Search OEDI Data
Showing results 1 - 25 of 2285.
Show
results per page.
Order by:
Available Now:
Research Areas
Accessibility
Data Type
Organization
Source
LLNL LIDAR Halo Streamline XR+ pre-campaign / Proc Data
**Overview**
This is a pre-campaign instrument deployment. With it, we aim to upload data and test/verify the ingest pipeline.
**Data Quality**
Adding signal-to-noise ratio can exclude data based on this value.
Newsom, R. Wind Energy Technologies Office (WETO)
Jan 02, 2022
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
PNNL LIDAR Halo Streamline XR+ (1) pre-campaign / Raw Data
**Overview**
This is a pre-campaign instrument deployment. With it, we aim to upload data and test/verify the ingest pipeline.
**Data Quality**
Adding signal-to-noise ratio can exclude data based on this value.
Newsom, R. Wind Energy Technologies Office (WETO)
Feb 23, 2021
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Lidar DOE ARM StreamLine Doppler Lidar (Halo) Raw Data
**Overview**
Refer to attached documentation.
**Data Details**
**Product type should be "derived" not "observed."**
**Data Quality**
Refer to attached documentation.
**Uncertainty**
Refer to attached documentation.
Newsom, R. Wind Energy Technologies Office (WETO)
Mar 05, 2015
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Lidar ND Halo Scanning Doppler, Boardman Derived Data
**Overview**
The University of Notre Dame (ND) scanning LiDAR dataset used for the WFIP2 Campaign is provided. The LiDAR is a Halo Photonics Stream Line Scanning Doppler LiDAR.
**It is highly recommended to discuss any planned use of these data with University of Notre Dame scie...
Fernando, J. et al Wind Energy Technologies Office (WETO)
Dec 12, 2015
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Lidar ND Halo Scanning Doppler, Boardman Processed Data
**Overview**
The University of Notre Dame (ND) scanning LiDAR dataset used for the WFIP2 Campaign is provided. The LiDAR is a Halo Photonics Stream Line Scanning Doppler LiDAR.
**It is highly recommended to discuss any planned use of these data with University of Notre Dame scie...
Fernando, J. et al Wind Energy Technologies Office (WETO)
Dec 12, 2015
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Lidar ND Halo Scanning Doppler, Boardman Reviewed Data
**Overview**
The University of Notre Dame (ND) scanning LiDAR dataset used for the WFIP2 Campaign is provided. The LiDAR is a Halo Photonics Stream Line Scanning Doppler LiDAR.
**It is highly recommended to discuss any planned use of these data with University of Notre Dame scie...
Fernando, J. et al Wind Energy Technologies Office (WETO)
Dec 12, 2015
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Lidar ND Halo Scanning Doppler, Boardman Raw Data
**Overview**
The University of Notre Dame (ND) scanning lidar dataset used for the WFIP2 Campaign is provided. The raw dataset contains the radial velocity and backscatter measurements along with the beam location and other lidar parameters in the header.
**Data Details**
1) ...
Fernando, J. et al Wind Energy Technologies Office (WETO)
Dec 12, 2015
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
NWTC Lidar (3) Pre-campaign /RTD Data
**Overview**
This is a pre-campaign instrument deployment. With it, we aim to upload data and test and verify the ingest pipeline.
Debnath, M. Wind Energy Technologies Office (WETO)
Feb 07, 2022
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
NWTC LIDAR pre-campaign / Raw Data
**Overview**
This is a pre-campaign instrument deployment. With it we aim to upload data and test/verify the ingest pipeline.
Burk, K. Wind Energy Technologies Office (WETO)
Sep 29, 2021
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
NWTC WindCube Nacelle Lidar pre-campaign / Raw Data
**Overview**
Test data from the National Wind Technology Center (NWTC) for the WindCube Nacelle Lidar. Includes both real-time and 10-min average data.
Scholbrock, A. and Zalkind, D. Wind Energy Technologies Office (WETO)
Feb 01, 2022
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Lidar LLNL ZephIR Profiler, Arlington Airport Reviewed Data
**Overview**
These are 10-min averaged data from a vertical-profiling ZephIR 300 lidar.
Data collected at the Arlington airport for the WFIP2 project.
March 10, 2016 April 1, 2017
**Data Details**
1 Hz data are available from:
wharton4@llnl.gov
**Data Quality**
Instrument ...
Wharton, S. Wind Energy Technologies Office (WETO)
Mar 09, 2016
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Lidar LLNL WindCube V2, Vansycle Ridge BPA Tower Reviewed Data
**Overview**
Data submission for WFIP2 at Vansycle Ridge (Oregon).
Vertical-profiling lidar data from a Wind Cube v2, included 10-minute averages of wind speed and wind direction up to 200 m. Data collected during WFIP2.
**Data Details**
Z-wind has the following notation:
neg...
Wharton, S. Wind Energy Technologies Office (WETO)
Mar 08, 2016
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Lidar HilFlowS LLNL ZephIR300 MOP Processed Data
**Overview**
The ZephIR300 is a continuous wave LIDAR with a range of 10 m to 300 m. During HilFlowS the ZephIR300 was programmed to measure from 10 m to 150 m. In addition, the ZephIR300 provided a measurement at 1 m height using an onboard meteorological sensor. The ZephIR300 ...
Wharton, S. and , . Wind Energy Technologies Office (WETO)
Jul 07, 2019
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Lidar HilFlowS LLNL ZephIR300 WOP Processed Data
**Overview**
The ZephIR300 is a continuous wave LIDAR with a range of 10 m to 300 m. During HilFlowS the ZephIR300 was programmed to measure from 10 m to 150 m. In addition, the ZephIR300 provided a measurement at 1 m height using an onboard meteorological sensor. The ZephIR300 ...
Wharton, S. and , . Wind Energy Technologies Office (WETO)
Jul 07, 2019
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Lidar HilFlowS LLNL WindCube v2 EOP Processed Data
**Overview**
The WindCube v2 is a pulsed LIDAR and uses four beams sent in succession in the four cardinal directions along a 28°scanning cone angle to measure horizontal velocity and wind direction. A fifth beam is sent in the vertical direction to measure vertical velocity. Me...
Wharton, S. and , . Wind Energy Technologies Office (WETO)
Jul 07, 2019
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
NWTC Ceilometer (1) Pre-campaign / Raw Data
**Overview**
This instrument will be testing the data transfer process pre-before deploying the campaign. The netCDF L1 data file contains level 1 (L1) data from the ceilometer.
**Data Quality**
Raw data from ceilometer
Hamilton, N. and Zalkind, D. Wind Energy Technologies Office (WETO)
Sep 20, 2018
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Powder X-ray Diffraction Data from Well 16A(78)-32 Core
This dataset from Lawrence Livermore National Laboratory (LLNL) consists of four raw X-ray diffraction (XRD) scans and preliminary results of quantitative XRD analysis. The scanned samples were prepared from four subcores, which came from various depths of the FORGE well 16A(78)-3...
Kroll, K. et al Lawrence Livermore National Laboratory
Jul 27, 2023
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
NWTC Ceilometer (1) Pre-campaign / Reviewed Data
**Overview**
This instrument will be testing the data transfer process before deploying the campaign. The netCDF L2 data file from the ceilometer contains level 2 (L2) data that has gone through the precalculation service and averaging.
The profile is set to 4500 m (14 764 ft).
...
Hamilton, N. and Zalkind, D. Wind Energy Technologies Office (WETO)
Sep 20, 2018
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
PNNL Laser Disdrometer #1 pre-campaign / Raw Data
**Overview**
The Parsivel2 Laser Disdrometers provide accurate measurements of precipitation, hail and snow. They also provide droplet size distributions.
Krishnamurthy, R. Wind Energy Technologies Office (WETO)
Dec 21, 2021
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
PNNL MET #1 pre-campaign / Raw Data
**Overview**
This dataset tests the data transfer and processing for a surface flux station, which includes low-speed weather information and high-speed sonic anemometer data.
Goldberger, L. Wind Energy Technologies Office (WETO)
Sep 22, 2015
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
PNNL Parsivel2 Laser Disdrometer #2 pre-campaign / Raw Data
**Overview**
The Parsivel2 Laser Disdrometers provide accurate measurements of precipitation, hail and snow. They also provide droplet size distributions.
Krishnamurthy, R. Wind Energy Technologies Office (WETO)
Dec 26, 2021
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
NASA Building 12 Wind Turbines Phase 1 Data
Completed in December 2014, the NASA Building 12 installation consists of four Urban Green Energy Eddy GT turbines. The NASA Building 12 project involved detailed pre-construction and post-construction measurements. NREL researchers initiated a measurement campaign consisting of m...
Fields, J. and NREL, . National Renewable Energy Laboratory
Dec 28, 2015
2 Resources
0 Stars
In curation
2 Resources
0 Stars
In curation
NWTC Ceilometer (1) Pre-campaign / Derived Data
**Overview**
This instrument will be testing the data transfer process before deploying the campaign.
The netCDF L3 data file has level 3 (L3) data that have gone through the calculation service and contains all the data from the algorithms, including mixing layer height values ...
Hamilton, N. and Zalkind, D. Wind Energy Technologies Office (WETO)
Sep 20, 2018
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Hawthorne Nevada Deep Direct-Use Feasibility Study LiDAR
The objective of this project is to use a multi-disciplinary, three-tiered approach to assess the geothermal resource and determine the feasibility of implementing a large-scale, direct-use facility for the Hawthorne Army Depot (HAD) and the various town and county facilities in H...
Lowry, T. Nevada Bureau of Mines and Geology
Mar 29, 2018
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Brady Geothermal Field Well Pumping Data During Deployment
Contains pumping data associated with the wells used in the 2016 Spring Campaign led partially by UW Madison, LBNL, and LLNL scientists. The well coordinates and the depths to the pressure sensors used in the pumping wells can be found at the link "Coordinates and Sensor Depths" b...
Feigl, K. University of Wisconsin
Mar 30, 2016
3 Resources
0 Stars
Publicly accessible
3 Resources
0 Stars
Publicly accessible