Search OEDI Data

Utah FORGE: 2D and 3D Seismic Data

This set of data contains raw and Initially-processed 2D and 3D seismic data from the Utah FORGE study area near Roosevelt Hot Springs. Reprocessed versions of these data can be accessed at the linked submission in the Resources section titled "Reprocessed Seismic Reflection Data....

Miller, J. Energy and Geoscience Institute at the University of Utah

Mar 16, 2018
21 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 2: Preliminary Test Wells Locations and Orientations

The EGS Collab project is evaluating a site for Experiment 2 (hydraulic fracturing/shearing) at a depth of 1.25 km in the Sanford Underground Research Facility (SURF) on the 4100 Level. Two early test holes were drilled in an alcove (formerly known as Battery Charging Station) nea...

Neupane, G. et al Idaho National Laboratory

Dec 19, 2019
4 Resources
0 Stars
Publicly accessible

Finite Element Analysis (FEA) for Water-Foam Fracturing of Granite Rock

In addition to the foam data that were obtained from literature and that were collected from the current study, simulation data was also generated from finite element analysis (FEA) conducted in this study using COMSOL Multiphysics software. The FEA models were built to simulate t...

Thakor, V. et al Temple University

May 04, 2021
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Triaxial Direct Shear Results

This submission contains a report and associated data from triaxial direct shear tests conducted by Los Alamos National Laboratory. The samples used were sourced from 16A(78)-32 well core. The primary objectives of this test were to determine the shear strength in both intact an...

Frash, L. et al Los Alamos National Laboratory

Aug 14, 2023
1 Resources
0 Stars
Publicly accessible

West Flank Coso FORGE: Natural Fracture Data

Natural fracture data from wells 33-7, 33A-7,52A-7, 52B-7 and 83-11 at West Flank. Fracture orientations were determined from image logs of these wells (see accompanying submissions). Data files contain depth, apparent (in wellbore reference frame) and true (in geographic referenc...

Blankenship, D. Sandia National Laboratories

May 16, 2016
1 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 2: Hydraulic Pressure Test Results

The EGS Collab experiment 2 was focused on testing shear stimulation techniques. Shear stimulation, in this case, means using hydraulic pressure to cause shear slip on preexisting fracture or fault planes such that the hydraulic conductivity of the fracture or fault increases. The...

Burghardt, J. et al Lawrence Berkeley National Laboratory

Feb 17, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE Project 3-2535: Modeling Studies of Energized Steel-Casing Source EM Method for Detecting Stimulated Zone

Numerical modeling Studies for electromagnetic (EM) Data Acquisition Survey Design this milestone report describes the 3D modeling studies of energized steel-casing source electromagnetic method for detecting stimulated zone at the Utah FORGE Site. FORGE project 3-2535 is planning...

Um, E. et al Lawrence Berkeley National Laboratory

Feb 06, 2023
4 Resources
0 Stars
Publicly accessible

Utah FORGE Project 3-2535: Compilation of Geodetic Data and Estimation of Associated Deformation

Report on possible geodetic signature of the 3 stimulations in April 2022 as well as a comparison with existing InSAR data gathered over the site before, during, and after the stimulation. In geothermal production it is important to understand the existing stress field and the cha...

Vasco, D. et al Lawrence Berkeley National Laboratory

Apr 29, 2022
4 Resources
0 Stars
Publicly accessible

Feasibility of a Deep Direct-Use Geothermal System at the University of Illinois Urbana-Champaign

Paper authored by Stumpf et al. for the 2018 Geothermal Resources Council Annual Meeting held in Reno, NV USA. Included with the paper is the Microsoft PowerPoint presentation made at the GRC meeting and data tables associated with some of the figures.

Stumpf, A. et al University of Illinois

Dec 31, 2018
6 Resources
0 Stars
Publicly accessible

April 2014 Dixie Valley Binary Cycle Production Data

Generation data associated with binary unit. Used to demonstrate the techno-economic feasibility of utilizing the available unused heat to generate additional electric power from a binary power plant. *Note This data is incomplete. See link "Monthly Production Data September 2014...

Lee, V. Terra-Gen Sierra Holdings, LLC

Apr 30, 2014
2 Resources
0 Stars
Publicly accessible

Development of 3D Geological Model of Tuscarora Sandstone for Feasibility of Deep Direct-Use Geothermal at West Virginia University Main Campus

The subsurface uncertainty at West Virginia University Main Campus is dominated by the uncertainty in the projections of geofluid flowrate in the target formation, the Tuscarora Sandstone. In this paper, three cores from the heterogeneous reservoir, available through West Virginia...

Moore, J. et al West Virginia University

Oct 23, 2018
5 Resources
0 Stars
Publicly accessible

Snake River Plain Geothermal Play Fairway Analysis Project MT Data

MT is measured in the field by using induction coils to measure the time-varying magnetic source for frequencies between 1000-0.001~Hz, and electric dipoles to measure the Earth's electrical response. Because the magnetic source field is polarized, orthogonal directions of the f...

Peacock, J. et al United States Geological Survey

May 06, 2018
3 Resources
0 Stars
Publicly accessible

Washington Play Fairway Analysis Poly 3D Matlab Fault Modeling Scripts with Input Data to Create Permeability Potential Models

Matlab scripts and functions and data used to build Poly3D models and create permeability potential GIS layers for 1) Mount St. Helens seismic zone, 2) Wind River Valley, and 3) Mount Baker geothermal prospect areas located in Washington state.

Swyer, M. AltaRock Energy Inc

Feb 05, 2015
4 Resources
0 Stars
Publicly accessible

Core-Shell REE Sorbent Extraction Data

Solution chemical analysis data for magnetic core shell sorbent materials. Deionized water and brine solutions were spiked with five rare earth elements and the solutions analyzed after approximately 5 minutes exposure to the sorbent particles.

Thallapally, P. Pacific Northwest National Laboratory

Apr 27, 2017
1 Resources
0 Stars
Publicly accessible

Chlorite Dissolution Rates

Spreadsheets provides measured chlorite rate data from 100 to 300 degrees C at elevated CO2. Spreadsheet includes derived rate equation.

Carroll, S. Lawrence Livermore National Laboratory

Jul 01, 2013
1 Resources
0 Stars
Publicly accessible

University of Illinois Campus Deep Direct-Use Feasibility Study Chemistry of Formation Waters

Studies of chemical composition of natural brines from rock formations in the Illinois Basin as part of the University of Illinois deep direct-use feasibility study.

Lin, Y. et al University of Illinois

Apr 23, 2018
6 Resources
0 Stars
Publicly accessible

University of Illinois Campus Deep Direct-Use Feasibility Study Bedrock Geology ArcGIS Layers

Bedrock Geology of Champaign County, Illinois, map layers (shapefiles). Layers included: 1) Champaign County bedrock units. 2) Champaign County bedrock surface contours. Contour interval of 25 feet. 3) Colchester coal surface contours. Contour interval of 50 feet. 4) Kimmswick...

Nelson, W. University of Illinois

Mar 20, 2018
1 Resources
0 Stars
Publicly accessible

Utah FORGE Project 3-2535: Building a 3D Resistivity Model for Simulation and Survey Design of EM Measurements

The included report outlines the creation of three 3D resistivity models that will be used to determine the sensitivity of EM measurements for the hypothetical stimulated reservoir at FORGE as well as for EM survey design. FORGE project 3-2535 is planning on using a casing source ...

Alumbaugh, D. et al Lawrence Berkeley National Laboratory

Dec 01, 2022
5 Resources
0 Stars
Publicly accessible

Active Management of Integrated Geothermal-CO2 Storage Reservoirs in Sedimentary Formations

The purpose of phase 1 is to determine the feasibility of integrating geologic CO2 storage (GCS) with geothermal energy production. Phase 1 includes reservoir analyses to determine injector/producer well schemes that balance the generation of economically useful flow rates at the ...

A., T. Lawrence Livermore National Laboratory

Jan 01, 2012
9 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 3 Microgravity Data

A 4D microgravity survey began in early 2019 in order to benchmark surface and subsurface elevations prior to Phase 3 drilling and stimulation campaigns. Microgravity stations are collocated with GPS deformation benchmarks and use the same location survey data. Surveys are underta...

Hardwick, C. Utah Geological Survey

Oct 07, 2020
1 Resources
0 Stars
Publicly accessible

CO2 Push-Pull Single Fault Injection Simulations

ASCII text files containing grid-block name, X-Y-Z location, and multiple parameters from TOUGH2 simulation output of CO2 injection into an idealized single fault representing a dipping normal fault at the Desert Peak geothermal field (readable by GMS). The fault is composed of a ...

Borgia, A. et al Lawrence Berkeley National Laboratory

Sep 21, 2017
5 Resources
0 Stars
Publicly accessible

Utah FORGE: Earth Model Mesh Data for Selected Surfaces

This submission contains a number of data files with vertices of meshed/interpolated surfaces used in the Phase 2B earth model. Examples include land surface (based on 10-meter DEM), the granitoid-basin fill contact, several faults, and also interpolated temperature isosurfaces f...

Podgorney, R. Idaho National Laboratory

Dec 07, 2018
6 Resources
0 Stars
Publicly accessible

Pressure Data from Cranfield CO2 Thermosiphon Test

Pressure data recorded using PANEX pressure gauges at the bottom of wells CFU31-F2 and CFU31-F3.

Freifeld, B. Lawrence Berkeley National Laboratory

Jan 21, 2015
2 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: Temperature profile

This submission includes an input file, plot file, Fortran conversion file, and 3D data file from the simulation of the temperature profile within the Test Bed #1 of the EGS Collab project. The simulation was executed with PNNL's STOMP-GT simulator, which reads the input file, and...

White, M. Pacific Northwest National Laboratory

Apr 01, 2019
6 Resources
0 Stars
Publicly accessible

Utah FORGE Wells Updated Temperature and Pressure Logs (June 2021)

This dataset includes updated temperature and pressure logs for Utah FORGE wells 56-32, 78-32, and 58-32. This data was acquired in June 2021.

Stout, F. Di Drill Survey Services

Jun 29, 2021
4 Resources
0 Stars
Publicly accessible

<< Previous 26 27 28 29 30 31 32 33 34 35 Next >>