different Sea States from Scaled Tank Testing

This submission contains a summary of tank test derived WEC device behavior in different irregular sea states. CalWave sought to conduct experimental tank testing of scaled prototype units early on in the design process to obtain a first estimation of device performance for sea ...

Boerner, T. and Murray, B. CalWave Power Technologies Inc.

Mar 30, 2018
1 Resources
0 Stars
Publicly accessible

Distributed Acoustic Sensing (DAS) for Periodic Hydraulic Tests: Laboratory Data

These data were collected in the laboratory located at California State University Long Beach. They consist of DAS data collected from a fiber optic cable placed in a tank of water, subjected to oscillating head. These tests are described in the article linked below.

Coleman, T. California State University

Feb 27, 2015
5 Resources
0 Stars
Publicly accessible

Summary of Cement Formulations Tested by BNL for Self-Healing Ability Tests Conditions and Data

A table of cement formulations tested by Brookhaven National Laboratory in 2016-2017 in the frame of the "Self-healing and Re-Adhering Cements with Improved Toughness at Casing and Formation Interfaces for Geothermal Wells" project.

Sugama, T. Brookhaven National Laboratory

Sep 27, 2017
2 Resources
0 Stars
Publicly accessible

CalWave Open Water Demonstration PTO Belt Assessment & Test Report Public

PTO (Power Take-Off) belt test and analysis report conducted under CalWave's Open Water Demonstration Award EE0008097 Belt Tradeoffs for Winch PTO. The report tests two types of belts: a high modulus polyethylene (HMPE) woven fiber belt and a steel cable polyurethane belt. The goa...

Kojimoto, N. and Boerner, T. CalWave Power Technologies Inc.

May 28, 2021
1 Resources
0 Stars
Publicly accessible

Lost Circulation Materials in Geothermal Drilling: Thermal Degradation, Viscosity, Compression, and Flow Loop Tests

This dataset provides a set of experimental data on the performance of lost circulation materials (LCMs) used in geothermal drilling operations. It includes results from four distinct tests: thermal degradation, viscosity measurements, compression tests, and high-temperature flow ...

Kibikas, W. et al Sandia National Laboratories

Feb 01, 2022
9 Resources
0 Stars
Publicly accessible

<< Previous 7 8 9 10 11 12 13 14 15 16 Next >>