Search OEDI Data

Showing results 101 - 125 of 1016.
Show results per page.
Order by:
Available Now:
Research Areas
Accessibility
Data Type
Organization
Source
"60-1 ratio"×

Model and experimental validation of ocean kite dynamics and controls

This submission includes two peer-reviewed papers from researchers at North Carolina State University presenting the modeling and lab-scale experimentation of the dynamics and control of a tethered tidal ocean kite. Below are the abstracts of each file included in the submission. ...
Vermillion, C. et al North Carolina State University
Mar 01, 2020
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Stress Logging Data

This spreadsheet consist of data and graphs from deep well 58-32 stress testing from 6900 7500 ft depth. Measured stress data were used to correct logging predictions of in situ stress. Stress plots shows pore pressure (measured during the injection testing), the total vertical in...
McLennan, J. Energy and Geoscience Institute at the University of Utah
Mar 14, 2018
1 Resources
0 Stars
Publicly accessible

Greenbuilt Construction Energy Efficiency Retrofit House Demonstration Sacramento

One of the homes that was part of Sacramento Municipal Utility District's (SMUD) Energy Efficiency Retrofit Demonstration (EERD) project was a 1980's era home in Fair Oaks, California, referred to as the Greenbuilt house, as Greenbuilt Construction completed the retrofit of the h...
Sparn, B. et al Mountain Energy Partnership
Aug 27, 2018
8 Resources
0 Stars
Publicly accessible

Slip and Dilation Tendency Analysis of the Patua Geothermal Area

Critically stressed fault segments have a relatively high likelihood of acting as fluid flow conduits (Sibson, 1994). As such, the tendency of a fault segment to slip or to dilate provides an indication of which faults or fault segments within a geothermal system are critically st...
E., J. University of Nevada
Dec 31, 2013
1 Resources
0 Stars
Publicly accessible

Unified Field Study 1 (UFS-1)

The Unified Field Studies (UFS), established by the Algae Testbed Public-Private Partnership (ATP3), produced data on the effect of environmental and process conditions on algal growth rates and algal composition. The goal of the UFS-1 experiment, performed October to December 201...
Wolfrum, E. et al National Renewable Energy Laboratory
Sep 27, 2016
16 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 58-32 Core Analyses

This dataset contains final reports regarding stress measurements, permeability measurements, and mechanical properties from the core testing of well 58-32, in PDF format, and spreadsheets containing tables from the reports as part of Utah FORGE Phase 2B. Please refer to the repor...
McLennan, J. Energy and Geoscience Institute at the University of Utah
May 30, 2018
1 Resources
0 Stars
Publicly accessible

AeroDyn V15.04: Design Tool for Wind and MHK Turbines

AeroDyn is a time-domain wind and MHK turbine aerodynamics module that can be coupled into the FAST version 8 multi-physics engineering tool to enable aero-elastic simulation of horizontal-axis wind turbines. AeroDyn V15.04 has been updated to include a cavitation check for MHK tu...
Murray, R. et al National Renewable Energy Laboratory
Apr 28, 2017
1 Resources
0 Stars
Publicly accessible

Chemical, Calcium Phosphate Cements for Geothermal Wells Corrosion Protection, Bond Strength and Matrix Self-Healing

The data set shows performance of economical calcium phosphate cement (Fondu) blended with fly ash, class F (FAF) in carbon steel corrosion protection tests (corrosion rate, corrosion current and potential), bond and matrix strength, as well as matrix strength recovery after impos...
Sugama, T. Brookhaven National Laboratory
Sep 26, 2017
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16A(78)-32 Planned Trajectory

This submission includes an Excel spreadsheet containing the Utah FORGE deep well 16A(78)-32 planned trajectory including UTM coordinates, elevations, and depths from the well head to the toe. This proposed new injection well is expected to descend vertically to a depth of approxi...
Podgorney, R. and Nash, G. Idaho National Laboratory
Mar 24, 2020
1 Resources
0 Stars
Publicly accessible

Fallon FORGE: Distinct Element Reservoir Modeling

Archive containing input/output data for distinct element reservoir modeling for Fallon FORGE. Models created using 3DEC, InSite, and in-house Python algorithms (ITASCA). List of archived files follows; please see 'Modeling Metadata.pdf' (included as a resource below) for addition...
Blankenship, D. et al Sandia National Laboratories
Mar 12, 2018
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Fault Reactivation Through Fluid Injection Induced Seismicity Laboratory Experiments

Included are results from shear reactivation experiments on laboratory faults pre-loaded close to failure and reactivated by the injection of fluid into the fault. The sample comprises a single-inclined-fracture (SIF) transecting a cylindrical sample of Westerly granite. All expe...
Yu, J. et al Pennsylvania State University
Jul 01, 2023
27 Resources
0 Stars
Publicly accessible

TEAMER: FOSWEC Mooring Modeling and Analysis, Post Access Report and Data

Floating oscillating surge wave energy converters (FOSWECs) offer several advantages over bottom-hinged oscillating surge wave energy converters, including large wave potential at deep-water sites with fewer permitting and environmental concerns outside territorial waters. As a te...
Housner, S. et al Virginia Tech
Jun 14, 2022
10 Resources
0 Stars
Publicly accessible

Adsorption Heat Pump Coatings Investigation

In this study, a theoretical investigation was made to predict the performances of zeolite Y and SAPO-34 coatings for an adsorption cooling system operated by waste heat, under various conditions. A mathematical model developed and tested previously for coatings of A and X type ze...
Tatlier, M. Istanbul Technical University
May 22, 2020
2 Resources
0 Stars
Publicly accessible

Battery Inverter Experimental Data

The increase in power electronic based generation sources require accurate modeling of inverters. Accurate modeling requires experimental data over wider operation range. We used 30 kW off-the-shelf grid following battery inverter in the experiments. We used controllable AC supply...
Prabakar. . et al National Renewable Energy Laboratory
Jan 06, 2023
2 Resources
0 Stars
Publicly accessible

PV Inverter Experimental Dataset Version 2 with 100 Percent Power

The increase in power electronic based generation sources require accurate modeling of inverters. Accurate modeling requires experimental data over wider operation range. We used 20 kW off-the-shelf grid following PV inverter in the experiments. We used controllable AC supply and ...
Prabakar. . et al National Renewable Energy Laboratory
Nov 10, 2023
2 Resources
0 Stars
Publicly accessible

PV Inverter Experimental Data

The increase in power electronic based generation sources require accurate modeling of inverters. Accurate modeling requires experimental data over wider operation range. We used 20 kW off-the-shelf grid following PV inverter in the experiments. We used controllable AC supply and ...
Prabakar. . et al National Renewable Energy Laboratory
Jan 06, 2023
2 Resources
0 Stars
Publicly accessible

Split Phase Inverter Data

The increase in power electronic based generation sources require accurate modeling of inverters. Accurate modeling requires experimental data over wider operation range. We used 8.35 kW off-the-shelf grid following split phase PV inverter in the experiments. We used controllable ...
Prabakar. . et al National Renewable Energy Laboratory
Mar 23, 2023
2 Resources
0 Stars
Publicly accessible

Analysis of Joist Masonry Moisture Content Monitoring

BSC TO5 Task 7.2 Analysis of Joist Masonry Moisture Content Monitoring House Lawrence, MA 01840 This work involved the field monitoring of embedded wood joist ends in a solid brick building in zone 5A that was retrofitted with interior insulation. Eleven joists throughout the bui...
Ueno, K. Building Science Corporation
Apr 27, 2016
3 Resources
0 Stars
Publicly accessible

Geocellular Model of Mt. Simon Sandstone for University of Illinois at Urbana-Champaign DDU feasibility study

The geocellular model of the Mt. Simon Sandstone was constructed for the University of Illinois at Urbana-Champaign DDU feasibility study. Starting with the initial area of review (18.0 km by 18.1 km [11.2 miles by 11.3 miles]) the boundaries of the model were trimmed down to 9.7 ...
Damico, J. University of Illinois
Dec 31, 2018
4 Resources
0 Stars
Publicly accessible

Unified Field Study 5 (UFS-5)

The Unified Field Studies (UFS), established by the Algae Testbed Public-Private Partnership (ATP3), produced data on the effect of environmental and process conditions on algal growth rates and algal composition. The goal of the fifth Unified Field Study (UFS-5), performed Decemb...
Wolfrum, E. et al National Renewable Energy Laboratory
Sep 27, 2016
24 Resources
0 Stars
Publicly accessible

Unified Field Study 3 (UFS-3)

The Unified Field Studies (UFS), established by the Algae Testbed Public-Private Partnership (ATP3), produced data on the effect of environmental and process conditions on algal growth rates and algal composition. The goal of the third Unified Field Study (UFS-3), performed June t...
Wolfrum, E. et al National Renewable Energy Laboratory
Sep 29, 2016
24 Resources
0 Stars
Publicly accessible

Unified Field Study 4 (UFS-4)

The Unified Field Studies (UFS), established by the Algae Testbed Public-Private Partnership (ATP3), produced data on the effect of environmental and process conditions on algal growth rates and algal composition. The goal of the fourth Unified Field Study (UFS-4), performed Septe...
Wolfrum, E. et al National Renewable Energy Laboratory
Sep 27, 2016
24 Resources
0 Stars
Publicly accessible

Unified Field Study 6 (UFS-6)

The Unified Field Studies (UFS), established by the Algae Testbed Public-Private Partnership (ATP3), produced data on the effect of environmental and process conditions on algal growth rates and algal composition. The goal of the sixth Unified Field Study (UFS-6), performed March ...
Wolfrum, E. et al National Renewable Energy Laboratory
Oct 20, 2017
24 Resources
0 Stars
Publicly accessible

Mapping and Assessment of the United States Ocean Wave Energy Resource

This project estimates the naturally available and technically recoverable U.S. wave energy resources, using a 51-month Wavewatch III hindcast database developed especially for this study by National Oceanographic and Atmospheric Administration's (NOAA's) National Centers for Envi...
EPRI, . et al Electric Power Research Institute
Dec 05, 2011
2 Resources
0 Stars
In curation

UAE6 Wind Tunnel Tests Data UAE6 Sequence P Raw Data

**Overview** Sequence P: Wake Flow Visualization, Upwind (P) This test sequence used an upwind, rigid turbine with a 0° cone angle. The wind speed ranged from 5 m/s to 15 m/s. Yaw angles of 0° to –60° were achieved. The blade tip pitch was 3°. The rotor rotated at 72 RPM. ...
Fingersh, L. Wind Energy Technologies Office (WETO)
Nov 28, 2018
1 Resources
0 Stars
Publicly accessible
<< Previous123456789Next >>