Search OEDI Data

A Thermal-Hydrological-Chemical Model for the EGS Demonstration Project at Newberry Volcano, OR

Newberry Volcano in Central Oregon is the site of a Department of Energy funded Enhanced Geothermal System (EGS) Demonstration Project. Stimulation and production of an EGS is a strong perturbation to the physical and chemical environment, giving rise to coupled Thermal-Hydrologic...

Sonnenthal, E. et al National Energy Technology Laboratory

Jan 30, 2012
1 Resources
0 Stars
Publicly accessible

HT Flash and Tantalum Capacitor Report

Pushing the boundaries with geothermal tool development can often necessitate exceeding manufacturer specifications for temperature and pressure of individual circuit components. Detailed here are the efforts surrounding geothermal temperature characterization of commercially avai...

Cashion, A. and Cieslewski, G. Sandia National Laboratories

Oct 28, 2015
1 Resources
0 Stars
Publicly accessible

Maui Gravity and Soil Gas Surveys

Contains a ground-based gravity survey of South Maui and a series of soil CO2 flux and temperature surveys encompassing Maui and the Big Island. The gravity survey was collected from approximately 284 km2 and consisted of 400 gravity stations with 400 m spacing. Locations were de...

Akerley, J. Ormat Nevada Inc

Apr 01, 2010
2 Resources
0 Stars
Publicly accessible

Utah FORGE 2-2439v2: Reports on Stress Prediction and Modeling for Well 16B(78)-32 May 2025

These two reports from the University of Pittsburgh document related efforts under Utah FORGE Project 2-2439v2 to estimate in-situ stresses in well 16B(78)-32 using laboratory data, machine learning models, and physics-based simulations. One report focuses on developing and valida...

Lu, G. et al University of Pittsburgh

Jun 05, 2025
2 Resources
0 Stars
Publicly accessible

Utah FORGE 2-2439v2: Report on Predicting Far-Field Stresses Using Finite Element Modeling and Near-Wellbore Machine Learning for Well 16A(78)-32

This report presents the far-field stress predictions at two locations along the vertical section of Utah FORGE Well 16A (78)-32 using a physics-based thermo-poro-mechanical model. Three principal stresses in far-field were obtained by solving an inverse problem based on the near-...

Lu, G. et al University of Pittsburgh

Aug 30, 2024
2 Resources
0 Stars
Publicly accessible

Utah FORGE 5-2565: Evolution of Permeability and Strength Recovery of Shear Fractures Under Hydrothermal Conditions 2024 Annual Workshop Presentation

This is a presentation on the Evolution of Permeability and Strength Recovery of Shear Fractures Under Hydrothermal Conditions by United States Geological Survey, presented by Tamara Jeppson. This video slide presentation, by the USGS, discusses the determination of how thermal, ...

Jeppson, T. et al Energy and Geoscience Institute at the University of Utah

Sep 15, 2024
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Evaluation of Potential Geochemical Responses to Injection in the FORGE Geothermal Reservoir

Plugging of fracture porosity from mineral precipitation due to injecting cold water into a a geothermal reservoir can impact the overall permeability of the fracture network in the reservoir. This can have serious ramifications on the efficiency of the geothermal resource. Geoche...

Patil, V. and Simmons, S. Energy and Geoscience Institute at the University of Utah

Apr 03, 2019
1 Resources
0 Stars
Publicly accessible

Alternative Geothermal Power Production Scenarios

The information given in this file pertains to Argonne life-cycle analyses (LCAs) of the plant cycle stage for a set of ten new geothermal scenario pairs, each comprised of a reference and improved case. These analyses were conducted to compare environmental performances among the...

Sullivan, J. Argonne National Laboratory

Mar 14, 2014
1 Resources
0 Stars
Publicly accessible

Thermal-Hydrological-Mechanical Modelling of Stockton University Reservoir Cooling System, Fine Scale Stress Test Modelling

Mesh, properties, initial conditions, injection/withdrawal rates for modelling thermal, hydrological, and mechanical effects of fluid injection to and withdrawal from ground for Stockton University reservoir cooling system (aquifer storage cooling system), Galloway, New Jersey, fo...

Smith, J. et al Lawrence Berkeley National Laboratory

Feb 22, 2021
14 Resources
0 Stars
Publicly accessible

McGee Mountain Geoprobe Study, Humboldt County, Nevada

Geoprobes were developed by the environmental industry to collect water, gas and soil samples from contaminated sites at shallow depths (10-40 meters), with a minimum of environmental disturbance. A modified Geoprobe was used to collect bottom hole temperatures, and attempt to col...

Tullar, K. Geothermal Technical Partners, Inc.

Jun 19, 2010
3 Resources
0 Stars
Publicly accessible

Thermal-Hydrological-Mechanical Modelling of Stockton University Reservoir Cooling System, Large Scale Grid

Mesh, properties, initial conditions, injection/withdrawal rates for modeling thermal, hydrological, and mechanical effects of fluid injection to and withdrawal from ground for Stockton University reservoir cooling system (aquifer storage cooling system), Galloway, New Jersey, on ...

Smith, J. et al Lawrence Berkeley National Laboratory

Feb 26, 2021
15 Resources
0 Stars
Publicly accessible

Geocellular model of St. Peter Sandstone for University of Illinois at Urbana-Champaign DDU Feasibility Study

The geocellular model of the St. Peter Sandstone was constructed for the University of Illinois at Urbana-Champaign DDU feasibility study. Starting with the initial area of review (18.0 km by 18.1 km [11.2 miles by 11.3 miles]) the boundaries of the model were trimmed down to 9.7 ...

Damico, J. University of Illinois

Dec 31, 2018
5 Resources
0 Stars
Publicly accessible

Geocellular Model of Mt. Simon Sandstone for University of Illinois at Urbana-Champaign DDU feasibility study

The geocellular model of the Mt. Simon Sandstone was constructed for the University of Illinois at Urbana-Champaign DDU feasibility study. Starting with the initial area of review (18.0 km by 18.1 km [11.2 miles by 11.3 miles]) the boundaries of the model were trimmed down to 9.7 ...

Damico, J. University of Illinois

Dec 31, 2018
4 Resources
0 Stars
Publicly accessible

Stability of Elastomers Subjected to Geothermal Well-Like Conditions

The aim of this study is to understand how commercially available elastomers perform under geothermal well-like conditions and make recommendations to the community based on these results. This poster highlights the mechanical performance of several elastomers (including EPDM, Vit...

Redline, E. et al Sandia National Laboratories

Aug 10, 2014
1 Resources
0 Stars
Publicly accessible

Practices Maintain Straight Hole in Crooked Hole Conditions, While Also Enabling Significant Gains in Drill Rate

Bottom hole assembly (BHA) designs were assessed in field trials for their ability to achieve critical low inclination requirements, while simultaneously enabling high drill rates. Because angle has historically been controlled by reducing weight on bit (WOB), these are often com...

Knudsen, S. et al Sandia National Laboratories

Apr 30, 2014
2 Resources
0 Stars
Publicly accessible

Laboratory Evaluation of EGS Shear Stimulation-Test 001

This is the results of an initial setup-shakedon test in order to develop the plumbing system for this test design. a cylinder of granite with offset holes was jacketed and subjected to confining pressure and low temperature (85C) and pore water pressure. Flow through the sample w...

Bauer, S. Sandia National Laboratories

Jul 29, 2014
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Laboratory Experiments Examining the Effect of Thermal and Mechanical Processes on Hydraulic Transmissivity Evolution

Using laboratory slide-hold-slide experiments, at temperatures from 22 to 200 degrees C, to examine effects of fracture reactivation and quasi-static loading on the evolution of fluid transport properties of simulated fractures in Westerly granite. At all temperatures, the in-plan...

Lockner, D. et al United States Geological Survey

Apr 03, 2023
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16A(78)-32 Stimulation DFN Fracture Plane Evaluation and Data

This dataset includes files used to fit planar fractures through the preliminary earthquake catalogs of the three stages of the April 2022 well 16A(78)-32 stimulation which is linked bellow. These planar features have been used to update the FORGE reference Discrete Fracture Netwo...

Finnila, A. WSP Golder

Oct 27, 2022
3 Resources
0 Stars
Publicly accessible

New River Geothermal Exploration (Ram Power Inc.)

The New River Geothermal Exploration (DOE Award No. EE0002843) is located approximately 25km south of the Salton Sea, near town of Brawley in Imperial County and approximately 150km east of San Diego, California. A total of 182 MT Logger sites were completed covering the two sepa...

Mirza, R. and Data, E. Ram Power, Inc.

Nov 15, 2013
20 Resources
0 Stars
Publicly accessible

Geothermal Technologies Program GETEM and LCOE Improvements Review (March 21, 2013)

This file was a report submitted to GTO by Mark Paster, a consultant to the GETEM project, to outline the improvements that were made between summer 2011 and spring 2013. The report focuses on six areas of model improvement: (1) Site Specific Cost Variability; (2) Consistency wi...

Paster, M. Idaho National Laboratory

Mar 21, 2013
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 58-32 Injection Test Data

This submission contains pressure and flow time series data from the reservoir testing of Well 58-32. These activities were part of the Utah FORGE Phase 2B site suitability confirmatory testing.

Podgorney, R. and McLennan, J. Idaho National Laboratory

Dec 07, 2018
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Documentation on Discrete Fracture Network and Fracture Propagation Modelling

This dataset includes reports and a slide presentation on discrete fracture network (DFN) generation and hydraulic fracture modeling at the Utah FORGE site. It details the characterization of natural fractures using well log and core data, as well as stochastic modeling techniques...

Sharma, M. and Cao, M. University of Texas

Feb 07, 2023
1 Resources
0 Stars
Publicly accessible

Low-Temperature Geothermal Geospatial Datasets: An Example from Alaska

This project is a component of a broader effort focused on geothermal heating and cooling (GHC) with the aim of illustrating the numerous benefits of incorporating GHC and geothermal heat exchange (GHX) into community energy planning and national decarbonization strategies. To bet...

Davalos Elizondo, E. et al National Renewable Energy Laboratory

Feb 06, 2023
6 Resources
0 Stars
Publicly accessible

Resource Analysis for Deep Direct-Use Feasibility Study in East Texas, Part 2

The National Renewable Energy Laboratory, Southern Methodist University Geothermal Laboratory, Eastman Chemical, Turbine Air Systems, and the Electric Power Research Institute are evaluating the feasibility of using geothermal heat to improve the efficiency of natural gas power pl...

Richards, M. et al Southern Methodist University

Mar 01, 2019
6 Resources
0 Stars
Publicly accessible

Federal Energy Management Program

FEMP EISA 432 Compliance Tracking System (CTS) enables the public to analyze and generate custom reports of CTS facility level data. This data warehouse includes only non-restricted CTS data. The data warehouse consists of five data sets (or "data cubes") that may be used to build...

Temper, C. and (EERE), O. Office of Energy Efficiency & Renewable Energy

Nov 25, 2014
1 Resources
0 Stars
In curation

<< Previous 1 2 3 4 5 6 Next >>