Search OEDI Data

Thermoelectric Materials Development for Low Temperature Geothermal Power Generation

Data includes characterization results for novel thermoelectric materials developed specifically for power generation from low temperature geothermal brines. Materials characterization data includes material density, thickness, resistance, Seebeck coefficient. This research was ca...

Hansen, T. Southern Research Institute

Jan 29, 2016
3 Resources
0 Stars
Publicly accessible

Advanced TidGen Power System Material Characterization Program

The TidGen Power System generates emission-free electricity from tidal currents and connects directly into existing grids using smart grid technology. The power system consists of three major subsystems: shore-side power electronics, mooring system, and turbine generator unit (TGU...

Marnagh, C. and McEntee, J. Ocean Renewable Power Company

Jun 14, 2018
2 Resources
0 Stars
Publicly accessible

Devices Suitable for Sectional Isolation Along Both Cased and Open-hole Wellbores Materials Testing Report

The main goal of this project is to develop an annular isolation system capable to withstand geothermal downhole conditions and mitigate the problems experienced by conventional packers in FORGE wells. This materials testing report is based on thermoplastic and elastomeric materia...

Teodoriu, C. et al Welltec

Nov 08, 2022
2 Resources
0 Stars
Publicly accessible

Omics Standard Operating Procedures

This living document will illustrate Standard Operating Procedures (SOPs) for sampling biofilm material from reverse osmosis (RO) membrane modules. The SOPs will empower the NAWI research community to apply omics tools (e.g., time-series metagenomic, meta-transcriptomic, metaprote...

May, A. et al Oak Ridge National Laboratory

Jan 18, 2021
1 Resources
0 Stars
Publicly accessible

Advanced TidGen Power System Material Set Selection

Marnagh, C. and McEntee, J. Ocean Renewable Power Company

Jun 14, 2018
1 Resources
0 Stars
Publicly accessible

Material Properties for Brady Hot Springs Nevada USA from PoroTomo Project

The PoroTomo team has completed inverse modeling of the three data sets (seismology, geodesy, and hydrology) individually, as described previously. The estimated values of the material properties are registered on a three-dimensional grid with a spacing of 25 meters between nodes....

Feigl, K. and PoroTomo Team, . University of Wisconsin

Mar 06, 2019
10 Resources
0 Stars
Publicly accessible

CalWave Open Water Demonstration PTO Belt Assessment & Test Report Public

PTO (Power Take-Off) belt test and analysis report conducted under CalWave's Open Water Demonstration Award EE0008097 Belt Tradeoffs for Winch PTO. The report tests two types of belts: a high modulus polyethylene (HMPE) woven fiber belt and a steel cable polyurethane belt. The goa...

Kojimoto, N. and Boerner, T. CalWave Power Technologies Inc.

May 28, 2021
1 Resources
0 Stars
Publicly accessible

Advanced TidGen Power System Composites Structural Testing

Seawater aging response was investigated in marine-grade glass/epoxy, glass/vinyl ester, carbon/epoxy and carbon/vinyl ester composites with respect to water uptake, interlaminar shear strength, flexural strength, tensile strength, and tensile fracture surface observations. The re...

Krumpe, A. ORPC Inc.

Jan 06, 2020
2 Resources
0 Stars
Publicly accessible

Techno-Economic Assessment for Integrating Biosorption into Rare Earth Recovery Process

The current uncertainty in the global supply of rare earth elements (REEs) necessitates the development of novel extraction technologies that utilize a variety of REE source materials. Herein, we examined the techno-economic performance of integrating a biosorption approach into a...

Jiao, Y. et al Lawrence Livermore National Laboratory

Oct 09, 2017
1 Resources
0 Stars
Publicly accessible

Utah FORGE Core Material Friction Experiments

The following folders contain 3 friction experiments on Utah FORGE core material from depths of 6735 8533ft. The experiment conditions range from 100% relative humidity at room temperature to fluid-saturated at 110C. Experiments were done on both intact samples in a single-direct ...

Marone, C. et al The Pennsylvania State University

Mar 15, 2023
7 Resources
0 Stars
Publicly accessible

Purdue University: Results of B-Value Tests for Rock Saturation

This dataset includes an Excel file with the results of B-value tests to determine the magnitude of the back pressure required for full saturation of Sierra White granite samples. Test were conducted on cylindrical rock specimens of Sierra White granite in a custom water pressuriz...

Han, K. et al Purdue University

Jun 20, 2022
2 Resources
0 Stars
Publicly accessible

Application of Neutron Imaging to Investigate Flow through Fractures for EGS

There is an ongoing effort at Oak Ridge National Laboratory to develop a unique experimental capability for investigating flow through porous and fractured media using neutron imaging techniques. This capability is expected to support numerous areas of investigation associated wit...

Polsky, Y. et al Oak Ridge National Laboratory

Feb 01, 2013
1 Resources
0 Stars
Publicly accessible

Community Resilience through Low-Temperature Geothermal Reservoir Thermal Energy Storage

Submitted data include simulations related to underground thermal battery (UTB) simulations described in Modeling and efficiency study of large scale underground thermal battery deployment, presented at GRC, October 2021. The UTB is comprised of a tank of water, a helical heat ex...

Nico, P. et al Lawrence Berkeley National Laboratory

Jan 29, 2022
4 Resources
0 Stars
Publicly accessible

Testing LCM on a Large Scale for Geothermal Drilling Applications Using a Novel Experimental Setup

Rheology data obtained from flow loop tests, performed using different lost circulation materials (LCM) to study their effect on fluid rheology and wellbore hydraulics. The sealing performance of different LCM was tested using different fracture sizes. Five academic papers / repor...

Mohamed, A. et al University of Oklahoma

Apr 22, 2022
10 Resources
0 Stars
Publicly accessible

Test Report for Detonation Velocity Measurements

Test report for detonation velocity measurements. A series of tests were conducted to determine reaction rate and general behavior of aluminum (AL) and magnesium (MG) powder mixtures (metalized explosives) with Bullseye double-base smokeless propellant. Given the indeterminate sen...

Grubelich, M. Sandia National Laboratories

Jan 13, 2014
1 Resources
0 Stars
Publicly accessible

Comparative Performance of Four Prototype Mechanical Building Cooling Systems in a Desert Climate

Data and result of approximately fifteen months of monitoring of four houses located in the desert climate of Borrego Springs, California. Four houses were constructed using identical floor plans but differing wall materials, and different cooling systems that were designed to red...

Springer, D. et al Davis Energy

Jul 20, 2016
9 Resources
0 Stars
Curated

A Conceptual Geologic Model for the Newberry Volcano EGS Site in Central Oregon: Constraining Heat Capacity and Permeability through Interpretation of Multicomponent Geosystems Data

Newberry Volcano, a voluminous (500 km3) basaltic/andesitic/rhyolitic shield volcano located near the intersection of the Cascade volcanic arc, the Oregon High Lava Plains and Brothers Fault Zone, and the northern Basin and Range Province, has been the site of geothermal explorati...

Mark-Moser, M. et al National Energy Technology Laboratory

Feb 22, 2016
1 Resources
0 Stars
Publicly accessible

High-Pressure and High-Temperature (HPHT) Lost Circulation Material (LCM) Testing

High-pressure and high-temperature (HPHT) lost circulation material (LCM) rheology test results, LCM particle size distributions (PSD) analysis, and HPHT LCM fluid loss test results. Three academic papers / reports derived from this research are also presented.

Salehi, S. and Vivas, C. University of Oklahoma

Nov 30, 2021
6 Resources
0 Stars
Publicly accessible

TidGen MHK Generator Composite Fatigue Analysis Procedure

A procedure was described for performing a fatigue analysis of composite foils for an MHK generator. The steps included generating load data, S-N (Stress versus Number of cycles to failure) diagrams through fatigue testing, cycle counts, damage versus load, and cumulative damage. ...

Krumpe, A. ORPC Inc.

Apr 14, 2020
2 Resources
0 Stars
Publicly accessible

Geomechanical Modeling for Thermal Spallation Drilling

Wells for Engineered Geothermal Systems (EGS) typically occur in conditions presenting significant challenges for conventional rotary and percussive drilling technologies: granitic rocks that reduce drilling speeds and cause substantial equipment wear. Thermal spallation drilling,...

Walsh, S. et al Lawrence Livermore National Laboratory

Aug 24, 2011
1 Resources
0 Stars
Publicly accessible

Newberry EGS Demonstration Report: Stimulating the Existing Fracture Network

The Newberry Volcano EGS Demonstration in central Oregon, a 3 year project started in 2010, tests recent technological advances designed to reduce the cost of power generated by EGS in a hot, dry well (NWG 55-29) drilled in 2008. First, the stimulation pumps used were designed to ...

Cladouhos, T. et al AltaRock Energy Inc

Mar 10, 2014
1 Resources
0 Stars
Publicly accessible

Net Shape Fabricated Low Cost MHK Pass-Through the Hub Turbine Blades with Integrated Health Management Technology

The primary objective of this project is to develop a three-blade MHK rotor with low manufacturing and maintenance costs. The proposed program will design, fabricate and test a novel half-scale low cost, net shape fabricated single piece three-blade MHK rotor with integrated healt...

Wess, D. ARL Penn State

Feb 09, 2016
24 Resources
0 Stars
Publicly accessible

Dataset for report: Non-Technical Barriers to Geothermal Development in California and Nevada

In California and Nevada, geothermal projects are subject to non-technical barriers, which may create development delays leading to higher project costs and risks and decreased competitiveness with other electricity generation technologies. These non-technical barriers may include...

Levine, A. et al National Renewable Energy Laboratory

Mar 10, 2022
19 Resources
0 Stars
Publicly accessible

GeoVision Barriers Taskforce

This submission includes papers, presentations, and data developed during the multi-year GeoVision Barriers Taskforce effort. Developers have identified many non-technical barriers to geothermal power development, including land access, permitting, and market barriers. Included i...

Young, K. and Levine, A. National Renewable Energy Laboratory

Sep 30, 2015
5 Resources
0 Stars
Publicly accessible

Salton Sea Geothermal Development Nontechnical Barriers to Entry Analysis and Perspectives

The report included in this submission details the nontechnical barriers to entry for development of geothermal resources in the Salton Sea. The Salton Sea provides an economically viable opportunity for replacing the energy imported by California which makes up 25 percent of Cali...

Goodman, D. et al Pacific Northwest National Laboratory

Jun 28, 2022
1 Resources
0 Stars
Publicly accessible

1 2 3 4 5 Next >>