"Womp Womp! Your browser does not support canvas :'("

CalWave WEC Open Water Demonstration - Public Final Test Report

Publicly accessible License 

The objective of this project is to advance the Technology Readiness Level of the x1 Wave Energy Converter (WEC) developed by CalWave Power
Technologies Inc. through advanced numerical simulations, dynamic hardware tests, and ultimately a scaled open water demonstration deployment. Key outcomes include deployment and operation of the demonstration unit at an open water site which replicates full scale ocean conditions, and performance and load measurements which are used to validate the high techno-economic performance of the full-scale device.

This report briefly describes the x1's final system design but, as a final test report, mainly focuses on the open water testing. For further description of the WEC system the reader is referred to CalWave's system content models, which will become publicly available at the end of 2027. The full version of this Final Test Report will become available on 8/10/2028.

This WEC pilot project was done at Scripps in San Diego, California, USA.

Citation Formats

TY - DATA AB - The objective of this project is to advance the Technology Readiness Level of the x1 Wave Energy Converter (WEC) developed by CalWave Power Technologies Inc. through advanced numerical simulations, dynamic hardware tests, and ultimately a scaled open water demonstration deployment. Key outcomes include deployment and operation of the demonstration unit at an open water site which replicates full scale ocean conditions, and performance and load measurements which are used to validate the high techno-economic performance of the full-scale device. This report briefly describes the x1's final system design but, as a final test report, mainly focuses on the open water testing. For further description of the WEC system the reader is referred to CalWave's system content models, which will become publicly available at the end of 2027. The full version of this Final Test Report will become available on 8/10/2028. This WEC pilot project was done at Scripps in San Diego, California, USA. AU - Boerner, Thomas A2 - Kojimoto, Nigel A3 - Petcovic, Dan A4 - Lehmann, Marcus DB - Open Energy Data Initiative (OEDI) DP - Open EI | National Renewable Energy Laboratory DO - KW - MHK KW - Marine KW - Hydrokinetic KW - energy KW - power KW - wave KW - wave power KW - WEC KW - pilot KW - San Diego KW - pressure differential KW - wave energy converter KW - technology KW - Scripps Institute of Oceanography KW - CalWave KW - advanced load management mechanisms KW - absorber variable geometry KW - submergence depth control KW - processed data LA - English DA - 2022/11/30 PY - 2022 PB - CalWave Power Technologies Inc. T1 - CalWave WEC Open Water Demonstration - Public Final Test Report UR - https://data.openei.org/submissions/8068 ER -
Export Citation to RIS
Boerner, Thomas, et al. CalWave WEC Open Water Demonstration - Public Final Test Report . CalWave Power Technologies Inc., 30 November, 2022, MHKDR. https://mhkdr.openei.org/submissions/500.
Boerner, T., Kojimoto, N., Petcovic, D., & Lehmann, M. (2022). CalWave WEC Open Water Demonstration - Public Final Test Report . [Data set]. MHKDR. CalWave Power Technologies Inc.. https://mhkdr.openei.org/submissions/500
Boerner, Thomas, Nigel Kojimoto, Dan Petcovic, and Marcus Lehmann. CalWave WEC Open Water Demonstration - Public Final Test Report . CalWave Power Technologies Inc., November, 30, 2022. Distributed by MHKDR. https://mhkdr.openei.org/submissions/500
@misc{OEDI_Dataset_8068, title = {CalWave WEC Open Water Demonstration - Public Final Test Report }, author = {Boerner, Thomas and Kojimoto, Nigel and Petcovic, Dan and Lehmann, Marcus}, abstractNote = {The objective of this project is to advance the Technology Readiness Level of the x1 Wave Energy Converter (WEC) developed by CalWave Power
Technologies Inc. through advanced numerical simulations, dynamic hardware tests, and ultimately a scaled open water demonstration deployment. Key outcomes include deployment and operation of the demonstration unit at an open water site which replicates full scale ocean conditions, and performance and load measurements which are used to validate the high techno-economic performance of the full-scale device.

This report briefly describes the x1's final system design but, as a final test report, mainly focuses on the open water testing. For further description of the WEC system the reader is referred to CalWave's system content models, which will become publicly available at the end of 2027. The full version of this Final Test Report will become available on 8/10/2028.

This WEC pilot project was done at Scripps in San Diego, California, USA.}, url = {https://mhkdr.openei.org/submissions/500}, year = {2022}, howpublished = {MHKDR, CalWave Power Technologies Inc., https://mhkdr.openei.org/submissions/500}, note = {Accessed: 2025-05-07} }

Details

Data from Nov 30, 2022

Last updated Nov 4, 2024

Submitted Aug 9, 2023

Organization

CalWave Power Technologies Inc.

Contact

Thomas Boerner

510.717.6254

Authors

Thomas Boerner

CalWave Power Technologies Inc.

Nigel Kojimoto

CalWave Power Technologies Inc.

Dan Petcovic

CalWave Power Technologies Inc.

Marcus Lehmann

CalWave Power Technologies Inc.

DOE Project Details

Project Name CalWave Open Water Demonstration

Project Lead Yana Shininger

Project Number EE0008097

Share

Submission Downloads