Search OEDI Data

Showing results 1 - 25 of 100.
Show results per page.
Order by:
Available Now:
Clear All Filters ×
Research Areas
Accessibility
Data Type
Organization
Source
"inclined fracture"×
Data×

Utah FORGE: Laboratory Fault Reactivation and Permeability Evolution During Fluid Injection

This dataset contains results from controlled shear reactivation experiments performed on cylindrical Westerly and granitoid granite samples with a single inclined fracture. Laboratory faults were pre-loaded near failure and reactivated by fluid injection to examine relationships ...
Elsworth, D. et al Pennsylvania State University
Sep 15, 2025
6 Resources
0 Stars
Publicly accessible

Utah FORGE: Temperature-Dependent Fracture Seismicity from Fluid Injection Experiments

This dataset contains experimental data from fluid injection experiments conducted to investigate the influence of temperature on fracture seismicity. The experiments were performed on granite samples from Utah FORGE. The samples were prepared with a 30-degree inclined fracture an...
Wang, J. et al Pennsylvania State University
Feb 29, 2024
4 Resources
0 Stars
Publicly accessible

Utah FORGE: Slide-Hold-Slide Experiments on Gneiss at Increased Temperature

Included are data from triaxial, single-inclined-fracture friction experiments. The experiments were performed with slide-hold-slide protocol on Utah FORGE gneiss at increased temperature. With a ~10 MPa normal stress, temperatures vary between experiments from room temperature u...
Eijsink, A. and Elsworth, D. Pennsylvania State University
Jul 25, 2023
24 Resources
0 Stars
Publicly accessible

Utah FORGE 5-2419: Fluid Injection Experiments on Granite Samples at Four Different Temperatures

This dataset contains results from four fluid injection experiments at 24 C, 69 C, 111 C, and 140 C using a triaxial loading apparatus ("Temco"). Tests were conducted on a Utah FORGE granite sample with a 30 degree inclined fracture. Confining pressure was maintained at 10 MPa, wh...
Wang, J. and Elsworth, D. Pennsylvania State University
Sep 05, 2024
4 Resources
0 Stars
Publicly accessible

Utah FORGE: Fault Shear Reactivation Experimental Data for Fluid Injection-Rate Controls on Seismic Moment

Included are experimental data recorded from shear experiments that specifically explore the link between fluid-injection rate and seismic moment resulting from shear reactivation of laboratory faults. Raw mechanical data from three experiments are included alongside corresponding...
Roseboom, M. et al Pennsylvania State University
Nov 07, 2023
6 Resources
0 Stars
Publicly accessible

Utah FORGE: Fluid Injection Induced Shearing Experiments on Fractured Granitoid at Elevated Temperatures

This repository contains experimental data from a series of fluid injection-induced shearing tests conducted on Utah FORGE granitoid. The experiments were performed using an aluminum triaxial pressure vessel (TEMCO) apparatus at Pennsylvania State University. The primary aim was t...
Elsworth, D. et al Pennsylvania State University
Aug 12, 2024
16 Resources
0 Stars
Publicly accessible

Utah FORGE: Laboratory Data for Emergent Pore Pressure Heterogeneity Controlling Slip Timing and Microseismicity

Included are experimental data recorded from shear experiments that explore the effects of pore pressure heterogeneity on microseismic character and fault slip timing resulting from shear reactivation of laboratory faults. Raw mechanical and acoustic data from 15 experiments are i...
Elsworth, D. et al Pennsylvania State University
Mar 02, 2026
32 Resources
0 Stars
Publicly accessible

Utah FORGE: Fault Reactivation Through Fluid Injection Induced Seismicity Laboratory Experiments

Included are results from shear reactivation experiments on laboratory faults pre-loaded close to failure and reactivated by the injection of fluid into the fault. The sample comprises a single-inclined-fracture (SIF) transecting a cylindrical sample of Westerly granite. All expe...
Yu, J. et al Pennsylvania State University
Jul 01, 2023
27 Resources
0 Stars
Publicly accessible

Utah FORGE: Fluid Injection-Rate Controls on Seismic Moment from Laboratory Fault Reactivation Experiments

This dataset contains experimental and acoustic data from shear reactivation tests that investigate the relationship between fluid-injection rate, pore pressure distribution, and seismic moment during laboratory fault slip. It includes raw mechanical data and acoustic emission rec...
Elsworth, D. et al Pennsylvania State University
Sep 16, 2025
31 Resources
0 Stars
Publicly accessible

Utah FORGE: Temperature-Dependent Mode-I Fracture Toughness of Granite from SCB Tests Dataset and Methods Report

This submission includes a methods report and an accompanying Excel dataset documenting temperature-dependent Mode-I fracture toughness (KIC) measurements for Utah FORGE granite obtained using semi-circular bending (SCB) tests in accordance with the ISRM Suggested Method. Testing ...
Dvory, N. and McLennan, J. University Of Utah
Feb 23, 2026
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Updated FMI Fracture Log from Well 16A(78)-32

This dataset consists of an Excel spreadsheet detailing the fracture picks from a reinterpretation of the formation micro-imaging (FMI) log from Utah FORGE well 16A(78)-32. The provided information details fracture location, geometry, and type. Also included here is a link to the...
Handwerger, D. Energy and Geoscience Institute at the University of Utah
Apr 17, 2024
3 Resources
0 Stars
Publicly accessible

Seismic Analysis of Spatio-Temporal Fracture Generation During EGS Resource Development Deviatoric MT, Fracture Network, and Final Report

This submission contains 167 deviatoric moment tensor (MT) solutions for the seismicity observed two years prior and three years post start of injection activities at The Geysers Prati 32 EGS Demonstration. Also included is a statistical representation of the properties of 751 fra...
Gritto, R. et al Array Information Technology
Sep 01, 2018
3 Resources
0 Stars
Publicly accessible

Water chemistry data and calculations for Fracture Sustainability Tests

Measured cation, anion, and silica are presented as well as calculations evaluating mass balance performed for 4 fracture sustainability tests under EGS conditions: Stripa granite, Metamudstone, Rhyolitic Ashflow Tuff, and Silicified Rhyolitic Tuff. Calculations of charge balance ...
Kneafsey, T. et al Lawrence Berkeley National Laboratory
Sep 30, 2020
2 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: Common Discrete Fracture Network

This package includes data and models that support hydraulic fracture stimulation and fluid circulation experiments in the Sanford Underground Research Facility (SURF). A paper by Schwering et al. (2020) describes the deterministic basis for developing a "common" discrete fracture...
Schwering, P. et al Sandia National Laboratories
Sep 18, 2019
4 Resources
0 Stars
Publicly accessible

Penn State Lab Testing Fluid-Rock Interaction in Geothermal Reservoirs

This project focused on assessment and discovery of fluid-rock interaction in geothermal reservoirs. We accomplished work in four main areas: 1) fracture formation and the relationship between fluid flow and shear failure, 2) assessment of fracture geometry and fluid permeability ...
Madara, B. et al Pennsylvania State University
Jan 01, 2018
5 Resources
0 Stars
Publicly accessible

Data of High-Temperature Dynamic LCM Testing Setup

Data from high temperature dynamic sealing tests for various fracture widths, at various temperatures (degrees F), with 5 wt.% bentonite-based mud containing various material fiber contents, at 100 to 400 psi differential pressure. Data from pressure test and evaluation of the dy...
Magzoub, M. et al University of Oklahoma
May 31, 2021
11 Resources
0 Stars
Publicly accessible

Improved Microseismicity Detection During Newberry EGS Stimulations

Effective enhanced geothermal systems (EGS) require optimal fracture networks for efficient heat transfer between hot rock and fluid. Microseismic mapping is a key tool used to infer the subsurface fracture geometry. Traditional earthquake detection and location techniques are oft...
Templeton, D. Lawrence Livermore National Laboratory
Oct 01, 2013
1 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: SIMFIP Notch-164 GRL Paper

Characterizing the stimulation mode of a fracture is critical to assess the hydraulic efficiency and the seismic risk related to deep fluid manipulations. We have monitored the three-dimensional displacements of a fluid-driven fracture during water injections in a borehole at ~1.5...
Guglielmi, Y. Lawrence Berkeley National Laboratory
Sep 24, 2020
9 Resources
0 Stars
Publicly accessible

Improved Microseismicity Detection During Newberry EGS Stimulations

Effective enhanced geothermal systems (EGS) require optimal fracture networks for efficient heat transfer between hot rock and fluid. Microseismic mapping is a key tool used to infer the subsurface fracture geometry. Traditional earthquake detection and location techniques are oft...
Templeton, D. Lawrence Livermore National Laboratory
Nov 01, 2013
1 Resources
0 Stars
Publicly accessible

Deep Direct-Use Feasibility Study Estimation of Reservoir Properties for the Tuscarora Sandstone

This dataset contains black-and-white photographic images of individual core segments from well Preston 119 and photomicrographs taken of petrographic thin sections from well Clay 513. Minipermeameter measurement results of 2,260 samples for fracture and matrix permeability on cor...
McDowell, R. West Virginia University
Dec 19, 2019
5 Resources
0 Stars
Publicly accessible

Shear Induced Permeability Test: Stripa Granite Temperature Pressure and Displacement Data

Spreadsheet containing the raw measured data, calibrated data, and brief explanation of data for Test1 Stripa Granite Geomechanical/Geochemical Test. Stress on fracture ~20.7 MPa.
Kneafsey, T. Lawrence Berkeley National Laboratory
Jun 21, 2014
1 Resources
0 Stars
Publicly accessible

Hydroshear Simulation Lab Test 2, Additional Data Sheets

This file contains additional data for this test (hydroshear test 3.2). In this test a sample of granite with a pre-cut (man made fracture) is confined, heated and differential stress is applied. The max temperature in this this system development test is 95C. More test details ca...
Bauer, S. Sandia National Laboratories
Aug 01, 2014
2 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: Second Set Tracer Test Results

The EGS Collab project is developing ~10-20 m-scale field sites where fracture stimulation and flow models can be validated against controlled, small-scale, in-situ experiments. The first multi-well experimental site was established at the 4850 level in the Homestake Mine in Lead,...
Neupane, G. et al Idaho National Laboratory
Dec 19, 2019
4 Resources
0 Stars
Publicly accessible

Utah FORGE: Pump and Probe Test on a Mated Fracture Westerly Granite Sample

This dataset contains results from a pump and probe experiment conducted on a mated fracture Westerly Granite sample with a diameter of 1 inch and a height of 2 7/8 inches. The experiment was performed within an aluminum triaxial pressure vessel (TEMCO) to investigate the non-line...
Klinghammer, H. et al Pennsylvania State University
May 19, 2024
4 Resources
0 Stars
Publicly accessible

Utah FORGE 5-2615: Laboratory Data for Insights on Hydraulic Fracture Closure and Stress Measurement

This dataset includes data from injection/fall-off experiments conducted in controlled laboratory settings. The aim is to investigate the physics governing fracture closure and the associated stress measurements during hydraulic fracturing. These time series data include flow rat...
Ye, Z. and Ghassemi, A. University of Oklahoma
Jun 12, 2024
6 Resources
0 Stars
Publicly accessible
1234Next >>