Search OEDI Data

Showing results 151 - 175 of 233.
Show results per page.
Order by:
Available Now:
Clear All Filters ×
Research Areas
Accessibility
Data Type
Organization
Source
"reservoir engineering"×
Geothermal Data Repository (GDR)×

Fully Coupled Geomechanics and Discrete Flow Network Modeling of Hydraulic Fracturing for Geothermal Applications

The primary objective of our current research is to develop a computational test bed for evaluating borehole techniques to enhance fluid flow and heat transfer in enhanced geothermal systems (EGS). Simulating processes resulting in hydraulic fracturing and/or the remobilization of...
Fu, P. et al Lawrence Livermore National Laboratory
Jan 01, 2011
2 Resources
0 Stars
Publicly accessible

A Class III Cultural Resources Inventory of Proposed Roads and Drill Pads for the McGee Mountain Geothermal Project, Humboldt County, Nevada

From July 20th to July 22nd, 2010, Chambers Group personnel conducted a cultural resources inventory of the project area. The recordation and inventory resulted in the recordation a single newly identified prehistoric site (CrNV-2-9605) and five isolated finds (CrNV-2-1490 to 1494...
Zehner, R. Geothermal Technical Partners, Inc.
Aug 10, 2010
1 Resources
0 Stars
Publicly accessible

Preliminary Analysis of Stress in the Newberry EGS Well NWG 55-29

As part of the planning for stimulation of the Newberry Volcano Enhanced Geothermal Systems (EGS) Demonstration project in Oregon, a high-resolution borehole televiewer (BHTV) log was acquired using the ALT ABI85 BHTV tool in the slightly deviated NWG 55-29 well. The image log rev...
Davatzes, N. and Hickman, S. National Energy Technology Laboratory
Jan 01, 2011
1 Resources
0 Stars
Publicly accessible

Water chemistry data and calculations for Fracture Sustainability Tests

Measured cation, anion, and silica are presented as well as calculations evaluating mass balance performed for 4 fracture sustainability tests under EGS conditions: Stripa granite, Metamudstone, Rhyolitic Ashflow Tuff, and Silicified Rhyolitic Tuff. Calculations of charge balance ...
Kneafsey, T. et al Lawrence Berkeley National Laboratory
Sep 30, 2020
2 Resources
0 Stars
Publicly accessible

Utah FORGE Phase 3 Native State Model: 2022 Update

This is the Phase 3 native state model update. The Phase 3 numerical model represents a significant subsurface volume below the FORGE site footprint. The model domain of 4.0 km x 4.0 km x 4.2 km is located approximately between depths of 4000 to 4200 meters below land surface. Thi...
Podgorney, R. and Liu, R. Idaho National Laboratory
Jul 29, 2022
1 Resources
0 Stars
Publicly accessible

Reactive Transport Simulations of High-Tempertature Geologic Thermal Energy Storage (GeoTES) in Deep Saline Formations I/O Files

Simulation input and output files, post-processed figures and excel tables, and tecplot layout files for generating figures. These simulations were run with TOUGHREACT V4.12 by Lawrence Berkeley National Laboratory in 2021. This work was completed as part of the geologic thermal e...
Spycher, N. and Doughty, C. Lawrence Berkeley National Laboratory
Dec 31, 2021
2 Resources
0 Stars
Publicly accessible

Hawthorne Nevada Deep Direct-Use Feasibility Study 3D Geologic Model

The objective of this project is to use a multi-disciplinary, three-tiered approach to assess the geothermal resource and determine the feasibility of implementing a large-scale, direct-use facility for the Hawthorne Army Depot (HAD) and the various town and county facilities in H...
Lowry, T. Nevada Bureau of Mines and Geology
Mar 29, 2018
3 Resources
0 Stars
Publicly accessible

University of Illinois Campus Deep Direct-Use Feasibility Study Geocellular Modeling

This submission includes 3-D geocellular model files with formation top and formation thickness data for the St. Peter and Mt. Simon Sandstones in University of Illinois Deep Direct-Use project area. An input parameters file is also included for the St. Peter Sandstone.
Damico, J. University of Illinois
May 07, 2018
5 Resources
0 Stars
Publicly accessible

Assessing REE Concentrations in Geothermal and Oil and Gas Produced Waters: A Potential Domestic Source of Strategic Mineral Commodities

The project team collected and analyzed 224 water samples and 101 matching rock samples. INL's improved method of measuring aqueous REEs allows study of samples previously thought too volume limited to measure. The study found that aqueous REEs occur at trace levels in all analyz...
Quillinan, S. et al University of Wyoming
Mar 08, 2019
1 Resources
0 Stars
Publicly accessible

Altona Field Lab Inverse Model WRR 2020

Includes data for measured inert tracer breakthrough curves first reported in Hawkins (2020) (Water Resources Research). In addition, this submission includes the production well temperature measurements first reported in Hawkins et al. (2017a) (Water Resources Research, volume 53...
Tester, J. Cornell University
Jan 01, 2015
3 Resources
0 Stars
Publicly accessible

Utah FORGE: Development of Multi-Stage Fracturing System and Wellbore Tractor to Enable Zonal Isolation During Stimulation and EGS Operations in Horizontal Wellbores

This paper discusses the progress on a project funded by the DOE Utah FORGE (Frontier Observatory for Research in Geothermal Energy) for the development of a subsurface heat exchanger for Enhanced Geothermal Systems (EGS) using unique casing sleeves cemented in place and are used ...
Fleckenstein, W. et al Colorado School of Mines
Oct 05, 2022
1 Resources
0 Stars
Publicly accessible

S-Layer Nanosheet Binding of Zn and Gd

This data characterizes binding of Zn2+ and Gd3+ to engineered nanosheets at 40C and in a brine solution. The engineered nanosheets are composed of surface-layer (S-layer) proteins which form 2 D crystalline sheets and display Zn2+ or Gd3+-binding domains on these sheets. Their ab...
Ajo-Franklin, C. et al Lawrence Berkeley National Laboratory
Apr 15, 2016
2 Resources
0 Stars
Publicly accessible

Structural Inventory of Great Basin Geothermal Systems and Definition of Favorable Structural Settings

Structural controls of 426 geothermal systems in the Great Basin region including western Nevada, central Nevada, northwestern Nevada, northeastern Nevada, east-central Nevada, eastern California, southern Oregon, and western Utah were analyzed with literature research, air photos...
Faulds, J. University of Nevada
Dec 31, 2013
1 Resources
0 Stars
Publicly accessible

Geocellular model of St. Peter Sandstone for University of Illinois at Urbana-Champaign DDU Feasibility Study

The geocellular model of the St. Peter Sandstone was constructed for the University of Illinois at Urbana-Champaign DDU feasibility study. Starting with the initial area of review (18.0 km by 18.1 km [11.2 miles by 11.3 miles]) the boundaries of the model were trimmed down to 9.7 ...
Damico, J. University of Illinois
Dec 31, 2018
5 Resources
0 Stars
Publicly accessible

Geocellular Model of Mt. Simon Sandstone for University of Illinois at Urbana-Champaign DDU feasibility study

The geocellular model of the Mt. Simon Sandstone was constructed for the University of Illinois at Urbana-Champaign DDU feasibility study. Starting with the initial area of review (18.0 km by 18.1 km [11.2 miles by 11.3 miles]) the boundaries of the model were trimmed down to 9.7 ...
Damico, J. University of Illinois
Dec 31, 2018
4 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 58-32 Stimulation Conference Paper and Data

The U.S. Department of Energy's (U.S. DOE) Frontier Observatory for Research in Geothermal Energy (FORGE) is a field laboratory that provides a unique opportunity to develop and test new technologies for characterizing, creating and sustaining Enhanced Geothermal Systems (EGS) in ...
Best, S. Energy and Geoscience Institute at the University of Utah
Apr 24, 2019
2 Resources
0 Stars
Publicly accessible

Development of a Downhole Tracer and pH Measurement Instrument for Application in Geothermal Wells

Due the high temperature and pressure conditions found in geothermal wells, tracer studies designed to elucidate properties of geothermal reservoirs are traditionally conducted by pulling liquid samples from the wellhead. These samples are then sent off for analysis in a fixed lab...
Hess, R. et al Sandia National Laboratories
Sep 11, 2013
1 Resources
0 Stars
Publicly accessible

Newberry FORGE: 3D Gravity Density Model for Newberry Volcano

These data are Pacific Northwest National Lab inversions of an amalgamation of two surface gravity datasets: Davenport-Newberry gravity collected prior to 2012 stimulations and Zonge International gravity collected for the project "Novel use of 4D Monitoring Techniques to Improve...
Bonneville, A. Pacific Northwest National Laboratory
Mar 11, 2016
1 Resources
0 Stars
Publicly accessible

Newberry Caldera Conceptual Geologic Model

Conceptual model for the Newberry Caldera geothermal area. Model is centered around caldera and evaluates geologic information in tandem with some geophysical datasets to derive a conceptual subsurface model. Includes: Geologic information from the USGS geologic map of Newberry...
Moser, M. et al National Energy Technology Laboratory
Mar 04, 2016
1 Resources
0 Stars
Publicly accessible

Hawthorne Nevada Deep Direct-Use Feasibility Study References, Reports, Literature

The objective of this project is to use a multi-disciplinary, three-tiered approach to assess the geothermal resource and determine the feasibility of implementing a large-scale, direct-use facility for the Hawthorne Army Depot (HAD) and the various town and county facilities in H...
Lowry, T. Nevada Bureau of Mines and Geology
Mar 29, 2018
3 Resources
0 Stars
Publicly accessible

Utah FORGE: Drilling Data for Student Competition

Diagnostic drilling data (Pason log files) from Well 58-32 (previously labeled MU-ESW1), which was drilled near Milford Utah during Phase 2B of the FORGE Project to confirm geothermal reservoir characteristics met requirements for the final FORGE site. This dataset includes both ...
Podgorney, R. et al Idaho National Laboratory
Dec 07, 2018
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Data for 3-D Model Development Lithology, Temperature, Pressure, and Stress

This submission comprises two downloadable .zip archives. Each archive contains spreadsheets with 3-D data and a .txt document describing the data. The Mesh Files .zip download contains data regarding the lithologic contacts of the granitoid and overlying sedimentary basin fill. T...
Podgorney, R. Idaho National Laboratory
Mar 17, 2020
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16A(78)-32 Planned Trajectory

This submission includes an Excel spreadsheet containing the Utah FORGE deep well 16A(78)-32 planned trajectory including UTM coordinates, elevations, and depths from the well head to the toe. This proposed new injection well is expected to descend vertically to a depth of approxi...
Podgorney, R. and Nash, G. Idaho National Laboratory
Mar 24, 2020
1 Resources
0 Stars
Publicly accessible

Dataset and SUTRA model used to evaluate Reservoirs for Thermal Energy Storage in the Portland Basin, Oregon.

This is a link to the open access, published dataset and modeling that supports a feasibility study of Reservoir Thermal Energy Storage (RTES) in the Portland Basin, Oregon, USA. Citation: Burns, E.R., 2020, SUTRA model used to evaluate Saline or Brackish Aquifers as Reservoirs f...
Bershaw, J. et al Portland State University
Jun 29, 2020
2 Resources
0 Stars
Publicly accessible

Simulating Complex Fracture Systems in Geothermal Reservoirs Using an Explicitly Coupled Hydro-Geomechanical Model

Low permeability geothermal reservoirs can be stimulated by hydraulic fracturing to create Enhanced (or Engineered) Geothermal Systems (EGS) with higher permeability and improved heat transfer to increase heat production. In this paper, we document our effort to develop a numerica...
Carrigan, C. et al Lawrence Livermore National Laboratory
Jan 01, 2011
2 Resources
0 Stars
Publicly accessible
<< Previous2345678910Next >>