Search OEDI Data

Gearbox Reliability Collaborative Phase 3 Gearbox 3 Test

The GRC uses a combined gearbox testing, modeling, and analysis approach disseminating data and results to the industry and facilitating improvement of gearbox reliability. This test data describes the tests of GRC gearbox 3 in the National Wind Technology Center dynamometer and d...

Keller and WallenNational Renewable Energy Laboratory

Dec 21, 2016
18 Resources
0 Stars
Publicly accessible

Monitoring of Double-Stud Wall Moisture Conditions in the Northeast

BSC TO5 Task 2.2 Monitoring of Double Stud Wall Moisture Conditions in the Northeast Field test data available for wood moisture contents, temperature, and relative humidity. STRUCTURE House Devens, MA 01432 Three double-stud assemblies were compared: 12-in. ocSPF, 12-in. cellulo...

Ueno, K. Building Science Corporation

Apr 27, 2016
2 Resources
0 Stars
Publicly accessible

Operational Performance Requirements For Motor Power Sections Used in Geothermal Drilling Based Upon Minimum Specific Energy

Operational performance requirements are needed to support development of specifications for downhole motor power sections to be used for drilling hard rock during geothermal wellbore construction. Theoretical torque specifications are derived based upon a widely-accepted rock-re...

Raymond, D. Sandia National Laboratories

Sep 10, 2014
1 Resources
0 Stars
Publicly accessible

Installation of an Agrivoltaic System Influences Microclimatic Conditions and Leaf Gas Exchange in Cranberry

Cranberry production is vital to the economy of Massachusetts and in 2018 the Massachusetts Department of Energy Resources launched the Solar Massachusetts Renewable Target (SMART) program to create financial incentives for agrivoltaic systems. Agrivoltaic systems utilize the same...

Mupambi, G. et al University of Massachusetts Amherst

Jun 23, 2022
1 Resources
0 Stars
Publicly accessible

2017 Annual Technology Baseline (ATB): Cost and Performance Data for Electricity Generation Technologies

Each year since 2015, NREL has presented Annual Technology Baseline (ATB) in a spreadsheet that contains detailed cost and performance data (both current and projected) for renewable and conventional technologies. The spreadsheet includes a workbook for each technology. This sprea...

Hand. . et al National Renewable Energy Laboratory

Aug 21, 2017
1 Resources
0 Stars
Publicly accessible

Observation-Based Resource Assessment of Gulf Stream MHK

Multi-year measurements of current velocity, salinity, and temperature from fixed and vessel-mounted sensors quantify Gulf Stream (GS) MHK resource variability and inform development off Cape Hatteras, NC. Vessel transects across the GS demonstrate a jet-like velocity structure wi...

Muglia, M. et al North Carolina State University

Jan 01, 2020
1 Resources
0 Stars
Publicly accessible

Slip and Dilation Tendency Analysis of the Patua Geothermal Area

Critically stressed fault segments have a relatively high likelihood of acting as fluid flow conduits (Sibson, 1994). As such, the tendency of a fault segment to slip or to dilate provides an indication of which faults or fault segments within a geothermal system are critically st...

E., J. University of Nevada

Dec 31, 2013
1 Resources
0 Stars
Publicly accessible

M3 Wave DMP/APEX WEC Survival Test Report

This survival test report for the Delos-Reyes Morrow Pressure Device (DMP), commercialized by M3 Wave LLC as "APEX," summarizes the key tank test data, numerical model results, input test conditions (both numerical and tank testing), and crosses these items with three designs of t...

Morrow, M. and Delos-Reyes, M. M3 Wave

Aug 31, 2017
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Data for 3-D Model Development Lithology, Temperature, Pressure, and Stress

This submission comprises two downloadable .zip archives. Each archive contains spreadsheets with 3-D data and a .txt document describing the data. The Mesh Files .zip download contains data regarding the lithologic contacts of the granitoid and overlying sedimentary basin fill. T...

Podgorney, R. Idaho National Laboratory

Mar 17, 2020
2 Resources
0 Stars
Publicly accessible

Inputs and Outputs for "A Resource Adequacy Assessment of Correlated Wide-Area Outages in the Power Grid”

This readme describes the input and output files associated with the study “A Resource Adequacy Assessment of Correlated Wide-Area Outages in the Power Grid” (DOI: 10.1088/2753-3751/add465). Specifically, it contains both the inputs and outputs of Probabilistic Resource Adequa...

Dhulipala. . et al National Renewable Energy Laboratory

May 19, 2025
3 Resources
0 Stars
Publicly accessible

Stability of Elastomers Subjected to Geothermal Well-Like Conditions

The aim of this study is to understand how commercially available elastomers perform under geothermal well-like conditions and make recommendations to the community based on these results. This poster highlights the mechanical performance of several elastomers (including EPDM, Vit...

Redline, E. et al Sandia National Laboratories

Aug 10, 2014
1 Resources
0 Stars
Publicly accessible

Drilling Monitoring Program: Computer Program on Heat Transfer Temperature Distribution Hydraulic Calculations for Abrasive Jet Drilling

A program was created to evaluate the downhole conditions occurring in a FLASH ASJ drilling system. the program is meant to aid the operator of a coiled tubing rig in maintaining optimum drilling conditions.

Ozbayoglu, E. Impact Technologies LLC

Jan 01, 2011
1 Resources
0 Stars
Publicly accessible

Magnetic Test Loop Particle Retention Data for REE Extraction from Geothermal Fluids

Measurements of particle extraction efficiency under various flow rate and magnetic power conditions

McGrail, P. and Liu, J. Pacific Northwest National Laboratory

Jul 27, 2018
2 Resources
0 Stars
Publicly accessible

Co-Design of Marine Energy Converters for Autonomous Underwater Vehicle Docking and Recharging Software and Data

Software and testing data from the OH Hinsdale Wave lab for DOE-funded project on Co-Design of Marine Energy Converters for Autonomous Underwater Vehicle Docking and Recharging. This project will perform foundational research and testing to accelerate the sector-wide development a...

Hollinger, G. et al Oregon State University

Oct 26, 2022
11 Resources
0 Stars
Publicly accessible

Evaluation of the Performance of Houses With and Without Supplemental Dehumidification in a Hot-Humid Climate

Understanding indoor humidity conditions in low energy homes in hot-humid climates is critical to promoting long term occupant comfort, indoor air quality and building durability. The results of this study were expected to inform the residential building community on whether suppl...

Kerrigan, P. and Norton, P. National Renewable Energy Laboratory

Apr 27, 2016
7 Resources
0 Stars
Publicly accessible

One year occupant behavior/environment data for medium U.S. office

One year of longitudinal data (fifteen minute interval) on local thermal conditions, related behaviors, and comfort of twenty-four occupants of a medium-sized office building in Philadelphia, PA. Please cite: Langevin, J., Gurian, P.L., and Wen, J. (2015). Tracking the human...

Langevin, J. Lawrence Berkeley National Laboratory

Jul 20, 2015
2 Resources
1 Stars
In curation

DEEPEN 3D PFA Favorability Models and 2D Favorability Maps at Newberry Volcano

DEEPEN stands for DE-risking Exploration of geothermal Plays in magmatic ENvironments. Part of the DEEPEN project involved developing and testing a methodology for a 3D play fairway analysis (PFA) for multiple play types (conventional hydrothermal, superhot EGS, and supercritical...

Taverna, N. et al National Renewable Energy Laboratory

Jun 30, 2023
27 Resources
0 Stars
Publicly accessible

Utah FORGE 5-2565: Evolution of Permeability and Strength Recovery of Shear Fractures Under Hydrothermal Conditions 2024 Annual Workshop Presentation

This is a presentation on the Evolution of Permeability and Strength Recovery of Shear Fractures Under Hydrothermal Conditions by United States Geological Survey, presented by Tamara Jeppson. This video slide presentation, by the USGS, discusses the determination of how thermal, ...

Jeppson, T. et al Energy and Geoscience Institute at the University of Utah

Sep 15, 2024
1 Resources
0 Stars
Publicly accessible

Illite Dissolution Rates and Equation (100 to 280 deg C)

The objective of this suite of experiments was to develop a useful kinetic dissolution expression for illite applicable over an expanded range of solution pH and temperature conditions representative of subsurface conditions in natural and/or engineered geothermal reservoirs. Usi...

Carroll, S. Lawrence Livermore National Laboratory

Oct 17, 2014
1 Resources
0 Stars
Publicly accessible

Utah FORGE 2-2439: A Multi-Component Approach to Characterizing In-Situ Stress: Laboratory, Modeling and Field Measurement Workshop Presentation

This is a presentation on A Multi-Component Approach to Characterizing In-Situ Stress at the U.S DOE FORGE EGS Site: Laboratory, Modeling and Field Measurement project by Battelle [Columbus, OH], presented by Mark Kelley. The project's objective was to characterize stress in the U...

Kelley, M. and Bunger, A. Battelle Memorial Institute

Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

Temperature and Pressure Data Brady Monitoring Well SP-2

Static Pressure and Temperature Log for Brady monitor well SP-2. This data was taken from Well SP-2 which is part of the Brady Hot Springs Geothermal Site. The data contains pressure and temperature vs depth data for RIH (run in hole) Static conditions and POOH (pull out of hole) ...

Akerley, J. University of Wisconsin

Jan 01, 2015
2 Resources
0 Stars
Publicly accessible

Development of a Neutron Diffraction Based Experimental Capability for Investigating Hydraulic Fractures for EGS-like Conditions

Understanding the relationship between stress state, strain state and fracture initiation and propagation is critical to the improvement of fracture simulation capability if it is to be used as a tool for guiding hydraulic fracturing operations. The development of fracture predict...

Polsky, Y. et al Oak Ridge National Laboratory

Feb 01, 2013
1 Resources
0 Stars
Publicly accessible

BENEFIT with Northeastern University: HVAC Hardware-in-the-Loop Experimental Testing of Heat Pump and Air Conditioner

This dataset includes HVAC Hardware-in-the-Loop (HIL) experimental results for a single stage, SEER 16, HSPF 9.5, 3-ton single-speed air source heat pump with 15 kW of backup auxiliary heating tested in both cooling and heating mode, and a two-stage, SEER 21, 2-ton central air con...

Ramaraj and SparnNational Renewable Energy Laboratory

Sep 10, 2024
25 Resources
0 Stars
Publicly accessible

M3 Wave DMP/APEX WEC 1:10 Scale Preliminary Tank Test Plan

This is a preliminary test plan for testing of the Delos-Reyes Morrow Pressure Device (DMP), commercialized by M3 Wave LLC as "APEX," at Hinsdale Wave Research Laboratory at Oregon State University. Additional logistical details and instrumentation specifics will be added as engi...

Delos-Reyes, M. and Morrow, M. M3 Wave

Feb 23, 2017
1 Resources
0 Stars
Publicly accessible

Centipod WEC, Survivable Wave Energy Converters, Final Technical Report

This project shows that the choice of a secondary DOF for survivability is a viable option to reduce the levelized cost of energy (LCOE) in WEC designs. This report will cover the calculation of the concluded LCOE advantage using Dehlsen Associates’ “Centipod” WEC, but will ...

McCall, A. Dehlsen Associates, LLC

Oct 16, 2020
1 Resources
0 Stars
Publicly accessible

<< Previous 1 2 3 4 5 6 Next >>