Search OEDI Data

Pushing the boundaries with geothermal tool development can often necessitate exceeding manufacturer specifications for temperature and pressure of individual circuit components. Detailed here are the efforts surrounding geothermal temperature characterization of commercially avai...

1301 Vertical Component seismic instruments were deployed at San Emidio Geothermal field in Nevada in December 2016. The first record starts at 2016-12-05T02:00:00.000000Z (UTC) and the last record ends at 2016-12-11T14:00:59.998000Z (UTC). Data are stored in individual files in o...

This engineering design and specification document contains the applications, specifications, testing, materials, and running methods for the Open-Hole Packer. The Open Hole Packer is designed to seal 8.5 to 9.75 inch open-holes with a 7 inch casing. The design is intended to seal...

Project and generator specifications and initial prototype test data for flap-type wave energy converters (WEC)

This document provides the applications, specifications, testing, materials, and running methods for the engineering team at PertoQuip to design the Locking Bridge Plug (LBP) and the Landing Profile (LP). This is the first step in developing a new tool for. The report includes ap...

Control System simulation models, case studies, and processing codes for analyzing field data. Raw data files included from VFD and SCADA. MatLab and Simulink are required to open some data files and all model files.

This dataset contains the Aquantis 2.5 MW Ocean Current Generation Device full scale mooring analysis report and specifications.

The data includes the membrane properties and specifications used for multi-configuration membrane distillation desalination. In this study, membranes from CLARCOR, 3M, and Aquastill are tested in counter-current, co-current and air-gap configurations at Colorado School of Mines (...

Operational performance requirements are needed to support development of specifications for downhole motor power sections to be used for drilling hard rock during geothermal wellbore construction. Theoretical torque specifications are derived based upon a widely-accepted rock-re...

The U.S. Department of Energys Zero Energy Ready Home (ZERH) recognition program builds upon the building science requirements of ENERGY STAR Certified Homes, Version 3 and best practices tested by the Building America research and demonstration program. Multifamily units (units i...

Includes specification sheet, wellbore geometry, and drilling fluids at section target depth associated with the design of Injection Well #1 (CCS1) for the Illinois Basin Decatur Project (IBDP).

System description of ORPC RivGen(R) Power System utilized at Igiugig, AK for testing of advanced controls

The curated fault model simulation data set consists of tagged and fully-described time series representing simulated faults for the AFDD test building (ORNLs Flexible Research Platform (FRP)), including baseline performance, faulty performance, and corresponding energy impact. A ...

**Overview** The purpose of this dataset is to provide preliminary filtered, averaged lidar data and standardize the data format of various datastreams from the buoy into NetCDF. **Data Quality** Standard filtering thresholds on the averaged data were applied and several data f...

**Overview** The purpose of the dataset is to provide preliminary filtered, averaged lidar data and standardize the data format of various datastreams from the buoy into NetCDF. The attached Lidar Buoy Data Dictionary provides further details on the various instruments mounted on...

The submission is the combined design report for the HydroAir Power Take Off (PTO). CAD drawings, circuit diagrams, design report, test plan, technical specifications and data sheets are included for the Main and auxiliary control cabinets and three-phase-synchronous-motor with a ...

This raw data reflects readings from instruments mounted on or near a 82 meter meteorological tower located at the [National Wind Technology Center (NWTC)](http://www.nrel.gov/wind/ "NWTC website"), approximately 5 miles south of Boulder, CO (specifically: 39.9107 N, 105.2348 W, d...

**Overview** The purpose of this dataset is to provide preliminary filtered, averaged lidar data and standardize the data format of various data streams from the buoy into NetCDF. The attached Lidar Buoy Data Dictionary provides further details on the various instruments mounted...

This raw data reflects readings from instruments mounted on or near a 82 meter meteorological tower located at the [National Wind Technology Center (NWTC)](http://www.nrel.gov/wind/ "NWTC website"), approximately 5 miles south of Boulder, CO (specifically: 39.9107 N, 105.2348 W, d...

**Overview** The purpose of the dataset is to provide preliminary filtered, averaged buoy data and standardize the data format of various data streams from the buoy into NetCDF. The attached Lidar Buoy Data Dictionary provides further details on the various instruments mounted o...

The Geospatial Toolkit (GsT) is a map viewer developed by the National Renewable Energy Laboratory (NREL). The toolkit helps energy planners, project developers, researchers and others identify areas of a country that show good potential for renewable energy projects. The toolkit ...

The Geospatial Toolkit (GsT) is a map viewer developed by the National Renewable Energy Laboratory (NREL). The toolkit helps energy planners, project developers, researchers and others identify areas of a country that show good potential for renewable energy projects. The toolkit ...

The Geospatial Toolkit (GsT) is a map viewer developed by the National Renewable Energy Laboratory (NREL). The toolkit helps energy planners, project developers, researchers and others identify areas of a country that show good potential for renewable energy projects. The toolkit ...