Search OEDI Data

Showing results 1 - 25 of 207.
Show results per page.
Order by:
Available Now:
Clear All Filters ×
Research Areas
Accessibility
Data Type
Organization
Source
"test procedures"×
Geothermal Data Repository (GDR)×

Utah FORGE: Wells 16A(78)-32 and 16B(78)-32 Extended Circulation Test Data August and September 2024

The dataset includes data collected during an extended circulation test conducted at the Utah FORGE site between August 8 and September 5, 2024. It provides uncorrected, raw digital data from the test, along with calibration information and a final report detailing the test proced...
McLennan, J. et al Energy and Geoscience Institute at the University of Utah
Oct 11, 2024
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Injection and Production Test results and Reports from August 2024

This dataset includes results and reports from the injection/production test for wells 16A(78)-32 and 16B(78)-32 in August, 2024 at Utah FORGE. Materials include injection, post stimulation production, flow rate, gamma, temperature and pressure survey results. For the respective ...
Kolomytsev, L. and Chadwick, C. Energy and Geoscience Institute at the University of Utah
Sep 24, 2024
2 Resources
0 Stars
Publicly accessible

Community Geothermal: Thermal Conductivity Test and Data Analysis Report Wallingford, CT

Report on a formation thermal conductivity test that was performed on the geothermal test bore at Ulbrich Heights at 38 Louis Circle Lane in Wallingford, Connecticut. Data are applicable only within the Wallingford region and should not be extrapolated for other climatic and geogr...
Martin, C. Connecticut Department of Energy and Environmental Protection (CT DEEP)
Feb 20, 2024
1 Resources
0 Stars
Publicly accessible

Oilwell Conversion (Well API 121913310501) to Geothermal Heat Storage Well for Flexible Electricity Storage

Geothermal growth is limited by a lack of geographically dispersed high-temperature thermal resources and high initial upfront investment in characterization and well construction. This project intended to address the challenges of energy supply intermittency and enhance grid resi...
Malkewicz, N. et al University of Illinois
May 05, 2021
8 Resources
0 Stars
Publicly accessible

Utah FORGE: LBNL Status Report on the VEMP Tool 2024

This report describes the modifications made to the Vertical Electromagnetic Profiling (VEMP) borehole tool, currently on loan to Lawrence Berkeley National Laboratory (LBNL) from Japan's Geothermal Energy Research and Development Co., Ltd. (GERD), during its refurbishment. It inc...
Wilt, M. et al Lawrence Berkeley National Laboratory
Feb 16, 2024
1 Resources
0 Stars
Publicly accessible

Magnetotelluric Data Collected in 2016 over the San Emidio Geothermal Field in Nevada

This data set includes the magnetotelluric (MT) data collected from October 21 to November 9, 2016 over the San Emidio geothermal field in Nevada by Quantec Geoscience USA Inc. on behalf of US Geothermal Inc. as part of a project entitled "A Novel Approach to Map Permeability Usi...
Folsom, M. et al Ormat Technologies, Inc.
Nov 09, 2016
11 Resources
0 Stars
Publicly accessible

Raw Pressure Data from Boise Hydrogeophysical Research Site (BHRS)

Pressure data from a phreatic aquifer was collected in the summer of 2013 during Multi-frequency Oscillatory Hydraulic Tomography pumping tests. All tests were performed at the Boise Hydrogeophysical Research Site. The data will be inverted using a fast steady-periodic adjoint-bas...
Lim, D. University of Wisconsin
Jul 17, 2013
20 Resources
0 Stars
Publicly accessible

Hydroshear Simulation Lab Test 2, Additional Data Sheets

This file contains additional data for this test (hydroshear test 3.2). In this test a sample of granite with a pre-cut (man made fracture) is confined, heated and differential stress is applied. The max temperature in this this system development test is 95C. More test details ca...
Bauer, S. Sandia National Laboratories
Aug 01, 2014
2 Resources
0 Stars
Publicly accessible

Hydroshear Simulation Lab Test 2

This data file is for test 2. In this test a sample of granite with a pre-cut (man made fracture) is confined, heated and differential stress is applied. The max temperature in this this system development test is 95C. More test details can be found on the spreadsheets--note that ...
Bauer, S. Sandia National Laboratories
Aug 01, 2014
3 Resources
0 Stars
Publicly accessible

Analyzed Boise Data for Oscillatory Hydraulic Tomography

Data here has been "pre-processed" and "analyzed" from the raw data submitted to the GDR previously (raw data files found at http://gdr.openei.org/submissions/479. doi:10.15121/1176944 after 30 September 2017). First, we submit .mat files which are the "pre-processed" data (must h...
Lim, D. University of Wisconsin
Jul 01, 2015
8 Resources
0 Stars
Publicly accessible

Fracture Sustainability Test, Pre and Post-Test Photomicrographs

The primary objective of this research is to understand how different rock types, mineral and fluid compositions, and fracture surface textures determine the longevity of fracture apertures, so that selection of reservoir rock can be economically optimized to reduce future refract...
Dobson, P. et al Lawrence Berkeley National Laboratory
Sep 26, 2016
9 Resources
0 Stars
Publicly accessible

Laboratory Evaluation of EGS Shear Stimulation-Test 001

This is the results of an initial setup-shakedon test in order to develop the plumbing system for this test design. a cylinder of granite with offset holes was jacketed and subjected to confining pressure and low temperature (85C) and pore water pressure. Flow through the sample w...
Bauer, S. Sandia National Laboratories
Jul 29, 2014
1 Resources
0 Stars
Publicly accessible

Utah FORGE Project 2439: Well 16B(78)-32 Field-Test Data from Mini-Frac Tests

This submittal includes the field-test data collected during stress tests conducted in the Utah FORGE 16B(78)-32 wellbore to measure/characterize the stresses in the geothermal reservoir. The type of stress test performed is referred to as a mini-frac test or a micro-frac test. Th...
Kelley, M. et al Battelle Memorial Institute
Jul 02, 2023
3 Resources
0 Stars
Publicly accessible

Community Geothermal: Final Thermal Conductivity Test Report and Data Logs Carbondale, CO

Provided here are a final thermal conductivity test report, a drilling log, and a heat rejection log from Carbondale, CO. Also attached is a report made before drilling, which contains predictions on the hydrogeologic conditions of the drill site. The forty-eight (48.9) hour in-si...
Ewbank, G. et al Clean Energy Economy for the Region (CLEER)
Oct 20, 2023
4 Resources
0 Stars
Publicly accessible

Distributed Acoustic Sensing (DAS) Data for Periodic Hydraulic Tests

California State University Long Beach evaluated hydraulic connectivity among geothermal wells using Periodic Hydraulic Testing (PHT) and Distributed Acoustic Sensing (DAS). The principal was to create a pressure signal in one well and observe the responding pressure signals in on...
Coleman, T. and Becker, M. California State University
Jul 06, 2017
35 Resources
0 Stars
Publicly accessible

Analysis of downhole data from USU-1 well Leidos Technical Report

USU Camas-1 is a geothermal test well drilled in Camas Prairie, Idaho, in the Summer and Fall of 2018. The purpose of this test well was to validate Play Fairway methodologies of the Snake River Plain Play Fairway Analysis project. In this report, test data are analyzed to infer...
Garg, S. and Goranson, C. Utah State University
Dec 04, 2018
1 Resources
0 Stars
Publicly accessible

High Temperature Chemical Sensing Tool: Preliminary pH and reference electrode test results

Project: High Temperature Chemical Sensing Tool for Distributed Mapping of Fracture Flow in EGS. Preliminary pH and reference electrode test results.
Cieslewski, G. Sandia National Laboratories
Sep 30, 2014
6 Resources
0 Stars
Publicly accessible

SiC Diode Test Data

Fabricated SiC diodes are tested in the temperature range of 300 degrees C to 600 degrees C.
Gilbert, G. Sandia National Laboratories
Aug 01, 2014
1 Resources
0 Stars
Publicly accessible

Images of Fracture Sustainability Test on Stripa Granite

Images of the Stripa Granite core before and after the fracture sustainability test. Photos of fracture faces of Stripa Granite core.
Kneafsey, T. Lawrence Berkeley National Laboratory
May 11, 2014
2 Resources
0 Stars
Publicly accessible

Microhole Test Data

Drilling results from the microhole project at the Sandia High Operating Temperature test facility. The project is seeking to help reduce the cost of exploration and monitoring of geothermal wells and formations by drilling smaller holes. The tests were part of a control algorith...
Su, J. Sandia National Laboratories
May 23, 2016
5 Resources
0 Stars
Publicly accessible

Post-Test SEM Examination of Brady Core, Desert Peak Core, and Stripa Granite Samples

As part of the shear-induced permeability test of Brady well BCH-03, Desert Peak well DP 35-13, and Stripa granite samples, the three post-test (reacted) rock samples were examined using a Scanning Electron Microscope (SEM). The SEM images of the core and elemental analysis are in...
Kneafsey, T. et al Lawrence Berkeley National Laboratory
Dec 23, 2015
4 Resources
0 Stars
Publicly accessible

USU Camas-1 Test Well: Documentation

This submission contains documents that describe the USU Camas-1 test well, drilled in Camas Prairie, Idaho, in Fall 2018 and Fall 2019. The purpose of this well is to validate exploration methodologies of the Snake River Plain (SRP) Play Fairway Analysis (PFA) project.
Shervais, J. Utah State University
Oct 31, 2018
13 Resources
0 Stars
Publicly accessible

West Flank Coso, CA FORGE Test Area

A map with the Coso West Flank FORGE test area outlined, along with regional seismicity, the aeromagnetic data set and the area currently being utilized for the creation of the 3D model.
Blankenship, D. Sandia National Laboratories
Nov 15, 2015
1 Resources
0 Stars
Publicly accessible

Pressure Data from Cranfield CO2 Thermosiphon Test

Pressure data acquired in well F2 and F3 during the CO2 geothermal thermosiphoning test, Cranfield MS.
Freifeld, B. Lawrence Berkeley National Laboratory
Jan 21, 2015
2 Resources
0 Stars
Publicly accessible

Shear Induced Permeability Test: Stripa Granite Temperature Pressure and Displacement Data

Spreadsheet containing the raw measured data, calibrated data, and brief explanation of data for Test1 Stripa Granite Geomechanical/Geochemical Test. Stress on fracture ~20.7 MPa.
Kneafsey, T. Lawrence Berkeley National Laboratory
Jun 21, 2014
1 Resources
0 Stars
Publicly accessible
12345Next >>