Search OEDI Data

Newberry FORGE: 3D Gravity Density Model for Newberry Volcano

These data are Pacific Northwest National Lab inversions of an amalgamation of two surface gravity datasets: Davenport-Newberry gravity collected prior to 2012 stimulations and Zonge International gravity collected for the project "Novel use of 4D Monitoring Techniques to Improve...

Bonneville, A. Pacific Northwest National Laboratory

Mar 11, 2016
1 Resources
0 Stars
Publicly accessible

Hawthorne Nevada Deep Direct-Use Feasibility Study References, Reports, Literature

The objective of this project is to use a multi-disciplinary, three-tiered approach to assess the geothermal resource and determine the feasibility of implementing a large-scale, direct-use facility for the Hawthorne Army Depot (HAD) and the various town and county facilities in H...

Lowry, T. Nevada Bureau of Mines and Geology

Mar 29, 2018
3 Resources
0 Stars
Publicly accessible

Utah FORGE: Drilling Data for Student Competition

Diagnostic drilling data (Pason log files) from Well 58-32 (previously labeled MU-ESW1), which was drilled near Milford Utah during Phase 2B of the FORGE Project to confirm geothermal reservoir characteristics met requirements for the final FORGE site. This dataset includes both ...

Podgorney, R. et al Idaho National Laboratory

Dec 07, 2018
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Data for 3-D Model Development Lithology, Temperature, Pressure, and Stress

This submission comprises two downloadable .zip archives. Each archive contains spreadsheets with 3-D data and a .txt document describing the data. The Mesh Files .zip download contains data regarding the lithologic contacts of the granitoid and overlying sedimentary basin fill. T...

Podgorney, R. Idaho National Laboratory

Mar 17, 2020
2 Resources
0 Stars
Publicly accessible

Generalized Displacement Correlation Method for Estimating Stress Intensity Factors

This paper presents a generalized form of the displacement correlation method (the GDC method), which can use any linear or quadratic finite element type with homogeneous meshing without local refinement. These two features are critical for modeling dynamic fracture propagation pr...

Fu, P. et al Lawrence Livermore National Laboratory

Jan 01, 2012
1 Resources
0 Stars
Publicly accessible

GEO3D Three-Dimensional Computer Model of a Ground Source Heat Pump System

This file is the setup file for GEO3D, a computer program written by Jim Menart to simulate vertical wells in conjunction with a heat pump for ground source heat pump (GSHP) systems. This is a very detailed three-dimensional computer model. This program produces detailed heat tran...

Menart, J. Wright State University

Jun 07, 2013
3 Resources
0 Stars
Publicly accessible

Flow Redirection and Induction in Steady State (FLORIS) Wind Plant Power Production Data Sets

This dataset contains turbine and plant-level power outputs for 252,500 cases of diverse wind plant layouts operating under a wide range of yawing and atmospheric conditions. The power outputs were computed using the Gaussian wake model in NREL's FLOw Redirection and Induction in ...

Ramos, D. et al National Renewable Energy Laboratory

Feb 12, 2021
5 Resources
0 Stars
Publicly accessible

Utah FORGE: Faults, Fractures, and Lineaments in the Mineral Mountains

This submission includes a shapefile of the Opal Mound Fault, and multiple datasets of lineaments mapped in the Mineral Mountains which overlook the Utah FORGE site, hyperlinked to rose diagrams in a polygon grid shapefile.

Moore, J. Energy and Geoscience Institute at the University of Utah

Mar 09, 2016
2 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: Tracer data tests

This file contains the first set of tracer data for the EGS Collab testbed. The first set of tracer tests were conducted during October-November, 2018. We have included tracer data for C-dots, chloride, fluorescein, and rhodamine-B. The details about the tracer test can be found i...

Neupane, G. et al Idaho National Laboratory

Apr 16, 2019
3 Resources
0 Stars
Publicly accessible

Design of high deflection foils for MHK applications CFD files

The Ocean Renewable Power Company's (ORPC's) goal is to design, develop, and test hydrofoils with large deflections. The effects of the deflections on cross-flow turbine performance would be evaluated in order to inform design considerations for full-scale water turbines and other...

Barrington, M. and McEntee, J. Ocean Renewable Power Company

Jun 01, 2021
5 Resources
0 Stars
Publicly accessible

Tidal Currents Turbine Parametric Study

This is an exercise in optimizing the flow through a shrouded axial turbine to have the least resistance and to have optimal output and torque and energy. In this study, different variates of the original geometry of the current turbine designed by Hydrokinetic Energy Corp. (HEC) ...

Schurtenberger, W. and Ge, Z. Hydrokinetic Energy Corp.

Jul 30, 2021
3 Resources
0 Stars
Publicly accessible

Tidal Currents in San Juan Archipelago, Washington

Re-analyzed acoustic Doppler current profiler (ADCP) data originally collected by NOAA CO-OPS (Center for Operational Oceanographic Products and Services) and equivalent point data from Pacific Northwest National Laboratory's FVCOM (Finite Volume Community Ocean Model) model of th...

Polagye, B. et al University of Washington

Dec 15, 2022
3 Resources
0 Stars
Publicly accessible

Investigation of Stimulation-Response Relationships for Complex Fracture Systems in Enhanced Geothermal Reservoirs

Hydraulic fracturing is currently the primary method for stimulating low-permeability geothermal reservoirs and creating Enhanced (or Engineered) Geothermal Systems (EGS) with improved permeability and heat production efficiency. Complex natural fracture systems usually exist in ...

Fu, P. et al Lawrence Livermore National Laboratory

Jan 01, 2011
2 Resources
0 Stars
Publicly accessible

Mapping Fracture Network Creation with Microseismicity During EGS Demonstrations

This a report for the project "Mapping Fracture Network Creation with Microseismicity During EGS Demonstrations". Effective enhanced geothermal systems (EGS) require optimal fracture networks for efficient heat transfer between hot rock and fluid. Microseismic mapping is a key too...

Templeton, D. et al Lawrence Livermore National Laboratory

Apr 18, 2014
1 Resources
0 Stars
Publicly accessible

Analyzed Boise Data for Oscillatory Hydraulic Tomography

Data here has been "pre-processed" and "analyzed" from the raw data submitted to the GDR previously (raw data files found at http://gdr.openei.org/submissions/479. doi:10.15121/1176944 after 30 September 2017). First, we submit .mat files which are the "pre-processed" data (must h...

Lim, D. University of Wisconsin

Jul 01, 2015
8 Resources
0 Stars
Publicly accessible

Commercial and Residential Hourly Load Profiles for all TMY3 Locations in the United States

Note: This dataset has been superseded by the dataset found at "End-Use Load Profiles for the U.S. Building Stock" (submission 4520; linked in the submission resources), which is a comprehensive and validated representation of hourly load profiles in the U.S. commercial and reside...

Ong, S. and Clark, N. National Renewable Energy Laboratory

Nov 25, 2014
22 Resources
0 Stars
Curated

Energy and Economic Assessment of a Stirling Engine Powered by Solar Energy in Bolivia

The Bolivian governments concerns that are related to reducing the consumption of diesel fuel, which is imported, subsidized, and provided to isolated electric plants in rural communities, have led to the implementation of hybrid power systems. The data in this submissions was cre...

Jimenez, P. San Simon University

Dec 10, 2021
5 Resources
0 Stars
Publicly accessible

Hawaii Play Fairway Analysis: Recharge Data for Hawaii Island

Recharge data for Hawaii Island in shapefile format. The data are from the following sources: Whittier, R.B and A.I. El-Kadi. 2014. Human Health and Environmental Risk Ranking of On-Site Sewage Disposal systems for the Hawaiian Islands of Kauai, Molokai, Maui, and Hawaii Final, ...

Lautze, N. University of Hawaii

Jan 01, 2015
8 Resources
0 Stars
Publicly accessible

Modular Zero Energy Ready Homes: Bright Built Maine

Kaplan Thompson Architects (KTA) has specialized in sustainable, energy-efficient buildings, and they have designed several custom, zero-energy homes in New England. These zero-energy projects have generally been high-end, custom homes with budgets that could accommodate advanced ...

Aldrich, R. and Butterfield, K. Steven Winter Associates of the Consortium for Advanced Residential Buildings

Apr 27, 2016
2 Resources
0 Stars
Publicly accessible

Seedling Project Report: A Novel Heat Pump Integrated Underground Thermal Energy Storage for Shaping Electric Demand of Buildings

This report presents a preliminary assessment of the technical feasibility of utilizing underground thermal energy storage (UTES) and electric-driven heat pumps (EDHPs) to enable flexible behind-the-meter electric demand of buildings while meeting their thermal demands in an energ...

Liu, X. et al Oak Ridge National Laboratory

May 31, 2019
1 Resources
0 Stars
Publicly accessible

Most Likely Extreme Response Analysis of an Ellipsoid Float Wave Energy Converter

Input data and heave results (unsteady RANS-VOF overset simulations performed in Star-CCM+) for a float with an ellipsoid geometry. Five extreme sea states were considered, as detailed in the conference paper "Application of the Most Likely Extreme Response Method for Wave Energy ...

Quon, E. National Renewable Energy Laboratory

Jun 17, 2016
7 Resources
0 Stars
Publicly accessible

Fracture Sustainability Test, Pre and Post-Test Photomicrographs

The primary objective of this research is to understand how different rock types, mineral and fluid compositions, and fracture surface textures determine the longevity of fracture apertures, so that selection of reservoir rock can be economically optimized to reduce future refract...

Dobson, P. et al Lawrence Berkeley National Laboratory

Sep 26, 2016
9 Resources
0 Stars
Publicly accessible

Hawthorne Nevada Deep Direct-Use Feasibility Study Data Used for Geothermal Resource Conceptual Modeling and Power Capacity Estimates

This data submission includes several data components that were used to develop a conceptual model and power capacity-estimates of two low-temperature geothermal resources that define geothermal prospect A at Hawthorne, Nevada. Data are sourced from a combination of legacy publicl...

Ayling, B. and Hinz, N. Great Basin Center for Geothermal Energy

Apr 05, 2020
7 Resources
0 Stars
Publicly accessible

McGee Mountain Geoprobe Study, Humboldt County, Nevada

Geoprobes were developed by the environmental industry to collect water, gas and soil samples from contaminated sites at shallow depths (10-40 meters), with a minimum of environmental disturbance. A modified Geoprobe was used to collect bottom hole temperatures, and attempt to col...

Tullar, K. Geothermal Technical Partners, Inc.

Jun 19, 2010
3 Resources
0 Stars
Publicly accessible

McGee Mountain Geoprobe Survey, Humboldt County, Nevada

This shapefile contains location and attribute data for a Geoprobe temperature survey conducted by Geothermal Technical Partners, Inc. during 2010. The purpose of direct push technology (DPT) probe activity at the McGee Mtn. Project, Nevada was to 1) determine bottom hole temperat...

Zehner, R. Geothermal Technical Partners, Inc.

Jun 01, 2010
2 Resources
0 Stars
Publicly accessible

<< Previous 5 6 7 8 9 10 11 12 13 Next >>