Search OEDI Data

Focusing Wave Energy for Wave Energy Converter Applications

Wave tank tests at Stevens Institute of Technology quantified the ability of near-surface platforms to concentrate wave energy over the platform. Due to the instantaneous change in water depth, mass, energy, and power are conserved in this process. The energy and power concentrat...

Raftery, M. Stevens Institute of Technology

Aug 10, 2010
7 Resources
0 Stars
Publicly accessible

M3 Wave DMP/APEX WEC Device Configuration Drawings

Configurations as tested and modeled in final phase of project for the Delos-Reyes Morrow Pressure Device (DMP), commercialized by M3 Wave LLC as "APEX."

Morrow, M. and Delos-Reyes, M. M3 Wave

Aug 08, 2017
1 Resources
0 Stars
Publicly accessible

Conducting a 3D Converted Shear Wave Project to Reduce Exploration Risk at Wister, CA

2010 Peer Review of the 'Conducting a 3D Converted Shear Wave' Project to reduce exploration risk at Wister, CA. The presentation includes a timeline, budget, barriers, and partners. The objective of the project is also explained in the presentation.

Matlick, S. Ormat Nevada Inc

May 18, 2010
2 Resources
0 Stars
Publicly accessible

State Estimation for advanced control of wave energy converters

A report on state estimation for advanced control of wave energy converters (WECs), with supporting data models and slides from the overview presentation. The methods discussed are intended for use to enable real-time closed loop control of WECs.

Coe, R. and Bacelli, G. Sandia National Laboratories

Apr 25, 2017
6 Resources
0 Stars
Publicly accessible

Conducting a 3D Converted Shear Wave Project to reduce exploration risk at Wister, CA: Geothermal Technologies Program 2011 Peer Review

2011 Peer Review of the 'Conducting a 3D Converted Shear Wave' Project to reduce exploration risk at Wister, CA.

Matlick, S. Ormat Nevada Inc

Jun 01, 2011
1 Resources
0 Stars
Publicly accessible

Gearbox Reliability Collaborative Phase 3 Gearbox 3 Test

The GRC uses a combined gearbox testing, modeling, and analysis approach disseminating data and results to the industry and facilitating improvement of gearbox reliability. This test data describes the tests of GRC gearbox 3 in the National Wind Technology Center dynamometer and d...

Keller and WallenNational Renewable Energy Laboratory

Dec 21, 2016
18 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 2: 4100 Foot Level Elastic Property Data

Static and dynamic elastic properties (Young's modulus, Shear Modulus, P-wave Modulus, and Poisson's Ratio) of amphibolites and rhyolites from the TV4100 and TH4100 boreholes at the Sanford Underground Research Laboratory (SURF). Elastic properties include Young's modulus, Poisson...

Jahnke, B. et al Lawrence Berkeley National Laboratory

Dec 18, 2020
4 Resources
0 Stars
Publicly accessible

Utah FORGE: Stress Ratio Dependence of Ultrasonic Anisotropy in Well 16B(78)-32 Core

This dataset contains high-pressure ultrasonic measurements on a foliated granitoid core from Well 16B(78)-32 at the Utah FORGE site. Ultrasonic P-waves and two orthogonal S-waves were measured concurrently parallel and perpendicular to the rock fabric. All measurements were mad...

Lisabeth, H. and Savage, H. Lawrence Berkeley National Laboratory

Apr 07, 2025
2 Resources
0 Stars
Publicly accessible

MHK Levelized Cost of Energy (LCOE) Guidance and Techno-Economic Analysis Materials

Useful information and tools for calculating the Levelized Cost of Energy (LCOE) and MHK Cost Breakdown Structure. Includes a structure for calculating the capital expenditures and operating costs of a marine energy technology or device, reference resource data for both wave and ...

Jenne, S. and Baca, E. National Renewable Energy Laboratory

Nov 08, 2019
7 Resources
0 Stars
Publicly accessible

Self-Healing and Re-Adhering Polymer-Cements with Improved Toughness

Polymer-cement experiments were conducted in order to assess the chemical and thermal properties of various polymer-cement composites. This file set includes the following polymer-cement analyses: Polymer-Cement Composite Synthesis Polymer-Cement Interactions by Atomistic Simulat...

Fernandez, C. Pacific Northwest National Laboratory

Nov 11, 2015
10 Resources
0 Stars
Publicly accessible

Development of a Downhole Tracer and pH Measurement Instrument for Application in Geothermal Wells

Due the high temperature and pressure conditions found in geothermal wells, tracer studies designed to elucidate properties of geothermal reservoirs are traditionally conducted by pulling liquid samples from the wellhead. These samples are then sent off for analysis in a fixed lab...

Hess, R. et al Sandia National Laboratories

Sep 11, 2013
1 Resources
0 Stars
Publicly accessible

Devices Suitable for Sectional Isolation Along Both Cased and Open-hole Wellbores Geomechanical Packer Formation Model Iteraction

The main goal of this project is to develop an annular isolation system capable to withstand geothermal downhole conditions and mitigate the problems experienced by conventional packers in FORGE wells. This presentation outlines the work in rock modelling and interaction with the ...

Ghassemi, A. et al Welltec

Jun 20, 2023
2 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 2: Earth Model Datasets

The EGS Collab Project performed a series of tests to increase the understanding the response of crystalline rock mass to stimulations and fluid circulation to efficiently implement enhanced geothermal systems (EGS) technologies. The EGS Collab team created two underground testbed...

Neupane, G. et al Idaho National Laboratory

May 29, 2022
6 Resources
0 Stars
Publicly accessible

StingRAY WEC Risk Register

Risk Registers for major subsystems of the StingRAY WEC completed in compliance with the DOE Risk Management Framework developed by NREL.

Rhinefrank, K. Columbia Power Technologies, Inc.

Feb 24, 2017
18 Resources
0 Stars
Publicly accessible

Gearbox Reliability Collaborative Phase 3 Gearbox 2 Test

The National Renewable Energy Laboratory (NREL) Gearbox Reliability Collaborative (GRC) was established by the U.S. Department of Energy in 2006; its key goal is to understand the root causes of premature gearbox failures and improve their reliability. The GRC uses a combined gear...

Keller and RobbNational Renewable Energy Laboratory

May 02, 2016
17 Resources
0 Stars
Publicly accessible

Metering Best Practices Applied in the National Renewable Energy Laboratory's Research Support Facility: A Primer to the 2011 Measured and Modeled Energy Consumption Datasets

Modern buildings are complex energy systems that must be controlled for energy efficiency. The Research Support Facility (RSF) at the National Renewable Energy Laboratory (NREL) has hundreds of controllers computers that communicate with the building's various control systems to...

Sheppy. . et al National Renewable Energy Laboratory

Mar 25, 2016
4 Resources
0 Stars
Publicly accessible

Aquantis 2.5 MW Ocean Current Generation Device Design Details

Items in this submission provide the detailed design of the Aquantis Ocean Current Turbine and accompanying analysis documents, including preliminary designs, verification of design reports, CAD drawings of the hydrostatic drivetrain, a test plan and an operating conditions simula...

Banko, R. et al Dehlsen Associates, LLC

Jun 03, 2015
22 Resources
0 Stars
Publicly accessible

Understanding the Evolution of Customer Motivations and Adoption Barriers in Residential Solar Markets: Survey Data

This research focused on accelerating solar photovoltaic (PV) diffusion by collecting new market data and developing predictive modeling frameworks to test and refine understandings of household level motivations for adopting solar. Three different household-level surveys were...

Sigrin. . et al National Renewable Energy Laboratory

May 22, 2017
13 Resources
0 Stars
Publicly accessible

WISE-CASING: Surface Seismic Survey at Cymric Field, California Central Valley

This test was conducted at the Chevron Cymric oilfield in the California central valley near Bakersfield. A reflected seismic signal was observed in all three components (x, y, z) of the 3-component Episensor geophone, as well as all phones on the single component array. The arriv...

Wu, Y. et al Lawrence Berkeley National Laboratory

Apr 02, 2018
6 Resources
0 Stars
Publicly accessible

GeoVision Barriers Taskforce

This submission includes papers, presentations, and data developed during the multi-year GeoVision Barriers Taskforce effort. Developers have identified many non-technical barriers to geothermal power development, including land access, permitting, and market barriers. Included i...

Young, K. and Levine, A. National Renewable Energy Laboratory

Sep 30, 2015
5 Resources
0 Stars
Publicly accessible

ATP3 Unified Field Study Data

ATP3 Unified Field Study DataThe Algae Testbed Public-Private Partnership ATP3 was established with the goal of investigating open pond algae cultivation across different geographic climatic seasonal and operational conditions while setting the benchmark for quality data collectio...

Wolfrum. . et al National Renewable Energy Laboratory

Oct 19, 2017
17 Resources
0 Stars
Publicly accessible

Reservoir Stimulation Optimization with Operational Monitoring for Creation of EGS

EGS field projects have not sustained production at rates greater than half of what is needed for economic viability. The primary limitation that makes commercial EGS infeasible is our current inability to cost-effectively create high-permeability reservoirs from impermeable, igne...

A., C. Pacific Northwest National Laboratory

Sep 25, 2013
19 Resources
0 Stars
Publicly accessible

Newberry EGS Demonstration: Well 55-29 Stimulation Data

The Newberry Volcano EGS Demonstration in central Oregon, a 3 year project started in 2010, tests recent technological advances designed to reduce the cost of power generated by EGS in a hot, dry well (NWG 55-29) drilled in 2008. First, the stimulation pumps used were designed to ...

T., T. AltaRock Energy Inc

Dec 08, 2012
136 Resources
0 Stars
Publicly accessible