Search OEDI Data

Purdue University: Results of B-Value Tests for Rock Saturation

This dataset includes an Excel file with the results of B-value tests to determine the magnitude of the back pressure required for full saturation of Sierra White granite samples. Test were conducted on cylindrical rock specimens of Sierra White granite in a custom water pressuriz...

Han, K. et al Purdue University

Jun 20, 2022
2 Resources
0 Stars
Publicly accessible

Advanced TidGen Power System Material Set Selection

The TidGen Power System generates emission-free electricity from tidal currents and connects directly into existing grids using smart grid technology. The power system consists of three major subsystems: shore-side power electronics, mooring system, and turbine generator unit (TGU...

Marnagh, C. and McEntee, J. Ocean Renewable Power Company

Jun 14, 2018
1 Resources
0 Stars
Publicly accessible

Thermoelectric Materials Development for Low Temperature Geothermal Power Generation

Data includes characterization results for novel thermoelectric materials developed specifically for power generation from low temperature geothermal brines. Materials characterization data includes material density, thickness, resistance, Seebeck coefficient. This research was ca...

Hansen, T. Southern Research Institute

Jan 29, 2016
3 Resources
0 Stars
Publicly accessible

Material Properties for Brady Hot Springs Nevada USA from PoroTomo Project

The PoroTomo team has completed inverse modeling of the three data sets (seismology, geodesy, and hydrology) individually, as described previously. The estimated values of the material properties are registered on a three-dimensional grid with a spacing of 25 meters between nodes....

Feigl, K. and PoroTomo Team, . University of Wisconsin

Mar 06, 2019
10 Resources
0 Stars
Publicly accessible

Advanced TidGen Power System Material Characterization Program

Marnagh, C. and McEntee, J. Ocean Renewable Power Company

Jun 14, 2018
2 Resources
0 Stars
Publicly accessible

CalWave Open Water Demonstration PTO Belt Assessment & Test Report Public

PTO (Power Take-Off) belt test and analysis report conducted under CalWave's Open Water Demonstration Award EE0008097 Belt Tradeoffs for Winch PTO. The report tests two types of belts: a high modulus polyethylene (HMPE) woven fiber belt and a steel cable polyurethane belt. The goa...

Kojimoto, N. and Boerner, T. CalWave Power Technologies Inc.

May 28, 2021
1 Resources
0 Stars
Publicly accessible

Advanced TidGen Power System Composites Structural Testing

Seawater aging response was investigated in marine-grade glass/epoxy, glass/vinyl ester, carbon/epoxy and carbon/vinyl ester composites with respect to water uptake, interlaminar shear strength, flexural strength, tensile strength, and tensile fracture surface observations. The re...

Krumpe, A. ORPC Inc.

Jan 06, 2020
2 Resources
0 Stars
Publicly accessible

Utah FORGE Core Material Friction Experiments

The following folders contain 3 friction experiments on Utah FORGE core material from depths of 6735 8533ft. The experiment conditions range from 100% relative humidity at room temperature to fluid-saturated at 110C. Experiments were done on both intact samples in a single-direct ...

Marone, C. et al The Pennsylvania State University

Mar 15, 2023
7 Resources
0 Stars
Publicly accessible

COMSOL Models and Simulation Results for Closed-Loop Geothermal Systems with Thermal Enhancements

The Closed-Loop Geothermal Working Group and the National Renewable Energy Laboratory (NREL) have studied the performance of disc-shaped and linear thermal enhancements (conductive material introduced around a wellbore) in closed-loop geothermal systems. COMSOL models were develop...

Beckers, K. et al National Renewable Energy Laboratory

Dec 15, 2023
4 Resources
0 Stars
Publicly accessible

Application of Neutron Imaging to Investigate Flow through Fractures for EGS

There is an ongoing effort at Oak Ridge National Laboratory to develop a unique experimental capability for investigating flow through porous and fractured media using neutron imaging techniques. This capability is expected to support numerous areas of investigation associated wit...

Polsky, Y. et al Oak Ridge National Laboratory

Feb 01, 2013
1 Resources
0 Stars
Publicly accessible

Community Resilience through Low-Temperature Geothermal Reservoir Thermal Energy Storage

Submitted data include simulations related to underground thermal battery (UTB) simulations described in Modeling and efficiency study of large scale underground thermal battery deployment, presented at GRC, October 2021. The UTB is comprised of a tank of water, a helical heat ex...

Nico, P. et al Lawrence Berkeley National Laboratory

Jan 29, 2022
4 Resources
0 Stars
Publicly accessible

Testing LCM on a Large Scale for Geothermal Drilling Applications Using a Novel Experimental Setup

Rheology data obtained from flow loop tests, performed using different lost circulation materials (LCM) to study their effect on fluid rheology and wellbore hydraulics. The sealing performance of different LCM was tested using different fracture sizes. Five academic papers / repor...

Mohamed, A. et al University of Oklahoma

Apr 22, 2022
10 Resources
0 Stars
Publicly accessible

TEAMER: Electrically Engaged Undulation System for Unmanned Underwater Vehicles

This TEAMER RFTS 1 (Request for Technical Support) project supported the flume tank testing of a long range, high endurance unmanned underwater vehicle (UUV) to monitor maritime space. Today, battery-powered remotely operated vehicles (ROVs) lack the duration to make persistent, w...

Lu, K. and Datla, R. Pyro-E

Oct 01, 2021
4 Resources
0 Stars
Publicly accessible

Test Report for Detonation Velocity Measurements

Test report for detonation velocity measurements. A series of tests were conducted to determine reaction rate and general behavior of aluminum (AL) and magnesium (MG) powder mixtures (metalized explosives) with Bullseye double-base smokeless propellant. Given the indeterminate sen...

Grubelich, M. Sandia National Laboratories

Jan 13, 2014
1 Resources
0 Stars
Publicly accessible

Omics Standard Operating Procedures

This living document will illustrate Standard Operating Procedures (SOPs) for sampling biofilm material from reverse osmosis (RO) membrane modules. The SOPs will empower the NAWI research community to apply omics tools (e.g., time-series metagenomic, meta-transcriptomic, metaprote...

May, A. et al Oak Ridge National Laboratory

Jan 18, 2021
1 Resources
0 Stars
Publicly accessible

High-Pressure and High-Temperature (HPHT) Lost Circulation Material (LCM) Testing

High-pressure and high-temperature (HPHT) lost circulation material (LCM) rheology test results, LCM particle size distributions (PSD) analysis, and HPHT LCM fluid loss test results. Three academic papers / reports derived from this research are also presented.

Salehi, S. and Vivas, C. University of Oklahoma

Nov 30, 2021
6 Resources
0 Stars
Publicly accessible

TidGen MHK Generator Composite Fatigue Analysis Procedure

A procedure was described for performing a fatigue analysis of composite foils for an MHK generator. The steps included generating load data, S-N (Stress versus Number of cycles to failure) diagrams through fatigue testing, cycle counts, damage versus load, and cumulative damage. ...

Krumpe, A. ORPC Inc.

Apr 14, 2020
2 Resources
0 Stars
Publicly accessible

Devices Suitable for Sectional Isolation Along Both Cased and Open-hole Wellbores Materials Testing Report

The main goal of this project is to develop an annular isolation system capable to withstand geothermal downhole conditions and mitigate the problems experienced by conventional packers in FORGE wells. This materials testing report is based on thermoplastic and elastomeric materia...

Teodoriu, C. et al Welltec

Nov 08, 2022
2 Resources
0 Stars
Publicly accessible

Geomechanical Modeling for Thermal Spallation Drilling

Wells for Engineered Geothermal Systems (EGS) typically occur in conditions presenting significant challenges for conventional rotary and percussive drilling technologies: granitic rocks that reduce drilling speeds and cause substantial equipment wear. Thermal spallation drilling,...

Walsh, S. et al Lawrence Livermore National Laboratory

Aug 24, 2011
1 Resources
0 Stars
Publicly accessible

Newberry EGS Demonstration: Stimulating the Existing Fracture Network Report

The Newberry Volcano EGS Demonstration in central Oregon, a 3 year project started in 2010, tests recent technological advances designed to reduce the cost of power generated by EGS in a hot, dry well (NWG 55-29) drilled in 2008. First, the stimulation pumps used were designed to ...

Cladouhos, T. et al AltaRock Energy Inc

Mar 10, 2014
1 Resources
0 Stars
Publicly accessible

Techno-Economic Assessment for Integrating Biosorption into Rare Earth Recovery Process

The current uncertainty in the global supply of rare earth elements (REEs) necessitates the development of novel extraction technologies that utilize a variety of REE source materials. Herein, we examined the techno-economic performance of integrating a biosorption approach into a...

Jiao, Y. et al Lawrence Livermore National Laboratory

Oct 09, 2017
1 Resources
0 Stars
Publicly accessible

StingRAY Structural Optimization Final Technical Report

The overall project objective is to materially decrease the leveled cost of energy (LCOE) of the Columbia Power (CPower) StingRAY utility-scale wave energy converter (WEC). This will be achieved by reducing structural material and manufacturing costs and increasing energy output. ...

Lenee-Bluhm, P. Columbia Power Technologies, Inc.

Aug 05, 2020
2 Resources
0 Stars
Publicly accessible

Newberry EGS Demonstration: Repairing and Re-Stimulating Well 55-29 Report

The Newberry Volcano EGS Demonstration in central Oregon, a 5 year project begun in 2010, tests recent technological advances designed to reduce the cost of power generated by EGS in a hot, dry well (NWG 55-29) drilled in 2008. First, the stimulation pumps used were designed to ru...

Cladouhos, T. et al AltaRock Energy Inc

Jul 03, 2015
2 Resources
0 Stars
Publicly accessible

Utah FORGE Project 3-2417: Simulations for Distributed Acoustic Sensing Strain Signatures as an Indicator of Fracture Connectivity

This dataset encompasses simulations of strain signatures from both hydraulically connected and "near-miss" fractures in enhanced geothermal systems (EGS). The files and results are presented from the perspective of digital acoustic sensing's (DAS) potential to differentiate the t...

Ward-Baranyay, M. et al Rice University

Jan 01, 2023
4 Resources
0 Stars
Publicly accessible

Tracking the Sun

Berkeley Lab's Tracking the Sun report series is dedicated to summarizing installed prices and other trends among grid-connected, distributed solar photovoltaic (PV) systems in the United States. The present report, the 11th edition in the series, focuses on systems installed thro...

Barbose, G. and Darghouth, N. Lawrence Berkeley National Laboratory (LBNL)

Oct 01, 2019
6 Resources
1 Stars
Publicly accessible

1 2 Next >>