Search OEDI Data

Chlorite Dissolution Rates From 25 to 275 degrees and pH 3 to 10

We have calculated a chlorite dissolution rate equation at far from equilibrium conditions by combining new data (20 experiments at high temperature) with previously published data Smith et al. 2013 and Lowson et al. 2007. All rate data (from the 127 experiments) are tabulated in...

Lawrence Livermore National Laboratory

Sep 27, 2013
2 Resources
0 Stars
Publicly accessible

Chemical, Calcium Phosphate Cements for Geothermal Wells Corrosion Protection, Bond Strength and Matrix Self-Healing

The data set shows performance of economical calcium phosphate cement (Fondu) blended with fly ash, class F (FAF) in carbon steel corrosion protection tests (corrosion rate, corrosion current and potential), bond and matrix strength, as well as matrix strength recovery after impos...

Sugama, T. Brookhaven National Laboratory

Sep 26, 2017
2 Resources
0 Stars
Publicly accessible

Washington Play Fairway Analysis Poly 3D Matlab Fault Modeling Scripts with Input Data to Create Permeability Potential Models

Matlab scripts and functions and data used to build Poly3D models and create permeability potential GIS layers for 1) Mount St. Helens seismic zone, 2) Wind River Valley, and 3) Mount Baker geothermal prospect areas located in Washington state.

Swyer, M. AltaRock Energy Inc

Feb 05, 2015
4 Resources
0 Stars
Publicly accessible

SGW paper Rheological Properties of Drilling Fluids Containing Special Additives for Geothermal Drilling Applications

The paper was presented at the 46th Workshop on Geothermal Reservoir Engineering, Stanford University, Stanford, California, February 15-17, 2021. In this study, the effectiveness of different additives was evaluated in maintaining drilling fluid rheology at HPHT(high pressure and...

Mohamed, A. et al University of Oklahoma

Jan 04, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Slide-Hold-Slide Experiments on Gneiss at Increased Temperature

Included are data from triaxial, single-inclined-fracture friction experiments. The experiments were performed with slide-hold-slide protocol on Utah FORGE gneiss at increased temperature. With a ~10 MPa normal stress, temperatures vary between experiments from room temperature u...

Eijsink, A. and Elsworth, D. Pennsylvania State University

Jul 25, 2023
24 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 58-32 Schlumberger FMI Logs DLIS and XML files

This zipped data set includes Schlumberger FMI logs DLIS and XML files from Utah FORGE deep well 58-32. These include runs 1 (2226-7550 ft) and 2 (7440-7550 ft). Run 3 (7390-7527ft) was acquired during phase 2C.

Nash, G. and Moore, J. Energy and Geoscience Institute at the University of Utah

Nov 17, 2017
4 Resources
0 Stars
Publicly accessible

Literature Data on Foam Fracturing Fluid

At the beginning of this project, the Temple team spent significant effort to collect data relevant to foam fracturing. More than 40 articles/reports were found in the open literature that reported the properties of aqueous foams under various testing conditions. The foam properti...

Thakor, V. et al Temple University

Nov 08, 2021
2 Resources
0 Stars
Publicly accessible

Seismic Analysis of Spatio-Temporal Fracture Generation During EGS Resource Development Deviatoric MT, Fracture Network, and Final Report

This submission contains 167 deviatoric moment tensor (MT) solutions for the seismicity observed two years prior and three years post start of injection activities at The Geysers Prati 32 EGS Demonstration. Also included is a statistical representation of the properties of 751 fra...

Gritto, R. et al Array Information Technology

Sep 01, 2018
3 Resources
0 Stars
Publicly accessible

Raw Pressure Data from Boise Hydrogeophysical Research Site (BHRS)

Pressure data from a phreatic aquifer was collected in the summer of 2013 during Multi-frequency Oscillatory Hydraulic Tomography pumping tests. All tests were performed at the Boise Hydrogeophysical Research Site. The data will be inverted using a fast steady-periodic adjoint-bas...

Lim, D. University of Wisconsin

Jul 17, 2013
20 Resources
0 Stars
Publicly accessible

Hydroshear Simulation Lab Test 2, Additional Data Sheets

This file contains additional data for this test (hydroshear test 3.2). In this test a sample of granite with a pre-cut (man made fracture) is confined, heated and differential stress is applied. The max temperature in this this system development test is 95C. More test details ca...

Bauer, S. Sandia National Laboratories

Aug 01, 2014
2 Resources
0 Stars
Publicly accessible

Washington Geothermal Play Fairway Analysis Technical Report

An investment of $0.7M from the Geothermal Technology Office for Phase 2 of Play Fairway Analysis in Washington State improved existing favorability models and increased model confidence. New 1:24,000-scale geological mapping, 15 detailed geophysical surveys, 2 passive seismic sur...

Steely, A. et al Washington Geological Survey

Dec 20, 2017
1 Resources
0 Stars
Publicly accessible

Effective Elastic and Neutron Capture Cross Section Calculations Corresponding to Simulated Fluid Properties from CO2 Push-Pull Simulations

The submission contains a .xls files consisting of 10 excel sheets, which contain combined list of pressure, saturation, salinity, temperature profiles from the simulation of CO2 push-pull using Brady reservoir model and the corresponding effective compressional and shear velocity...

Chugunov, N. and Altundas, B. Lawrence Berkeley National Laboratory

Mar 07, 2018
1 Resources
0 Stars
Publicly accessible

Analyzed Boise Data for Oscillatory Hydraulic Tomography

Data here has been "pre-processed" and "analyzed" from the raw data submitted to the GDR previously (raw data files found at http://gdr.openei.org/submissions/479. doi:10.15121/1176944 after 30 September 2017). First, we submit .mat files which are the "pre-processed" data (must h...

Lim, D. University of Wisconsin

Jul 01, 2015
8 Resources
0 Stars
Publicly accessible

Thermal-Hydrological-Mechanical Modelling of Stockton University Reservoir Cooling System, Fine Scale Stress Test Modelling

Mesh, properties, initial conditions, injection/withdrawal rates for modelling thermal, hydrological, and mechanical effects of fluid injection to and withdrawal from ground for Stockton University reservoir cooling system (aquifer storage cooling system), Galloway, New Jersey, fo...

Smith, J. et al Lawrence Berkeley National Laboratory

Feb 22, 2021
14 Resources
0 Stars
Publicly accessible

Community Geothermal: Final Thermal Conductivity Test Report and Data Logs Carbondale, CO

Provided here are a final thermal conductivity test report, a drilling log, and a heat rejection log from Carbondale, CO. Also attached is a report made before drilling, which contains predictions on the hydrogeologic conditions of the drill site. The forty-eight (48.9) hour in-si...

Ewbank, G. et al Clean Energy Economy for the Region (CLEER)

Oct 20, 2023
4 Resources
0 Stars
Publicly accessible

Utah FORGE: Wells 16A(78)-32 and 16B(78)-32 Extended Circulation Test Data August and September 2024

The dataset includes data collected during an extended circulation test conducted at the Utah FORGE site between August 8 and September 5, 2024. It provides uncorrected, raw digital data from the test, along with calibration information and a final report detailing the test proced...

McLennan, J. et al Energy and Geoscience Institute at the University of Utah

Oct 11, 2024
1 Resources
0 Stars
Publicly accessible

Distributed Acoustic Sensing (DAS) Data for Periodic Hydraulic Tests

California State University Long Beach evaluated hydraulic connectivity among geothermal wells using Periodic Hydraulic Testing (PHT) and Distributed Acoustic Sensing (DAS). The principal was to create a pressure signal in one well and observe the responding pressure signals in on...

Coleman, T. and Becker, M. California State University

Jul 06, 2017
35 Resources
0 Stars
Publicly accessible

Shallow (2-meter) Temperature Surveys in Colorado

Shallow temperature surveys are useful in early-stage geothermal exploration to delineate surface outflow zones, with the intent to identify the source of upwelling, usually a fault. Detailed descriptions of the 2-meter survey method and equipment design can be found in Coolbaugh ...

E., R. Flint Geothermal, LLC

Feb 01, 2012
1 Resources
0 Stars
Publicly accessible

High Temperature Chemical Sensing Tool: Preliminary pH and reference electrode test results

Project: High Temperature Chemical Sensing Tool for Distributed Mapping of Fracture Flow in EGS. Preliminary pH and reference electrode test results.

Cieslewski, G. Sandia National Laboratories

Sep 30, 2014
6 Resources
0 Stars
Publicly accessible

Analysis of downhole data from USU-1 well Leidos Technical Report

USU Camas-1 is a geothermal test well drilled in Camas Prairie, Idaho, in the Summer and Fall of 2018. The purpose of this test well was to validate Play Fairway methodologies of the Snake River Plain Play Fairway Analysis project. In this report, test data are analyzed to infer...

Garg, S. and Goranson, C. Utah State University

Dec 04, 2018
1 Resources
0 Stars
Publicly accessible

Images of Fracture Sustainability Test on Stripa Granite

Images of the Stripa Granite core before and after the fracture sustainability test. Photos of fracture faces of Stripa Granite core.

Kneafsey, T. Lawrence Berkeley National Laboratory

May 11, 2014
2 Resources
0 Stars
Publicly accessible

Microhole Test Data

Drilling results from the microhole project at the Sandia High Operating Temperature test facility. The project is seeking to help reduce the cost of exploration and monitoring of geothermal wells and formations by drilling smaller holes. The tests were part of a control algorith...

Su, J. Sandia National Laboratories

May 23, 2016
5 Resources
0 Stars
Publicly accessible

Utah FORGE: RESMAN Well 16A(78)-32 and 16B(78)-32 Stimulation and Circulation Tracer Test Results 2024

This dataset contains tracer test results from stimulation and circulation experiments conducted on the Utah FORGE wells 16A(78)-32 and 16B(78)-32 during 2024. The data was collected by RESMAN Energy Technology and includes detailed tracer analysis from flowback, short and extende...

Hartvig, S. et al RESMAN Energy Technology

Jan 14, 2025
1 Resources
0 Stars
Publicly accessible

SiC Diode Test Data

Fabricated SiC diodes are tested in the temperature range of 300 degrees C to 600 degrees C.

Gilbert, G. Sandia National Laboratories

Aug 01, 2014
1 Resources
0 Stars
Publicly accessible

USU Camas-1 Test Well: Documentation

This submission contains documents that describe the USU Camas-1 test well, drilled in Camas Prairie, Idaho, in Fall 2018 and Fall 2019. The purpose of this well is to validate exploration methodologies of the Snake River Plain (SRP) Play Fairway Analysis (PFA) project.

Shervais, J. Utah State University

Oct 31, 2018
13 Resources
0 Stars
Publicly accessible

<< Previous 1 2 3 4 5 6 7 8 Next >>