Search OEDI Data

ALFA Coupled Computational Fluid Dynamics/Discrete Element Method Modeling System

The HDIS/COUPi discrete element method modeling system was used to simulate the interaction between various debris and the Research Debris Diversion Platform (RDDP)

DUVOY, P. University of Alaska Fairbanks

Nov 29, 2016
11 Resources
0 Stars
Publicly accessible

Centipod WEC, Advanced Controls, Final Technical Report

Final Technical Report for "Advanced Controls for the Multi-pod Centipod WEC device" describing project parameters, organization, task activities, accomplishments, and conclusions. See other submissions under this DOE project for economic viability, design geometry, and modeling.

McCall, A. Dehlsen Associates, LLC

Feb 15, 2016
1 Resources
0 Stars
Publicly accessible

City and County Energy Profiles

The City and County Energy Profiles lookup table provides modeled electricity and natural gas consumption and expenditures, on-road vehicle fuel consumption, vehicle miles traveled, and associated emissions for each U.S. city and county. Please note this data is modeled and more p...

Day, M. National Renewable Energy Laboratory

Dec 20, 2019
5 Resources
1 Stars
Publicly accessible

ResStock: Annual Baseline Results with Component Loads

The ResStock Analysis Tool was developed by NREL with support from the U.S. Department of Energy to provide a new approach to large-scale residential analysis by combining large public and private data sources, statistical sampling, detailed sub hourly building simulations, and hi...

Speake, A. et al National Renewable Energy Lab

Mar 03, 2023
6 Resources
0 Stars
Publicly accessible

City and County Commercial Building Inventories

The Commercial Building Inventories provide modeled data on commercial building type, vintage, and area for each U.S. city and county. Please note this data is modeled and more precise data may be available through county assessors or other sources. Commercial building stock data ...

Day, M. et al National Renewable Energy Laboratory

Apr 01, 2020
9 Resources
1 Stars
Publicly accessible

TEAMER: Numerical Modeling of WECs to Support OES Task 10

This submission contains the files for reproducing the waves only and sphere test article simulations for the experimental setup (three different wave conditions) associated with the Teamer Request for Technical Support 9 (RFTS 9) fluid dynamics simulations to support the Ocean En...

Meuris, B. et al Sandia National Laboratories

Sep 23, 2024
4 Resources
0 Stars
Publicly accessible

USWAN Model Hindcast East Coast Regional Model (ECoRM)

Summary tables and plots of six International Electrotechnical Commission (IEC) wave parameters, including time series, scatter plots, and tables summarizing model performance.

Neary, V. Sandia National Laboratories

Sep 29, 2017
2 Resources
0 Stars
Publicly accessible

Photovoltaic System Pricing Trends: Historical, Recent, and Near-Term Projections 2015 Edition

This is the fourth edition in an annual briefing prepared jointly by LBNL and NREL intended to provide a high-level overview of historical, recent, and projected near-term PV system pricing trends in the United States. The briefing draws on several ongoing research activities at t...

Feldman, D. et al National Renewable Energy Laboratory

May 12, 2016
1 Resources
0 Stars
Publicly accessible

A Harmonized Geospatial Dataset of U.S. Transmission Lines: Linking FERC Form 1 and HIFLD, 1994-2024

The United States high-voltage transmission network is described by two major public data sources that have never been systematically linked at the line level: FERC Form~1, which reports annual financial, cost, and engineering attributes for individual transmission lines, and the ...

Yin, R. et al Lawrence Berkeley National Laboratory

Aug 03, 2026
1 Resources
0 Stars
Publicly accessible

Utah FORGE 2-2439v2: A Multi-Component Approach to Characterizing In-Situ Stress 2025 Workshop Presentation

This is a presentation on A Multi-Component Approach to Characterizing In-Situ Stress at the U.S DOE FORGE EGS Site: Laboratory, Modeling and Field Measurement project by University of Pittsburgh, presented by Dr. Andrew Bunger. The project's objective was to characterize stress i...

Bunger, A. University of Pittsburgh

Sep 18, 2025
3 Resources
0 Stars
Publicly accessible

Utah FORGE 9-3706: Designing, Characterizing and Optimizing Proppant and Flow Monitoring Materials 2025 Workshop Presentation

This is a presentation on Designing, Characterizing & Optimizing Proppant & Flow Monitoring Materials for a Utah FORGE Engineered Geothermal System by Oklahoma State University, presented by Dr. Mileva Radonjic. This video slide presentation discusses enhanced proppant coatings, z...

Radonjic, M. Oklahoma State University

Sep 18, 2025
3 Resources
0 Stars
Publicly accessible

The Use of 3D Geologic Modeling to Improve Well Targeting in Glass Buttes, Oregon

The Glass Buttes Project includes combining a suite of high-resolution geophysical and geochemical techniques to reduce exploration risk by characterizing hydrothermal alteration, fault geometries and relationships. This is aided through geologic observation, modern remote sensing...

Walsh, P. Ormat Nevada Inc

Oct 09, 2011
1 Resources
0 Stars
Publicly accessible

TEAMER: Advanced Wave-to-Wire OWC model in WEC-Sim

Accurate numerical models are crucial for the development of wave energy converter (WEC) technologies, providing the means for power production and lifetime assessment, site selection, and design of mooring lines, PTO systems and controllers, among other aspects. This project aims...

Peñalba, M. et al Mondragon Goi Eskola Politeknikoa

Dec 20, 2024
6 Resources
0 Stars
Publicly accessible

kISMET Final Report and Highlights

The files in this submission describes the results of a series of stress measurement and hydraulic fracturing experiments conducted at the Sanford Underground Research Facility (SURF) in Lead, SD. This report describes the accomplishments of the kISMET (permeability (k) and Induce...

Oldenburg, C. et al Lawrence Berkeley National Laboratory

Oct 31, 2016
2 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: TOUGH2-CSM Simulation of Embedded Natural Fractures and Chemical Tracer Transport and Sorption

The EGS Collab SIGMA-V project is a multi-lab and university collaborative research project that is being undertaken at the Sanford Underground Research Facility (SURF) in South Dakota. The project consists of studying stimulation, fluid-flow, and heat transfer processes at a scal...

Johnston, B. et al National Renewable Energy Laboratory

Jun 07, 2019
4 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2535: Compilation of Geodetic Data and Estimation of Associated Deformation

Report on possible geodetic signature of the 3 stimulations in April 2022 as well as a comparison with existing InSAR data gathered over the site before, during, and after the stimulation. In geothermal production it is important to understand the existing stress field and the cha...

Vasco, D. et al Lawrence Berkeley National Laboratory

Apr 29, 2022
4 Resources
0 Stars
Publicly accessible

Bias Corrected NOAA HRRR Wind Resource Data for Grid Integration Applications

To address the need for regularly updated wind resource data, NREL has processed the High-Resolution Rapid Refresh (HRRR) outputs for use in grid integration modeling. The HRRR is an hourly-updated operational forecast product produced by the National Oceanic and Atmospheric Admin...

Buster, G. et al National Renewable Energy Lab (NREL)

Oct 15, 2024
7 Resources
0 Stars
Publicly accessible

District Geothermal Energy Systems with Seasonal Underground Thermal Storage: Load Profiles, Modeling Workflow, and Techno-Economic Results for U.S. Screening

This dataset accompanies the paper "Geothermal district energy systems coupled with seasonal underground thermal energy storage: a U.S. techno-economic screening by climate and geology." It contains the data and scripts required to reproduce the study's results across ten U.S. cit...

Mello, S. et al National Laboratory of the Rockies

Sep 27, 2025
6 Resources
0 Stars
Publicly accessible

Sodar ND Scintec MFAS Wind Profiler with RASS, Rufus Raw Data

**Overview** The data provide vertical mean profiles of wind and temperature. **Data Details** * Data averaged over an interval of 30 minutes. * Time stamp is included in each data file. * Location: John Day/Rufus Water Treatment Plant (45.690842,-120.745751). * Site Elevat...

Fernando, J. et al Wind Energy Technologies Office (WETO)

Dec 01, 2015
1 Resources
0 Stars
Publicly accessible

Sodar NREL Scintec MFAS Wind Profiler, Decker Ranch Airstrip Raw Data

**Overview** The dataset includes 15-minute average wind speed and direction records from 30 m to 330 m above ground level (AGL) in 10-m range gates. Data were collected by a Scintec MFAS wind profiler installed at the Decker Ranch in Oregon, about 4.4 km southeast of Kent, Ore.,...

Jager, D. and Scott, G. Wind Energy Technologies Office (WETO)

Oct 27, 2015
1 Resources
0 Stars
Publicly accessible

Sodar NREL Scintec MFAS Wind Profiler, Decker Ranch Airstrip Reviewed Data

Jager, D. and Scott, G. Wind Energy Technologies Office (WETO)

Nov 19, 2015
1 Resources
0 Stars
Publicly accessible

U.S. Solar Photovoltaic BESS System Cost Benchmark Q1 2020 Report

NREL has been modeling U.S. solar photovoltaic (PV) system costs since 2009. This year, our report benchmarks costs of U.S. PV for residential, commercial, and utility-scale systems, with and without storage, built in the first quarter of 2020 (Q1 2020). The methodology includes b...

Feldman, D. et al National Renewable Energy Laboratory

Jan 26, 2021
1 Resources
0 Stars
Publicly accessible

Optimization of Marine Energy Conversion Systems Through Modeling, Optimization, and CHIL Validation

The work aims to achieve optimal tidal energy conversion through a comprehensive approach of modeling, optimization, and control hardware-in-the-loop (CHIL) validation. By developing accurate models and employing optimization techniques, it seeks to identify efficient system confi...

Luo, F. et al Stony Brook University

Jul 17, 2023
6 Resources
0 Stars
Publicly accessible

Techno-Economic Simulation Results Using dGeo for EGS-Based District Heating in the Northeastern United States

This dataset presents the results of techno-economic simulations performed using the Distributed Geothermal Market Demand Model (dGeo) to evaluate the feasibility of Enhanced Geothermal Systems (EGS)-based district heating in the Northeastern United States. Developed by the Nation...

Pauling, H. National Renewable Energy Laboratory

Sep 30, 2024
2 Resources
0 Stars
Publicly accessible

MASK4 Test Campaign for Sandia WaveBot Device Dataset

This data and report details the findings from a wave tank test focused on production of useful work of a wave energy converter (WEC) device. The experimental system and test were specifically designed to validate models for power transmission throughout the WEC system. Additional...

Forbush, D. et al Sandia National Laboratories

Dec 25, 2023
5 Resources
0 Stars
Publicly accessible

<< Previous 5 6 7 8 9 10 11 12 13 14 Next >>