Search OEDI Data

WEC Controls Optimization Final Report

The over-arching project objective is to fully develop and validate optimal controls frameworks that can subsequently be applied widely to different WEC devices and concepts. Optimal controls of WEC devices represent a fundamental building block for WEC designers that must be cons...

Previsic, M. and Karthikeyan, A. Re Vision Consulting

Aug 26, 2020
1 Resources
0 Stars
Publicly accessible

Utah FORGE: 2023 Induced Seismicity Mitigation Plan

This is the updated Utah FORGE Phase 3B induced seismicity mitigation plan (ISMP) covering the general Utah FORGE area. This new version incorporates newly collected seismic data, including data collected during the 2022 stimulation and a probabilistic seismic hazard assessment (...

Pankow, K. et al University of Utah Seismograph Stations

Aug 09, 2023
1 Resources
0 Stars
Publicly accessible

Preliminary Analysis of Stress in the Newberry EGS Well NWG 55-29

As part of the planning for stimulation of the Newberry Volcano Enhanced Geothermal Systems (EGS) Demonstration project in Oregon, a high-resolution borehole televiewer (BHTV) log was acquired using the ALT ABI85 BHTV tool in the slightly deviated NWG 55-29 well. The image log rev...

Davatzes, N. and Hickman, S. National Energy Technology Laboratory

Jan 01, 2011
1 Resources
0 Stars
Publicly accessible

CO2 Push-Pull Dual (Conjugate) Faults Injection Simulations

This submission contains datasets and a final manuscript associated with a project simulating carbon dioxide push-pull into a conjugate fault system modeled after Dixie Valley- sensitivity analysis of significant parameters and uncertainty prediction by data-worth analysis. Datas...

Oldenburg, C. et al Lawrence Berkeley National Laboratory

Jul 20, 2017
2 Resources
0 Stars
Publicly accessible

Dynamically Downscaled Hourly Future Weather Data with 12-km Resolution Covering Most of North America

This is an hourly future weather dataset for energy modeling applications. The dataset is primarily based on the output of a regional climate model (RCM), i.e., the Weather Research and Forecasting (WRF) model version 3.3.1. The WRF simulations are driven by the output of a genera...

Zeng, Z. et al Argonne National Laboratory

Oct 03, 2023
4 Resources
0 Stars
Curated

Solar Row Zero Energy Townhomes Boulder, CO

Wonderland Development has constructed a new "near zero energy" row home design in North Boulder consisting of 9 units: one 5-plex and two duplexes. NREL has performed short-term tests and installed long-term monitoring equipment in three of these units. Two of these units used a ...

Norton, P. et al National Renewable Energy Laboratory

Sep 27, 2016
11 Resources
0 Stars
Publicly accessible

Utah FORGE Induced Seismicity Mitigation Plan

This is the current induced seismicity mitigation plan (ISMP) for the Utah FORGE project. Information that was collected during Phases 1 and 2 of the Utah FORGE project has been incorporated, as have literature searches and risk assessments. The purpose of this report is to identi...

Utah, U. et al Energy and Geoscience Institute at the University of Utah

Dec 30, 2020
2 Resources
0 Stars
Publicly accessible

Spray Foam Exterior Insulation with Stand-Off Furring New York

IBACOS and Green Homes America 1 (GHA) collaborated with the New York State Energy Research and Development Authority (NYSERDA) Advanced Buildings Program to research a variation of a commercial curtain wall assembly for residential construction as part of a comprehensive whole-ho...

Rapport, A. et al Ibacos Innovation

Apr 27, 2016
2 Resources
0 Stars
Publicly accessible

Active Source 3D Seismic Tomography of Brady Hot Springs Geothermal Field, Nevada

We deployed a dense seismic array to image the shallow structure in the injection area of the Brady Hot Springs geothermal site in Nevada. The array was composed of 238 5 Hz, three-component nodal instruments and 8,700 m of distributed acoustic sensing (DAS) fiber-optic cable inst...

Parker, L. University of Wisconsin

Aug 09, 2017
1 Resources
0 Stars
Publicly accessible

Typical Solar Years (TSYs) and Typical Wind Years (TWYs) for the Assessment of PV System and Wind Turbine Performance

This dataset comprises Typical Solar Years (TSYs) and Typical Wind Years (TWYs) for the efficient assessment of PV system and wind turbine performance for over 2,000 locations across the U.S. TSYs and TWYs are single synthetic years generated from the National Aeronautics and Spac...

Zeng, Z. et al Argonne National Laboratory

Jul 14, 2024
5 Resources
0 Stars
Curated

CO2 Push-Pull Single Fault Injection Simulations

ASCII text files containing grid-block name, X-Y-Z location, and multiple parameters from TOUGH2 simulation output of CO2 injection into an idealized single fault representing a dipping normal fault at the Desert Peak geothermal field (readable by GMS). The fault is composed of a ...

Borgia, A. et al Lawrence Berkeley National Laboratory

Sep 21, 2017
5 Resources
0 Stars
Publicly accessible

Hawthorne Nevada Deep Direct-Use Feasibility Study 3D Seismic

The objective of this project is to use a multi-disciplinary, three-tiered approach to assess the geothermal resource and determine the feasibility of implementing a large-scale, direct-use facility for the Hawthorne Army Depot (HAD) and the various town and county facilities in H...

Lowry, T. et al Nevada Bureau of Mines and Geology

Mar 29, 2018
6 Resources
0 Stars
Publicly accessible

Demand Response Across the Continental US for 2006

This project estimates hourly demand response availability across the continental U.S. for the year 2006. The resulting data set is disaggregated by balancing authority area, end use, and grid application. End uses include 14 categories across residential, commercial, industrial a...

Ma, S. Office of Energy Efficiency and Renewable Energy

Sep 12, 2016
6 Resources
0 Stars
Publicly accessible

Seedling Project Report: A Novel Heat Pump Integrated Underground Thermal Energy Storage for Shaping Electric Demand of Buildings

This report presents a preliminary assessment of the technical feasibility of utilizing underground thermal energy storage (UTES) and electric-driven heat pumps (EDHPs) to enable flexible behind-the-meter electric demand of buildings while meeting their thermal demands in an energ...

Liu, X. et al Oak Ridge National Laboratory

May 31, 2019
1 Resources
0 Stars
Publicly accessible

Utah FORGE Project 3-2535: Numerical Modeling of Energized Steel-Casing Source for Imaging Stimulated Zone

This short report details and tests the workflow that will be used to simulate steel well casings in deviated production/extraction boreholes at at the Utah FORGE site. Boreholes will be electrically energized and will serve as data sources for future proposed electromagnetic bore...

Um, E. et al Lawrence Berkeley National Laboratory

Nov 15, 2022
4 Resources
0 Stars
Publicly accessible

TEAMER AquaHarmonics High Fidelity WEC Sim PTO and Control Model Validation

Collaborative effort between AquaHarmonics, Sandia National Laboratories (SNL), and the National Renewable Energy Laboratory (NREL) to revise and validate Aquaharmonics' full wave to wire model, allowing for reduced uncertainty and increased understanding of design requirements of...

Tom, N. and Leon, J. AquaHarmonics, Inc.

Dec 31, 2021
5 Resources
0 Stars
Publicly accessible

Update on Geothermal Direct-Use Installations in the United States

An updated database of geothermal direct-use systems in the U.S. has been compiled and analyzed, building upon the Oregon Institute of Technology (OIT) Geo-Heat Center direct-use database. Types of direct-use applications examined include hot springs resorts and pools, aquaculture...

Beckers, K. et al National Renewable Energy Laboratory

Mar 02, 2017
2 Resources
0 Stars
Publicly accessible

2014 Wind Turbine Gearbox Damage Distribution based on the NREL Gearbox Reliability Database

Despite the improvements in wind turbine gearbox design and manufacturing practices, the wind industry is still challenged by premature wind turbine gearbox failures. To help address this industry-wide challenge, a consortium called the Gearbox Reliability Collaborative (GRC) was ...

Sheng, S. National Renewable Energy Laboratory

Feb 09, 2015
1 Resources
0 Stars
In curation

Material Properties for Brady Hot Springs Nevada USA from PoroTomo Project

The PoroTomo team has completed inverse modeling of the three data sets (seismology, geodesy, and hydrology) individually, as described previously. The estimated values of the material properties are registered on a three-dimensional grid with a spacing of 25 meters between nodes....

Feigl, K. and PoroTomo Team, . University of Wisconsin

Mar 06, 2019
10 Resources
0 Stars
Publicly accessible

Updated U.S. Low-Temperature Heating and Cooling Demand by County and Sector

This dataset includes U.S. low-temperature heating and cooling demand at the county level in major end-use sectors: residential, commercial, manufacturing, agricultural, and data centers. Census division-level end-use energy consumption, expenditure, and commissioned power databas...

Oh, H. and Beckers, K. National Renewable Energy Laboratory

Dec 31, 2022
6 Resources
0 Stars
Publicly accessible

Research Report of Low Temperature Geothermal Play Fairway Analysis for the Appalachian Basin

This is a final report summarizing a one-year (2014-15) DOE funded Geothermal Play Fairway Analysis of the Low-Temperature resources of the Appalachian Basin of New York, Pennsylvania and West Virginia. Collaborators included Cornell University, Southern Methodist University, and...

Jordan, T. et al Cornell University

Sep 30, 2015
22 Resources
0 Stars
Publicly accessible

Final Report Earth Source Heat: A Cascaded Systems Approach to DDU of Geothermal Energy on the Cornell Campus

The purpose of this document is to describe the contents contained within Geothermal Data Repository (GDR) node of the National Geothermal Data System (NGDS) that serves as the final report for the project "Earth Source Heat: A Cascaded Systems Approach to DDU of Geothermal Energy...

Tester, J. et al Cornell University

Oct 27, 2019
6 Resources
0 Stars
Publicly accessible

Utah FORGE Project 3-2535: Modeling Studies of Energized Steel-Casing Source EM Method for Detecting Stimulated Zone

Numerical modeling Studies for electromagnetic (EM) Data Acquisition Survey Design this milestone report describes the 3D modeling studies of energized steel-casing source electromagnetic method for detecting stimulated zone at the Utah FORGE Site. FORGE project 3-2535 is planning...

Um, E. et al Lawrence Berkeley National Laboratory

Feb 06, 2023
4 Resources
0 Stars
Publicly accessible

Utah FORGE Project 2439: A Multi-Component Approach to Characterizing In-Situ Stress

Core-based in-situ stress estimation, Triaxial Ultrasonic Velocity (labTUV) data, and Deformation Rate Analysis (DRA) data for Utah FORGE well 16A(78)-32 using triaxial ultrasonic velocity and deformation rate analysis. Report documenting a multi-component approach to characterizi...

Bunger, A. et al Battelle Memorial Institute

Dec 13, 2022
4 Resources
0 Stars
Publicly accessible

Low-Income Energy Affordability Data LEAD Tool 2018 Update

The Low-Income Energy Affordability Data (LEAD) Tool was created by the Better Building's Clean Energy for Low Income Communities Accelerator (CELICA) to help state and local partners understand housing and energy characteristics for the low and moderate-income (LMI) communities t...

Ma, O. U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy

Jul 01, 2020
55 Resources
0 Stars
Publicly accessible

<< Previous 1 2 3 4 5 6 Next >>