TEAMER: Drifting Hydrophone System - Block Diagram and Pre-Amplifier Calibrations
This data release is part of TEAMER RFTS 2, where the Cooperative Institute for Marine Resources Studies (CIMRS) at Oregon State University is performing hardware and software development and integration of four newly designed drifting hydrophone systems for underwater noise measurements at marine renewable energy projects. These new acoustic systems will provide advanced technology support available for use at both tidal and wave energy deployments adding additional resources to the limited amount of drifting hydrophone technologies that are available to the marine energy community
The submission data contains 2 files plus a Post-Access Report:
One file containing the calibration parameters for four (4) pre-amplifier boards used on the drifting hydrophones. Pre-amplifier boards are model "WB PREAMP REV6," with serial numbers; 28, 29, 30, and 31.
One image file illustrating the system functional block diagram of the drifting hydrophone system configuration.
Citation Formats
TY - DATA
AB - This data release is part of TEAMER RFTS 2, where the Cooperative Institute for Marine Resources Studies (CIMRS) at Oregon State University is performing hardware and software development and integration of four newly designed drifting hydrophone systems for underwater noise measurements at marine renewable energy projects. These new acoustic systems will provide advanced technology support available for use at both tidal and wave energy deployments adding additional resources to the limited amount of drifting hydrophone technologies that are available to the marine energy community
The submission data contains 2 files plus a Post-Access Report:
One file containing the calibration parameters for four (4) pre-amplifier boards used on the drifting hydrophones. Pre-amplifier boards are model "WB PREAMP REV6," with serial numbers; 28, 29, 30, and 31.
One image file illustrating the system functional block diagram of the drifting hydrophone system configuration.
AU - Turnbull, James
A2 - Matsumoto, Haru
A3 - Haxel, Joseph
DB - Open Energy Data Initiative (OEDI)
DP - Open EI | National Renewable Energy Laboratory
DO - 10.15473/2339895
KW - marine
KW - energy
KW - TEAMER
KW - hydrophone
KW - calibration
KW - acoustics
KW - RFTS 2
KW - technology
KW - Excel
LA - English
DA - 2024/02/26
PY - 2024
PB - Pacific Marine Energy Center (PMEC)
T1 - TEAMER: Drifting Hydrophone System - Block Diagram and Pre-Amplifier Calibrations
UR - https://doi.org/10.15473/2339895
ER -
Turnbull, James, et al. TEAMER: Drifting Hydrophone System - Block Diagram and Pre-Amplifier Calibrations. Pacific Marine Energy Center (PMEC), 26 February, 2024, MHKDR. https://doi.org/10.15473/2339895.
Turnbull, J., Matsumoto, H., & Haxel, J. (2024). TEAMER: Drifting Hydrophone System - Block Diagram and Pre-Amplifier Calibrations. [Data set]. MHKDR. Pacific Marine Energy Center (PMEC). https://doi.org/10.15473/2339895
Turnbull, James, Haru Matsumoto, and Joseph Haxel. TEAMER: Drifting Hydrophone System - Block Diagram and Pre-Amplifier Calibrations. Pacific Marine Energy Center (PMEC), February, 26, 2024. Distributed by MHKDR. https://doi.org/10.15473/2339895
@misc{OEDI_Dataset_8086,
title = {TEAMER: Drifting Hydrophone System - Block Diagram and Pre-Amplifier Calibrations},
author = {Turnbull, James and Matsumoto, Haru and Haxel, Joseph},
abstractNote = {This data release is part of TEAMER RFTS 2, where the Cooperative Institute for Marine Resources Studies (CIMRS) at Oregon State University is performing hardware and software development and integration of four newly designed drifting hydrophone systems for underwater noise measurements at marine renewable energy projects. These new acoustic systems will provide advanced technology support available for use at both tidal and wave energy deployments adding additional resources to the limited amount of drifting hydrophone technologies that are available to the marine energy community
The submission data contains 2 files plus a Post-Access Report:
One file containing the calibration parameters for four (4) pre-amplifier boards used on the drifting hydrophones. Pre-amplifier boards are model "WB PREAMP REV6," with serial numbers; 28, 29, 30, and 31.
One image file illustrating the system functional block diagram of the drifting hydrophone system configuration. },
url = {https://mhkdr.openei.org/submissions/535},
year = {2024},
howpublished = {MHKDR, Pacific Marine Energy Center (PMEC), https://doi.org/10.15473/2339895},
note = {Accessed: 2025-05-04},
doi = {10.15473/2339895}
}
https://dx.doi.org/10.15473/2339895
Details
Data from Feb 26, 2024
Last updated May 1, 2025
Submitted Feb 26, 2024
Organization
Pacific Marine Energy Center (PMEC)
Contact
James Turnbull
541.867.0272
Authors
Original Source
https://mhkdr.openei.org/submissions/535Research Areas
Keywords
marine, energy, TEAMER, hydrophone, calibration, acoustics, RFTS 2, technology, ExcelDOE Project Details
Project Name Testing Expertise and Access for Marine Energy Research
Project Lead Lauren Ruedy
Project Number EE0008895