Search OEDI Data

Deep Sedimentary Basin EGS Development

Stratigraphic reservoirs with high permeability and temperature at economically accessible depths are attractive for power generation because of their large areal extent (> 100 km2) compared to the fault controlled hydrothermal reservoirs (< 10 km2) found throughout much of the we...

Allis, R. and Moore, J. University of Utah

Jan 24, 2013
1 Resources
0 Stars
Publicly accessible

First Priority Geothermal Target Areas as Identified by ASTER and LANDSAT Thermal Imaging of Parts of Colorado

The CIRES remote sensing unit of the University of Colorado was commissioned by Flint Geothermal LLC to identify areas of warm ground that could signify the thermal signature of "blind" geothermal systems. Using ASTER and LANDSAT data along with other characteristics considered fa...

Hussein, K. Flint Geothermal, LLC

Feb 01, 2012
1 Resources
0 Stars
Publicly accessible

Measure Guideline: Deep Energy Enclosure Retrofit for Interior Insulation of Masonry Walls and Flat Roofs

Measure Guideline: Deep Energy Enclosure Retrofit for Zero Energy Ready House Flat Roofs BSC TO5 Task 7.4 Deep Energy Enclosure Retrofit (DEER) for Interior Insulation of Masonry Walls Lawrence, MA 01840 This Measure Guideline describes a deep energy enclosure retrofit solution ...

Musunuru, S. et al Building Science Corporation

Apr 27, 2016
5 Resources
0 Stars
Publicly accessible

Simulink Model of a New Energy EVG-005 5kW Hydropower Turbine

Simulink model for a New Energy 5kW hydropower turbine. ADCP data ("ds_streamwise_7_13.nc") and DC voltage, DC current, and rotor rotation observed from the New Energy EVG-005 Current Energy Converter (CEC) ("electrical_7_13_10ohms.nc") were collected at the Tanana River Test Sit...

Browning, E. et al University of Alaska Fairbanks

Jul 13, 2023
2 Resources
0 Stars
Publicly accessible

Seedling Project Report: A Novel Heat Pump Integrated Underground Thermal Energy Storage for Shaping Electric Demand of Buildings

This report presents a preliminary assessment of the technical feasibility of utilizing underground thermal energy storage (UTES) and electric-driven heat pumps (EDHPs) to enable flexible behind-the-meter electric demand of buildings while meeting their thermal demands in an energ...

Liu, X. et al Oak Ridge National Laboratory

May 31, 2019
1 Resources
0 Stars
Publicly accessible

Energy and Economic Assessment of a Stirling Engine Powered by Solar Energy in Bolivia

The Bolivian governments concerns that are related to reducing the consumption of diesel fuel, which is imported, subsidized, and provided to isolated electric plants in rural communities, have led to the implementation of hybrid power systems. The data in this submissions was cre...

Jimenez, P. San Simon University

Dec 10, 2021
5 Resources
0 Stars
Publicly accessible

Advanced TidGen Power System Material Characterization Program

The TidGen Power System generates emission-free electricity from tidal currents and connects directly into existing grids using smart grid technology. The power system consists of three major subsystems: shore-side power electronics, mooring system, and turbine generator unit (TGU...

Marnagh, C. and McEntee, J. Ocean Renewable Power Company

Jun 14, 2018
2 Resources
0 Stars
Publicly accessible

1D Heat Loss Models Validation Experiment

Contains data from the model validation in the 1D Heat Loss Models to Predict the Aquifer Temperature Profile during Hot/Cold Water Injection Project. The data include two COMSOL models (2D axisymmetric benchmark model and 2D Vinsome model), one python code (1D Vinsome based FEM n...

Chen, K. et al UC Berkeley

Jan 18, 2022
8 Resources
0 Stars
Publicly accessible

Laboratory Upgrade Point Absorber WEC-Sim Model with MoorDyn Moorings

This dataset includes a WEC-Sim and MoorDyn model of the Laboratory Upgrade Point Absorber (LUPA). LUPA is an open-source wave energy converter designed and tested by Oregon State University. The files provided here constitute a stable LUPA configuration with three mooring lines. ...

Mcconnell, A. Oregon State University

Oct 08, 2024
2 Resources
0 Stars
Publicly accessible

TEAMER: Numerical Modeling and Optimization of the iProTech Pitching Inertial Pump (PIP) Wave Energy Converter (WEC)

This project focused on developing an automated workflow to evaluate and optimize the iProTech Pitching Inertial Pump (PIP) wave energy converter (WEC) using open-source Python packages and the MATLAB/Simulink tool, WEC-Sim. The process involved parameterizing key design variables...

Wynn, N. et al National Renewable Energy Laboratory

Apr 11, 2024
1 Resources
0 Stars
Publicly accessible

Economic Impact of Permitting Timelines on Produced Geothermal Power

Despite having a large geothermal power potential in the United States, only a small fraction has been developed for power generation. Various barriers, including technical, financial, and regulatory permit delays, are attributed to lower contribution of geothermal energy in the n...

Neupane, G. and Adhikari, B. Idaho National Laboratory

Feb 15, 2022
3 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: TOUGH2-CSM Simulation of Embedded Natural Fractures and Chemical Tracer Transport and Sorption

The EGS Collab SIGMA-V project is a multi-lab and university collaborative research project that is being undertaken at the Sanford Underground Research Facility (SURF) in South Dakota. The project consists of studying stimulation, fluid-flow, and heat transfer processes at a scal...

Johnston, B. et al National Renewable Energy Laboratory

Jun 07, 2019
4 Resources
0 Stars
Publicly accessible

U.S. Solar Photovoltaic System and Energy Storage Cost Benchmarks: Q1 2021

NREL has been modeling U.S. solar photovoltaic (PV) system costs since 2009. This year, our report benchmarks costs of U.S. PV for residential, commercial, and utility-scale systems, with and without storage, built in the first quarter of 2021 (Q1 2021). The methodology includes b...

Ramasamy and FeldmanNational Renewable Energy Laboratory

Nov 08, 2021
2 Resources
0 Stars
Publicly accessible

Occupant Behavior in Commercial Buildings: Synthetic Population, Co-Simulation with EnergyPlus and Agent Based Modeling

This technical manual serves as an outline of three separate research projects related to building energy performance modeling of occupant behavior, conducted at the Rutgers Center for Green Building (RCGB): a Synthetic Population project, a Co-Simulation of Synthetic Population w...

Andrews, C. National Renewable Energy Laboratory

Apr 26, 2016
1 Resources
0 Stars
In curation

StingRAY H1 Humboldt Cost Breakdown Structure

Columbia Power LCOE (levelized cost of energy) Model for the Stingray H1 at the DOE Reference Site of Humboldt, CA. The model is integrated with and reports LCOE from DOE Cost Breakdown Structure

Rhinefrank, K. Columbia Power Technologies, Inc.

Mar 06, 2017
1 Resources
0 Stars
Publicly accessible

Fallon FORGE: Thermal-Hydrological-Mechanical Models

Archive contains thermal-mechanical simulation input/output files. Included are files which fall into the following categories: ( 1 ) Spreadsheets with various input parameter calculations ( 2 ) Final Simulation Inputs ( 3 ) Native-State Thermal-Hydrological Model Input File Fol...

Blankenship, D. and Sonnenthal, E. Sandia National Laboratories

Mar 12, 2018
2 Resources
0 Stars
Publicly accessible

Dixie Valley Engineered Geothermal System Exploration Methodology Project, Baseline Conceptual Model Report

The Engineered Geothermal System (EGS) Exploration Methodology Project is developing an exploration approach for EGS through the integration of geoscientific data. The Project chose the Dixie Valley Geothermal System in Nevada as a field laboratory site for methodlogy calibration...

Iovenitti, J. AltaRock Energy Inc

May 15, 2013
2 Resources
0 Stars
Publicly accessible

Model and experimental validation of ocean kite dynamics and controls

This submission includes two peer-reviewed papers from researchers at North Carolina State University presenting the modeling and lab-scale experimentation of the dynamics and control of a tethered tidal ocean kite. Below are the abstracts of each file included in the submission. ...

Vermillion, C. et al North Carolina State University

Mar 01, 2020
2 Resources
0 Stars
Publicly accessible

LCOE Content Model for the Heaving Point Absorber Buoy

This is the LCOE analysis spreadsheet and content model for the heaving point absorber buoy developed for controls purposes. The cost assessment was done on a wave-farm of 100-units.

Previsic, M. and Karthikeyan, A. Re Vision Consulting

Jul 14, 2017
3 Resources
0 Stars
Publicly accessible

Utah FORGE LBNL 3-2535 Preliminary Report on Development of a Reservoir Seismic Velocity Model

This report describes the development of a preliminary 3D seismic velocity model at the Utah FORGE site and first results from estimating seismic resolution in the generated fracture volume during Stage 3 of the April 2022 stimulation. A preliminary 3D velocity model for the larg...

Gritto, R. Array Information Technology

Jan 30, 2023
1 Resources
0 Stars
Publicly accessible

DEEPEN Global Standardized Categorical Exploration Datasets for Magmatic Plays

DEEPEN stands for DE-risking Exploration of geothermal Plays in magmatic ENvironments. As part of the development of the DEEPEN 3D play fairway analysis (PFA) methodology for magmatic plays (conventional hydrothermal, superhot EGS, and supercritical), weights needed to be develop...

Taverna, N. et al National Renewable Energy Laboratory

Jun 30, 2023
4 Resources
0 Stars
Publicly accessible

University of Illinois Campus Deep Direct-Use Feasibility Study Preliminary Geothermal Reservoir Model

Preliminary geothermal reservoir simulations were performed using a homogeneous static model to evaluate and understand the effects of fluid and rock properties that could influence the delivery of thermal energy in a doublet system. A 5000 feet by 5100 feet by 500 feet homogeneou...

Okwen, R. University of Illinois

May 08, 2018
4 Resources
0 Stars
Publicly accessible

Fallon FORGE: 3D Geologic Model

An x,y,z scattered data file for the 3D geologic model of the Fallon FORGE site. Model created in Earthvision by Dynamic Graphic Inc. The model was constructed with a grid spacing of 100 m. Geologic surfaces were extrapolated from the input data using a minimum tension gridding al...

Blankenship, D. Sandia National Laboratories

Mar 01, 2016
1 Resources
0 Stars
Publicly accessible

Regional Slip Tendency Analysis of the Great Basin Region

Slip and dilation tendency on the Great Basin fault surfaces (from the USGS Quaternary Fault Database) were calculated using 3DStress (software produced by Southwest Research Institute). Slip and dilation tendency are both unitless ratios of the resolved stresses applied to the f...

E., J. University of Nevada

Sep 30, 2013
1 Resources
0 Stars
Publicly accessible

West Flank Coso FORGE: 3D Geologic Model

This is an x,y,z file of the West Flank FORGE 3D geologic model. Model created in Earthvision by Dynamic Graphic Inc. The model was constructed with a grid spacing of 100 m. Geologic surfaces were extrapolated from the input data using a minimum tension gridding algorithm. The da...