Search OEDI Data

Northwest National Marine Renewable Energy Center, OR Final Technical Report & Appendices

In 2008, the US Department of Energy (DOE) Wind and Water Power Program issued a funding opportunity announcement to establish university-led National Marine Renewable Energy Centers. Oregon State University and the University of Washington combined their capabilities in wave and ...

Hellin, D. Northwest National Marine Renewable Energy Center

Jun 30, 2016
2 Resources
0 Stars
Publicly accessible

2018 Annual Technology Baseline ATB Cost and Performance Data for Electricity Generation Technologies Interim Data Without Geothermal Updates

Each year since 2015 NREL has presented Annual Technology Baseline ATB in a workbook that contains detailed cost and performance data both current and projected for renewable and conventional technologies. The workbook includes a spreadsheet for each technology. This workbook prov...

Augustine, C. et al National Renewable Energy Laboratory

Jun 29, 2018
1 Resources
0 Stars
Publicly accessible

WEC Controls Optimization Final Report

The over-arching project objective is to fully develop and validate optimal controls frameworks that can subsequently be applied widely to different WEC devices and concepts. Optimal controls of WEC devices represent a fundamental building block for WEC designers that must be cons...

Previsic, M. and Karthikeyan, A. Re Vision Consulting

Aug 26, 2020
1 Resources
0 Stars
Publicly accessible

TEAMER: Accelerated Lifetime Testing of Main Shaft Seals for Tidal Turbine Rotors

The lifetime assessment experimental platform described in this report is specifically designed for testing the low-speed main shaft seal for Verdant Power's (Verdant Power Inc., New York, New York) fifth-generation (Gen5) underwater power generation turbine. This project is joint...

Murray, R. et al National Renewable Energy Laboratory

Jul 01, 2024
2 Resources
0 Stars
Publicly accessible

Laboratory Experiments for Highly Nonlinear WEC-Wave Conditions

This document describes the experiments carried out in December 2019 and February-March 2020 in the Directional Wave Basin at the O.H. Hinsdale Wave Research Laboratory, Oregon State University. Regular and irregular waves were generated in the absence and presence of a WEC, inclu...

Robertson, B. et al Oregon State University

Apr 30, 2020
1 Resources
0 Stars
Publicly accessible

Cone Penetration Tests at the PacWave South Test Site

This ZIP archive contains cone penetration test data from the PacWave South Test Site. The data were collected in September 2023 aboard the ship Seacor Lee operating out of the Port of Newport, OR. The tests were performed by ConeTec using an AP van den Berg ROSON-100. The cone it...

Evans, M. Pacific Marine Energy Center (PMEC)

Sep 07, 2023
6 Resources
0 Stars
Publicly accessible

Reports on Wave and Tidal Energy Cost Reduction and Performance Improvement Opportunities

This submission contains two resources developed by Booz Allen Hamilton Inc. in 2025 for the U.S. Department of Energy/Water Power Technologies Office (WPTO). The study identifies near-term opportunities to reduce costs and improve performance in wave and tidal current energy syst...

Yüzügüllü, E. Booz Allen Hamilton Inc.

May 27, 2025
2 Resources
0 Stars
Publicly accessible

TEAMER: Deeply Embedded Ring Anchor Fatigue Life Optimization

The data provided in this submission contain the analysis input files and result post-processing spreadsheets and scripts to perform the CFD analysis, load case development, strength FEA, fatigue FEA, and optimization tasks outlined in the project report. Below is a summary of the...

Mane, S. et al Stress Engineering Services, Inc.

Jun 15, 2026
4 Resources
0 Stars
Publicly accessible

TEAMER: Water Tunnel Data from Testing the Pterofin Skimmer Concept

Pterofin's Skimmer concept relies on a flapping and pitching hydrofoil to extract hydrokinetic energy from water flows. The concept aims to utilize unsteady fluid dynamics phenomena (added mass, shed vorticity, and unsteady boundary layer development) to achieve higher lift coeffi...

Jaffa, N. et al Pennsylvania State University, Applied Research Laboratory

Jul 13, 2023
7 Resources
0 Stars
Publicly accessible

TEAMER: Field Demonstration of MarineSitu Marine Energy Monitoring Tools (Public)

This submission contains data collected during a four-month field demonstration (July-October 2024) of MarineSitu's Adaptable Monitoring Package (AMP) at the Pacific Northwest National Laboratory (PNNL) Marine and Coastal Research Laboratory (MCRL) in Sequim, WA. The project evalu...

Joslin, J. et al MarineSitu

Aug 21, 2026
6 Resources
0 Stars
Publicly accessible

TEAMER: Tidal Energy Resource Modeling Assessment and Environmental Biological Analysis in Turnagain Arm, Cook Inlet, AK

The deployment and operation of a floating and/or submerged tidal technology in the United States coastal water require characterizing tidal stream resource potential and assessing environmental conditions and satisfying all environmental permitting requirements. The waters of Coo...

Yang, Z. et al Pacific Northwest National Laboratory

Jun 09, 2025
3 Resources
0 Stars
Publicly accessible

Wave Tank Testing Report for Controls Validation of a Heaving Point Absorber

The core objectives of this project is to improve the power capture of three different wave energy conversion (WEC) devices by more than 50% using an advanced control system and validate the attained improvements using wave tank and full scale testing. In parallel, we will bring a...

Previsic, M. et al Re Vision Consulting

Aug 26, 2020
3 Resources
0 Stars
Publicly accessible

TEAMER: Numerical Modeling of the Pitching Inertial Pump (PIP) Wave Energy Capture Device

This project focused on further development of a Numerical Model of the iProTech Pitching Inertial Pump (PIP) wave energy converter (WEC) using the MATLAB/Simulink tool, WEC-Sim. The process involved parameterizing key design variables, running time-domain simulations, and perform...

Wynn, N. et al IProTech

Feb 26, 2026
1 Resources
0 Stars
Publicly accessible

TEAMER: UMass 2-Body WEC Techno-Economic Assessment

The University of Massachusetts (UMass) is developing a 2-body wave energy converter (WEC) device that is converting mechanical power into electricity using a mechanical motion rectifier that allows the system to couple to a flywheel. UMass has completed numerical modeling, wave t...

Previsic, M. Re Vision Consulting

Nov 19, 2024
2 Resources
0 Stars
Publicly accessible

Wave Tank Testing of 1-DoF Heaving Buoy for Controls Validation Purposes

This submission includes the wave tank testing data used to validate the controls optimization efforts of a heaving 1-DoF buoy.

Previsic, M. et al Re Vision Consulting

Jul 13, 2017
4 Resources
0 Stars
Publicly accessible

TEAMER: Techno-Economic Assessment of AWS Waveswing

The submitted information includes the final report and the supporting datasets in Excel format. Submitted data includes: an Excel based techno-economic model with input-output (IO) analysis, costing functions in generalized form, performance metrics and computation, and scatte...

Previsic, M. Re Vision Consulting

Mar 07, 2025
3 Resources
0 Stars
Publicly accessible

Magnetic Gears for a Marine Hydrokinetic Generator Component Model

The goal of this project is to design, fabricate, and test a hermetically sealed 50 kilowatt (kW) multistage magnetically geared generator (MGG). The Component Content Model provides data submitters with an easy and consistent means of uploading data and associated meta data about...

Bird, J. et al Portland State University

Jul 30, 2021
1 Resources
0 Stars
Publicly accessible

CalWave Open Water Demo Budget Period 1 Reports

The objective of the project is to advance the Technology Readiness Level (TRL) of the Wave Energy Converter (WEC) developed by CalWave Wave Power Technologies Inc (CalWave) through advanced numerical simulations, dynamic hardware tests, and ultimately a scaled open water demonstr...

Boerner, T. et al CalWave Power Technologies Inc.

Jun 03, 2019
8 Resources
0 Stars
Publicly accessible

TEAMER: Drifting Hydrophone System Block Diagram and Pre-Amplifier Calibrations

This data release is part of TEAMER RFTS 2, where the Cooperative Institute for Marine Resources Studies (CIMRS) at Oregon State University is performing hardware and software development and integration of four newly designed drifting hydrophone systems for underwater noise measu...

Turnbull, J. et al Pacific Marine Energy Center (PMEC)

Feb 26, 2024
3 Resources
0 Stars
Publicly accessible

Virtual Real-Time Hybrid Simulation for Wave Energy Converter Mooring Lines

This submission contains the code, model files, and instructions required to virtually run a real-time hybrid simulation (RTHS) of a wave energy converter (WEC) mooring line model. The virtual RTHS (or VRTHS) couples a numerical model of the WEC with a numerical model of the moori...

Robertson, B. and McConnell, A. Oregon State University

Sep 22, 2026
1 Resources
0 Stars
Publicly accessible

Laboratory Upgrade Point Absorber WEC-Sim Model with MoorDyn Moorings

This dataset includes a WEC-Sim and MoorDyn model of the Laboratory Upgrade Point Absorber (LUPA). LUPA is an open-source wave energy converter designed and tested by Oregon State University. The files provided here constitute a stable LUPA configuration with three mooring lines. ...

Mcconnell, A. Oregon State University

Oct 08, 2024
2 Resources
0 Stars
Publicly accessible

Wave Carpet Controls Design Optimization

To assess CalWave's submerged Wave Carpet Technology for system performance advancement, CalWave seeks to test advanced controls methodologies on a simplified wave carpet model, which potentially can be used in further research to leverage the design to a full wave carpet assessme...

Previsic, M. and Karthikeyan, A. Re Vision Consulting

Aug 26, 2020
1 Resources
0 Stars
Publicly accessible

TEAMER: Technical Support for Aquantis (Materials): CRD-21-17762-0

The Aquantis Tidal Power Tug is a unique synthesis of best-available technologies and materials configured as a novel spar vessel to create an optimal platform for tidal stream energy conversion. The Power Tug utilizes an upstream-facing horizontal, 2-bladed rotor. To drive down c...

Swales, H. et al Aquantis, Inc.

Oct 17, 2024
3 Resources
0 Stars
Publicly accessible

TEAMER: OpenFAST Modeling and Simulation of the Aquantis AQ10 Marine Hydrokinetic Turbine

This dataset was developed under TEAMER technical support (CRD-21-17763-0) to model the Aquantis AQ10, a spar buoy-based marine hydrokinetic turbine, using the OpenFAST simulation framework. The project transitioned modeling from the proprietary Tidal Bladed tool to OpenFAST to en...

Swales, H. and Tran, T. Aquantis, Inc.

Jul 31, 2025
3 Resources
0 Stars
Publicly accessible

TEAMER: Supporting model output files for Environmental Compliance Framework for Floating Tidal Turbines, Cook Inlet, AK

Orbital Marine Power (Orbital) is seeking to deploy their floating tidal technology in US waters and has considered the possibility of deploying in temperate waters including the Pacific Northwest (PNW) and the Western Passage, Maine. It has become apparent that some of the most p...

Wang, T. et al Pacific Northwest National Laboratory

Mar 01, 2023
5 Resources
0 Stars
Publicly accessible

1 2 3 4 5 Next >>