Search OEDI Data

GEO3D Three-Dimensional Computer Model of a Ground Source Heat Pump System

This file is the setup file for GEO3D, a computer program written by Jim Menart to simulate vertical wells in conjunction with a heat pump for ground source heat pump (GSHP) systems. This is a very detailed three-dimensional computer model. This program produces detailed heat tran...

Menart, J. Wright State University

Jun 07, 2013
3 Resources
0 Stars
Publicly accessible

TEAMER: MADWEC Techno-Economic Analysis

The objective of this project was for the facility to conduct a techno-economic assessment (TEA) of the Maximal Asymmetric Drag Wave Energy Converter (MADWEC), developed by the University of Massachusetts Dartmouth (UMass Dartmouth). MADWEC is used for powering remote monitoring a...

Ortega, T. and Baca, E. National Renewable Energy Laboratory

Mar 08, 2024
2 Resources
0 Stars
Publicly accessible

StingRAY Structural Optimization Final Technical Report

The overall project objective is to materially decrease the leveled cost of energy (LCOE) of the Columbia Power (CPower) StingRAY utility-scale wave energy converter (WEC). This will be achieved by reducing structural material and manufacturing costs and increasing energy output. ...

Lenee-Bluhm, P. Columbia Power Technologies, Inc.

Aug 05, 2020
2 Resources
0 Stars
Publicly accessible

H3 StingRAY Final Design and Technical Report

The goal of this Project was to develop a standards-compliant, fabrication-ready design of Columbia Power Technologies' (C-Power) next-generation wave energy converter (WEC), the StingRAY H3. The H3 is a design iteration of C-Power's StingRAY WEC and is intended for electrical pow...

Prudell, J. and Lenee-Bluhm, P. Columbia Power Technologies, Inc.

Sep 15, 2023
2 Resources
0 Stars
Publicly accessible

TEAMER: Public Initial Optimization of a Vessel-mounted Removable Current Energy Converter

This project focuses on developing a numerical tool to estimate the Levelized Cost of Energy (LCOE) for vessel-mounted hydrokinetic turbines. By leveraging open-source software and public-domain data, the tool evaluates energy capture and costs for deploying turbines on vessels in...

Forbush, D. et al Sandia National Laboratories

Jul 31, 2024
4 Resources
0 Stars
Publicly accessible

TEAMER: Modeling of Wave Energy Converter-augmented Ocergy Offshore Platform Immediate Release Report

In this project, using the MATLAB/Simulink tool, WEC-Sim, initial simulations were performed of Ocergy's offshore data platform, the OCG-Data, to study the feasibility of augmenting this platform with several wave energy converters (WECs) affixed to platform structure. A target of...

Tom, N. et al Ocergy, Inc

Mar 03, 2026
2 Resources
0 Stars
Publicly accessible

Transient Data Library of Solar Grid Integrated Distributed System

This submission contains an open-source library of transient events in distributed system with high solar PV. The library includes the collected data, related documents and scripts for loading the data. The data library is built for transient event detection and machine learning b...

Kuruganti, T. and Dong, Y. Oak Ridge National Laboratory

Nov 10, 2022
3 Resources
0 Stars
Publicly accessible

PacWave Site Observations

The PacWave Site Observations submission contains raw and near-real-time meteorological and oceanic measurements at the PacWave wave energy test site. PacWave is an open-ocean testing facility operated by Oregon State University, located off the coast of Newport, Oregon. The test ...

Hembrough, B. et al Oregon State University

Jan 01, 2020
4 Resources
0 Stars
Publicly accessible

DASH Slow Strain Rates from Brady Hot Springs Geothermal Field during PoroTomo Deployment Period

This submission contains slow strain rates summed to radians over 30 second intervals [rad/s] derived from horizontal distributed acoustic sensing measurements (DASH) of Brady geothermal field during PoroTomo deployment (2016-Mar-14 to 2016-Mar-26). There is one file correspondin...

Reinisch, E. et al University of Wisconsin

Jun 27, 2018
20 Resources
0 Stars
Publicly accessible

Physical and Numerical Modeling Open Source Files and Datasets for 1:6 Scale Reference Model 2 (RM2) Cross-Flow Turbine

This submission includes Github links to open source files and data sets, including the numerical model, CACTUS, input files, source code and output files, CAD files of the 1:6 scale model DOE's RM2 cross-flow turbine, power performance data and wake flow measurements from the 1:6...

Neary, V. Sandia National Laboratories

Jun 30, 2015
3 Resources
0 Stars
Publicly accessible

Turbine Lander Deployment in Sequim Bay (2023-2024): Optical and Sonar Records of Animal Interactions

This dataset contains environmental monitoring data collected during the deployment of the Turbine Lander, a small-scale vertical-axis, cross-flow turbine (1.19 m x 0.85 m) in the inlet to Sequim Bay, Washington. The turbine was deployed for 141 days between October 2023 and March...

Bassett, C. and Cotter, E. University of Washington Applied Physics Laboratory

Mar 07, 2024
6 Resources
0 Stars
Publicly accessible

Laboratory Upgrade Point Absorber (LUPA) CAD Files

The Laboratory Upgrade Point Absorber (LUPA) is an open-source wave energy converter designed and tested by Oregon State University. The computer-aided design (CAD) files are provided here in two forms: the original SOLIDWORKS (2021) model as "LUPA SOLIDWORKS.zip" and as a STEP fi...

Beringer, C. et al Oregon State University

Nov 04, 2024
7 Resources
0 Stars
Publicly accessible

Techno-Economic Analysis of AquaHarmonics Wave Energy Converter Using SAM: Baseline and Optimized LCOE Estimates

This dataset presents techno-economic modeling results for the AquaHarmonics Wave Energy Converter (WEC), analyzing both baseline and optimized system configurations using the National Renewable Energy Laboratory's System Advisor Model (SAM). The models incorporate empirical perfo...

Hagmüller, A. et al AquaHarmonics, Inc.

Jun 24, 2025
5 Resources
0 Stars
Publicly accessible

Phased Retrofits in Existing Homes in Florida Phase I: Shallow and Deep Retrofits

The U.S. Department of Energy's Building America research team Building America Partnership for Improved Residential Construction is collaborating with Florida Power & Light (FPL) to conduct a phased residential energy-efficiency retrofit program. This research seeks to establish ...

Beal, D. et al University of Central Florida Florida Solar Energy Center

Apr 27, 2016
10 Resources
0 Stars
Publicly accessible

RANS Simulation RRF of Single Lab-Scaled DOE RM1 MHK Turbine

Attached are the .cas and .dat files for the Reynolds Averaged Navier-Stokes (RANS) simulation of a single lab-scaled DOE RM1 turbine implemented in ANSYS FLUENT CFD-package. The lab-scaled DOE RM1 is a re-design geometry, based of the full scale DOE RM1 design, producing same p...

Javaherchi, T. et al University of Washington

Apr 15, 2014
3 Resources
0 Stars
Publicly accessible

AlphaBuilding Synthetic Buildings Operation Dataset

This is a synthetic building operation dataset which includes HVAC, lighting, miscellaneous electric loads (MELs) system operating conditions, occupant counts, environmental parameters, end-use and whole-building energy consumptions at 10-minute intervals. The data is created with...

Li, H. et al Lawrence Berkeley National Laboratory

Dec 21, 2020
5 Resources
0 Stars
Publicly accessible

NREL Solar Radiation Research Laboratory (SRRL): Baseline Measurement System (BMS), Golden, Colorado

The Solar Radiation Research Laboratory (SRRL) was established at the Solar Energy Research Institute (now NREL) in 1981 to provide continuous measurements of the solar resources, outdoor calibrations of pyranometers and pyrheliometers, and to characterize commercially available i...

Stoffel, T. and Andreas, A. National Renewable Energy Laboratory

May 04, 2015
2 Resources
0 Stars
Publicly accessible

UNH TDP Voltsys Raw Data and Processing Scripts Fall 2021

This submission contains raw Voltsys rectifier data and processing scripts associated with MHKDR submission 394 (UNH TDP Concurrent Measurements of Inflow, Power Performance, and Loads for a Grid-Synchronized Vertical Axis Cross-Flow Turbine Operating in a Tidal Estuary, DOI: 10.1...

Bharath, A. et al National Renewable Energy Laboratory

Dec 21, 2021
4 Resources
0 Stars
Publicly accessible

PoroTomo: BRAD and BRDY GPS Station RINEX Files December 20, 2014

This dataset provides links to daily RINEX files for two GPS stations at Brady's Hot Springs as of December 20, 2014. The data is formatted as compressed GNSS RINEX observation files and is accessible through CSV files containing metadata such as file size, data type, and publicat...

Kreemer, C. University of Nevada

Dec 20, 2014
4 Resources
0 Stars
Publicly accessible

University of Illinois Campus Deep Direct-Use Feasibility Study Geological Characterization of the Mt. Simon Sandstone

These studies undertook detailed analyses of the Mt. Simon Sandstone in the Illinois Basin for geological storage and sequestration, and brine extraction.

Lin, Y. et al University of Illinois

Mar 30, 2018
5 Resources
0 Stars
Publicly accessible

Gradient-Based Optimization Framework for Mass Distribution of Floating Wave Energy Converter Hulls

This MATLAB suite optimizes the internal mass distribution and inertial properties of floating wave energy converter (WEC) hulls. The gradient-based framework employs Sequential Quadratic Programming (SQP) to tune uncoupled natural frequencies in heave and/or pitch towards resonan...

Kotzamanis, V. and Kalliontzis, D. University of Houston

May 01, 2026
7 Resources
0 Stars
Publicly accessible

Sample IEEE123 Bus system for OEDI SI

Time series load and PV data from an IEEE123 bus system. An example electrical system, named the OEDI SI feeder, is used to test the workflow in a co-simulation. The system used is the IEEE123 test system, which is a well studied test system (see link below to IEEE PES Test Feeder...

Elgindy, T. and Balasubramaniam, K. National Renewable Energy Laboratory

Sep 01, 2022
4 Resources
0 Stars
Publicly accessible

TEAMER: Supporting model output files for Environmental Compliance Framework for Floating Tidal Turbines, Cook Inlet, AK

Orbital Marine Power (Orbital) is seeking to deploy their floating tidal technology in US waters and has considered the possibility of deploying in temperate waters including the Pacific Northwest (PNW) and the Western Passage, Maine. It has become apparent that some of the most p...

Wang, T. et al Pacific Northwest National Laboratory

Mar 01, 2023
5 Resources
0 Stars
Publicly accessible

TEAMER: Stage 2 Resource Assessment Study of Long Island Sound Tidal Resource in New York State Waters Based on Numerical Modeling Immediate Release

This dataset comprises high-resolution Finite Volume Community Ocean Model (FVCOM) hydrodynamic model output for a portion of eastern Long Island Sound (LIS) developed under a project with Verdant Power, with technical assistance from PNNL. The project applied a high fidelity nume...

Spicer, P. and Yang, Z. Pacific Northwest National Laboratory

Aug 25, 2026
2 Resources
0 Stars
Publicly accessible

Development of a Downhole Tool Measuring Real-Time Concentration of Ionic Tracers and pH in Geothermal Reservoirs

For enhanced or Engineered Geothermal Systems (EGS) geothermal brine is pumped to the surface via the production wells, the heat extracted to turn a turbine to generate electricity, and the spent brine re-injected via injection wells back underground. If designed properly, the sub...

Hess, R. et al Sandia National Laboratories

Mar 31, 2014
1 Resources
0 Stars
Publicly accessible

<< Previous 3 4 5 6 7 8 9 10 11 12 Next >>