Search OEDI Data

NWEI Azura June 2018 Data

Data files for the NWEI Azura grid-connected deployment at the 30-meter berth of the US Navy's Wave Energy Test Site (WETS 30m Site) at the Kaneohe Marine Corps Base Hawaii (MCBH) on the windward (northeast) coast of the island of Oahu, HI. See general documentation describing sp...

Lettenmaier, T. Northwest Energy Innovations

Jul 31, 2018
8 Resources
0 Stars
Publicly accessible

Finite Element Analysis (FEA) for Water-Foam Fracturing of Granite Rock

In addition to the foam data that were obtained from literature and that were collected from the current study, simulation data was also generated from finite element analysis (FEA) conducted in this study using COMSOL Multiphysics software. The FEA models were built to simulate t...

Thakor, V. et al Temple University

May 04, 2021
1 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 2: Continuous Active Source Seismic Monitoring (CASSM)

The dataset contains continuous active-source seismic monitoring (CASSM) data collected during EGS Collab Experiment 2, conducted from February to September 2022 at the Sanford Underground Research Facility in Lead, South Dakota. This experiment aimed to investigate enhanced geoth...

Hopp, C. et al Lawrence Berkeley National Laboratory

Jan 06, 2025
3 Resources
0 Stars
Publicly accessible

Ocean Sentinel Mooring and Environmental Data 2013

Load cell data of Ocean Sentinel (OS) mooring, OS locations data and environmental conditions data (wave, wind, current) measured in the 2013 field test.

C., S. Oregon State University

Jul 29, 2013
6 Resources
0 Stars
Publicly accessible

Pacific Marine Energy Center benthic physical conditions, macrofauna, and groundfish abundances

From 2010 to 2015, box core grabs were collected at permanent stations around the Pacific Marine Energy Center North Energy Test Site (PMEC-NETS) off Newport, Oregon. At each box core station a conductivity, temperature, depth (CTD) cast was conducted. These data include the CTD f...

Henkel, S. Oregon State University

Aug 26, 2015
4 Resources
0 Stars
Publicly accessible

Wave Tank Testing Report for Controls Validation of a Heaving Point Absorber

The core objectives of this project is to improve the power capture of three different wave energy conversion (WEC) devices by more than 50% using an advanced control system and validate the attained improvements using wave tank and full scale testing. In parallel, we will bring a...

Previsic, M. et al Re Vision Consulting

Aug 26, 2020
3 Resources
0 Stars
Publicly accessible

Maximum demand charge rates for commercial and industrial electricity tariffs in the United States

NREL has assembled a list of U.S. retail electricity tariffs and their associated demand charge rates for the Commercial and Industrial sectors. The data was obtained from the Utility Rate Database. Keep the following information in mind when interpreting the data: (1) These data...

McLaren. . et al National Renewable Energy Laboratory

Sep 19, 2017
1 Resources
0 Stars
Publicly accessible

Development of a Downhole Tracer and pH Measurement Instrument for Application in Geothermal Wells

Due the high temperature and pressure conditions found in geothermal wells, tracer studies designed to elucidate properties of geothermal reservoirs are traditionally conducted by pulling liquid samples from the wellhead. These samples are then sent off for analysis in a fixed lab...

Hess, R. et al Sandia National Laboratories

Sep 11, 2013
1 Resources
0 Stars
Publicly accessible

Utility-Scale Solar, 2021 Edition: Analysis of Empirical Plant-level Data from U.S. Ground-mounted PV, PV+battery, and CSP Plants (exceeding 5 MWAC)

Berkeley Labs "Utility-Scale Solar", 2021 Edition presents analysis of empirical plant-level data from the U.S. fleet of ground-mounted photovoltaic (PV), PV+battery, and concentrating solar-thermal power (CSP) plants with capacities exceeding 5 MWAC. While focused on key developm...

Bolinger, M. et al Lawrence Berkeley National Lab

Sep 30, 2021
2 Resources
0 Stars
Publicly accessible

Harsh Environment Sensors for Geothermal Applications

Technical papers detailing the development of harsh environment sensors for geothermal applications. Principle Investigator is Prof. Albert P. Pisano (University of California, Berkeley). Submission includes a paper about geothermal environmental exposure testing on encapsulant a...

Senesky, D. et al Regents of the University University of California

Jan 01, 2012
2 Resources
0 Stars
Publicly accessible

Applications of Fractured Continuum Model to Enhanced Geothermal System Heat Extraction Problems

This paper describes the applications of the fractured continuum model to the different enhanced geothermal systems reservoir conditions. The capability of the fractured continuum model to generate fracture characteristics expected in enhanced geothermal systems reservoir environm...

Kalinina, E. et al Sandia National Laboratories

May 06, 2014
1 Resources
0 Stars
Publicly accessible

Chemical, Calcium Phosphate Cements for Geothermal Wells Corrosion Protection, Bond Strength and Matrix Self-Healing

The data set shows performance of economical calcium phosphate cement (Fondu) blended with fly ash, class F (FAF) in carbon steel corrosion protection tests (corrosion rate, corrosion current and potential), bond and matrix strength, as well as matrix strength recovery after impos...

Sugama, T. Brookhaven National Laboratory

Sep 26, 2017
2 Resources
0 Stars
Publicly accessible

SGW paper Rheological Properties of Drilling Fluids Containing Special Additives for Geothermal Drilling Applications

The paper was presented at the 46th Workshop on Geothermal Reservoir Engineering, Stanford University, Stanford, California, February 15-17, 2021. In this study, the effectiveness of different additives was evaluated in maintaining drilling fluid rheology at HPHT(high pressure and...

Mohamed, A. et al University of Oklahoma

Jan 04, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE 2439: Report on Minifrac Tests for Stress Characterization

This report describes minifrac tests conducted in the 16B(78)-32 well at the Utah FORGE site to characterize subsurface stresses, including the magnitude and orientation of the minimum and maximum horizontal stresses and the magnitude of the vertical stress. A minifrac test was co...

Kelley, M. et al Battelle Memorial Institute

Feb 22, 2024
1 Resources
0 Stars
Publicly accessible

Maui Gravity and Soil Gas Surveys

Contains a ground-based gravity survey of South Maui and a series of soil CO2 flux and temperature surveys encompassing Maui and the Big Island. The gravity survey was collected from approximately 284 km2 and consisted of 400 gravity stations with 400 m spacing. Locations were de...

Akerley, J. Ormat Nevada Inc

Apr 01, 2010
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Seismic Risk Trafic Light System Version 2

The report outlines the updated Traffic Light System (TLS) for the Utah FORGE project, which aims to mitigate seismic risks associated with Enhanced Geothermal Systems (EGS) operations. It integrates lessons from past operations, including stimulation and circulation experiments a...

Pankow, K. et al University of Utah Seismograph Stations

Jan 24, 2025
1 Resources
0 Stars
Publicly accessible

2018 Annual Technology Baseline ATB Cost and Performance Data for Electricity Generation Technologies Interim Data Without Geothermal Updates

Each year since 2015 NREL has presented Annual Technology Baseline ATB in a workbook that contains detailed cost and performance data both current and projected for renewable and conventional technologies. The workbook includes a spreadsheet for each technology. This workbook prov...

Augustine. . et al National Renewable Energy Laboratory

Jun 29, 2018
1 Resources
0 Stars
Publicly accessible

Devices Suitable for Sectional Isolation Along Both Cased and Open-hole Wellbores Geomechanical Packer Formation Model Iteraction

The main goal of this project is to develop an annular isolation system capable to withstand geothermal downhole conditions and mitigate the problems experienced by conventional packers in FORGE wells. This presentation outlines the work in rock modelling and interaction with the ...

Ghassemi, A. et al Welltec

Jun 20, 2023
2 Resources
0 Stars
Publicly accessible

Utah FORGE 1-2410: Development of a Smart Completion and Stimulation Solution Workshop Presentation

This is a presentation on the Development of a Smart Completion & Stimulation Solution project by Welltec in collaboration with the University of Oklahoma, presented by Yosafat Esquitin, a Senior Business Development Manager at Welltec. The project's objective was to develop an an...

Esquitin, Y. et al Welltec

Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE 4-2492: Design and Implementation of Innovative Stimulation Treatments to Maximize Energy Recovery Workshop Presentation

This is a presentation on the Design and Implementation of Innovative Stimulation Treatments to Maximize Energy Recovery Efficiency at the Utah FORGE Site project by The University of Texas at Austin, presented by Professor Mukul M. Sharma. The project's objectives were to place f...

Sharma, M. The University of Texas at Austin

Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Direct Shear Test Data for Investigating Seismic Precursors to Shear Failure of Fractures

This dataset includes results of direct shear tests to investigate the mechanical and geophysical response of dry and saturated fractures in Indiana limestone and Sierra White granite. Direct shear tests were performed on tensile-induced fractures in Indiana limestone and Sierra W...

Han, K. et al Purdue University

Jun 11, 2024
2 Resources
0 Stars
Publicly accessible

Tidal Current Cross-flow Turbine Wake ADV and PIV Data

Measurements in the wake of a high-solidity cross-flow turbine in a laboratory flume obtained using Acoustic Doppler Velocimetry and Particle Image Velocimetry for the purposes of characterizing the turbine wake and comparing the methods.

Polagye, B. University of Washington

Dec 06, 2016
6 Resources
0 Stars
Publicly accessible

CalWave Open Water Demonstration PTO Belt Assessment & Test Report Public

PTO (Power Take-Off) belt test and analysis report conducted under CalWave's Open Water Demonstration Award EE0008097 Belt Tradeoffs for Winch PTO. The report tests two types of belts: a high modulus polyethylene (HMPE) woven fiber belt and a steel cable polyurethane belt. The goa...

Kojimoto, N. and Boerner, T. CalWave Power Technologies Inc.

May 28, 2021
1 Resources
0 Stars
Publicly accessible

PR100: Puerto Rico Grid Resilience and Transition to 100% Renewable Energy

The Puerto Rico Grid Resilience and Transitions to 100% Renewable Energy Study (PR100) comprehensively analyzes possible pathways for Puerto Rico to achieve its renewable energy goals while incorporating stakeholder perspectives and advancing energy resilience for all Puerto Rican...

Sky, H. et al National Renewable Energy Laboratory (NREL)

Jul 01, 2022
17 Resources
1 Stars
Publicly accessible

Next Generation RivGen Power System: Kvichak River, AK Overwinter Ice Study

The University of Alaska Fairbanks (UAF) Alaska Hydrokinetic Energy Research Center was tasked with developing a real-time data telemetry / remote power generation system to monitor frazil ice conditions in the Kvichak River in support of the U.S. Department of Energy funded "Next...

Kasper, J. et al Igiugig Village Council

Oct 04, 2017
5 Resources
0 Stars
Publicly accessible

<< Previous 26 27 28 29 30 31 32 33 34 35 Next >>