Search OEDI Data

NREL MOIS Data for NWEI Azura August 2015

NREL Modular Ocean Instrumentation System (MOIS) data files for the Azura grid-connected deployment at the 30-meter berth of the US Navy's Wave Energy Test Site (WETS 30m Site) at the Kaneohe Marine Corps Base Hawaii (MCBH) on the windward (northeast) coast of the island of Oahu, ...

Nelson, E. National Renewable Energy Laboratory

May 23, 2016
17 Resources
0 Stars
Publicly accessible

NREL MOIS Data for NWEI Azura June 2016

NREL Modular Ocean Instrumentation System (MOIS) data files for the Azura grid-connected deployment at the 30-meter berth of the US Navys Wave Energy Test Site (WETS 30m Site) at the Kaneohe Marine Corps Base Hawaii (MCBH) on the windward (northeast) coast of the island of Oahu, H...

Nelson, E. National Renewable Energy Laboratory

Jun 30, 2016
16 Resources
0 Stars
Publicly accessible

Wave Tank Testing Report for Controls Validation of a Heaving Point Absorber

The core objectives of this project is to improve the power capture of three different wave energy conversion (WEC) devices by more than 50% using an advanced control system and validate the attained improvements using wave tank and full scale testing. In parallel, we will bring a...

Previsic, M. et al Re Vision Consulting

Aug 26, 2020
3 Resources
0 Stars
Publicly accessible

Coupling Subsurface and Above-Surface Models for Optimizing the Design of Borefields and District Heating and Cooling Systems

Accurate dynamic energy simulation is important for the design and sizing of district heating and cooling systems with geothermal heat exchange for seasonal energy storage. Current modeling approaches in building and district energy simulation tools typically consider heat conduct...

Hu, J. et al Lawrence Berkeley National Laboratory

Jan 31, 2022
10 Resources
0 Stars
Publicly accessible

Analogue Experimental Observations of Fluid-Filled Fracture Dynamics for Geological System

Bubble cavitation in fluid filled fractures and bubble gas at the fracture tip open fractures with different fracture tips.

Cao, H. National Renewable Energy Laboratory

Feb 05, 2020
1 Resources
0 Stars
In curation

Devices Suitable for Sectional Isolation Along Both Cased and Open-hole Wellbores Materials Testing Report

The main goal of this project is to develop an annular isolation system capable to withstand geothermal downhole conditions and mitigate the problems experienced by conventional packers in FORGE wells. This materials testing report is based on thermoplastic and elastomeric materia...

Teodoriu, C. et al Welltec

Nov 08, 2022
2 Resources
0 Stars
Publicly accessible

Direct-Drive Electrical Generator and PTO System for Flap-type Wave Energy Converters

Project and generator specifications and initial prototype test data for flap-type wave energy converters (WEC)

Englebretson, S. ABB Inc.

Mar 20, 2015
2 Resources
0 Stars
Publicly accessible

Utah FORGE UGS Interactive Geoscience Map

This is a link to the Utah Geological Survey's Utah FORGE Interactive Geoscience Map. The map layers include information on geology, geography, subsurface temperatures, seismicity, gravity and groundwater. Instructions for using the interactive map and a legend for the interactive...

Hill, J. Utah Geological Survey

Jan 01, 2021
1 Resources
0 Stars
Publicly accessible

Sup3rWind Data (CONUS)

This data contains paired European Centre for Medium-Range Weather Forecasts Reanalysis version 5 (ERA5) and the Wind Integration National Dataset Toolkit (WTK) images for 2007 and 2010 over two regions in the US, with domain sizes ~800x800 (latitudes from 25.89 to 41.58, and long...

Sinha, S. et al National Renewable Energy Lab NREL

Jul 16, 2024
6 Resources
0 Stars
Curated

Liquine thermal springs

Chemical and isotopical data of the thermal springs located at Liquine area in Southern Chile.

Taucare, M. National Renewable Energy Laboratory

Sep 01, 2018
1 Resources
0 Stars
In curation

CO2 Push-Pull Single Fault Injection Simulations

ASCII text files containing grid-block name, X-Y-Z location, and multiple parameters from TOUGH2 simulation output of CO2 injection into an idealized single fault representing a dipping normal fault at the Desert Peak geothermal field (readable by GMS). The fault is composed of a ...

Borgia, A. et al Lawrence Berkeley National Laboratory

Sep 21, 2017
5 Resources
0 Stars
Publicly accessible

Crude Oil Analysis (COA) database

The Crude Oil Analysis (COA) database contains the digital data compilation of 9,076 crude oil analyses from samples collected from 1920 through 1983 from the United States and around the world and analyzed by the United States Bureau of Mines (National Institute for Petroleum and...

Lillis, P. and DOE, N. National Renewable Energy Laboratory

May 29, 2019
2 Resources
0 Stars
In curation

Dynamically Downscaled Hourly Future Weather Data with 12-km Resolution Covering Most of North America

This is an hourly future weather dataset for energy modeling applications. The dataset is primarily based on the output of a regional climate model (RCM), i.e., the Weather Research and Forecasting (WRF) model version 3.3.1. The WRF simulations are driven by the output of a genera...

Zeng, Z. et al Argonne National Laboratory

Oct 03, 2023
4 Resources
0 Stars
Curated

Thermal-Hydrological-Mechanical Modelling of Stockton University Reservoir Cooling System, Large Scale Grid

Mesh, properties, initial conditions, injection/withdrawal rates for modeling thermal, hydrological, and mechanical effects of fluid injection to and withdrawal from ground for Stockton University reservoir cooling system (aquifer storage cooling system), Galloway, New Jersey, on ...

Smith, J. et al Lawrence Berkeley National Laboratory

Feb 26, 2021
15 Resources
0 Stars
Publicly accessible

3D Model of the San Emidio Geothermal Area

The San Emidio geothermal system is characterized by a left-step in a west-dipping normal fault system that bounds the western side of the Lake Range. The 3D geologic model consists of 5 geologic units and 55 faults. Overlying Jurrassic-Triassic metasedimentary basement is a ~500 ...

E., J. University of Nevada

Dec 31, 2013
1 Resources
0 Stars
Publicly accessible

Annual Average Modeled Wind Speed for Puerto Rico and the Virgin Islands at a 100 Meter Hub Height

This is supplemental data to the 50 m height data set that was validated by NREL and wind energy meteorological consultants in 2007. The data is not suitable for micro-siting potential development projects. This shapefile was generated from a raster dataset with a 200 m spatial re...

Heimiller, D. National Renewable Energy Laboratory

Nov 25, 2014
2 Resources
0 Stars
In curation

Annual Average Modeled Wind Speed (m/s) for Puerto Rico and the Virgin Islands at a 70 Meter Hub Height.

Heimiller, D. National Renewable Energy Laboratory

Nov 25, 2014
2 Resources
0 Stars
In curation

Monitoring of Double-Stud Wall Moisture Conditions in the Northeast

BSC TO5 Task 2.2 Monitoring of Double Stud Wall Moisture Conditions in the Northeast Field test data available for wood moisture contents, temperature, and relative humidity. STRUCTURE House Devens, MA 01432 Three double-stud assemblies were compared: 12-in. ocSPF, 12-in. cellulo...

Ueno, K. Building Science Corporation

Apr 27, 2016
2 Resources
0 Stars
Publicly accessible

Spooling control design for flight optimization of tethered tidal kites

This submission includes three peer-reviewed (under review) papers from the researchers at North Carolina State University presenting different control-based techniques to maximize the efficiency and robustness of a tethered energy-harvesting kite. Below are the abstracts of each ...

Daniels, J. et al North Carolina State University

Sep 16, 2019
3 Resources
0 Stars
Publicly accessible

GeoVision: Harnessing the Heat Beneath Our Feet Analysis Inputs and Results

This submission includes input and results data from analysis done as part of the Geothermal Technology Office's Geothermal Vision Study (GeoVision). The submission includes data for both analysis of the electricity sector and the heating and cooling sector. For the electricity se...

Geothermal Technologies Office, U. National Renewable Energy Laboratory

Sep 30, 2019
16 Resources
0 Stars
Publicly accessible

GEOTHERM Data Set

GEOTHERM is a comprehensive system of public databases and software used to store, locate, and evaluate information on the geology, geochemistry, and hydrology of geothermal systems. Three main databases address the general characteristics of geothermal wells and fields, and the c...

Bliss, J. and Rapport, A. United States Geological Survey

Apr 29, 1983
2 Resources
0 Stars
Publicly accessible

Favorable Geochemistry from Springs and Wells in Colorado

This layer contains favorable geochemistry for high-temperature geothermal systems, as interpreted by Richard "Rick" Zehner. The data is compiled from the data obtained from the USGS. The original data set combines 15,622 samples collected in the State of Colorado from several sou...

E., R. Flint Geothermal, LLC

Feb 01, 2012
1 Resources
0 Stars
Publicly accessible

Structural Data for the Columbus Salt Marsh Geothermal Area GIS Data

Shapefiles and spreadsheets of structural data, including attitudes of faults and strata and slip orientations of faults. Detailed geologic mapping of ~30 km2 was completed in the vicinity of the Columbus Marsh geothermal field to obtain critical structural data that would elucid...

E., J. University of Nevada

Dec 31, 2011
1 Resources
0 Stars
Publicly accessible

Geothermal Exploration of Newberry Volcano, Oregon Summary Report

Abstract: Davenport Newberry (Davenport) has completed 8 years of exploration for geothermal energy on Newberry Volcano in central Oregon. Two deep exploration test wells were drilled by Davenport on the west flank of the volcano, one intersected a hydrothermal system; the other ...

Waibel, A. et al Southern Methodist University

Jan 01, 2015
1 Resources
0 Stars
Publicly accessible

Geothermal Thermoelectric Generation (G-TEG) with Integrated Temperature Driven Membrane Distillation and Novel Manganese Oxide for Lithium Extraction Final Report

This project aims to develop an innovative Geothermal ThermoElectric Generation (G-TEG) system specially designed to both generate electricity and extract high-value lithium (Li) from low-temperature geothermal brines. The process combined five modular technologies including silic...

Renew, J. et al Southern Research Institute

Mar 01, 2018
1 Resources
0 Stars
Publicly accessible

<< Previous 11 12 13 14 15 16 17 18 19 20 Next >>