Search OEDI Data

Thermal-Hydrological-Mechanical Modelling of Stockton University Reservoir Cooling System, Fine Scale Stress Test Modelling

Mesh, properties, initial conditions, injection/withdrawal rates for modelling thermal, hydrological, and mechanical effects of fluid injection to and withdrawal from ground for Stockton University reservoir cooling system (aquifer storage cooling system), Galloway, New Jersey, fo...

Smith, J. et al Lawrence Berkeley National Laboratory

Feb 22, 2021
14 Resources
0 Stars
Publicly accessible

Community Geothermal: Final Thermal Conductivity Test Report and Data Logs Carbondale, CO

Provided here are a final thermal conductivity test report, a drilling log, and a heat rejection log from Carbondale, CO. Also attached is a report made before drilling, which contains predictions on the hydrogeologic conditions of the drill site. The forty-eight (48.9) hour in-si...

Ewbank, G. et al Clean Energy Economy for the Region (CLEER)

Oct 20, 2023
4 Resources
0 Stars
Publicly accessible

Utah FORGE: Wells 16A(78)-32 and 16B(78)-32 Extended Circulation Test Data August and September 2024

The dataset includes data collected during an extended circulation test conducted at the Utah FORGE site between August 8 and September 5, 2024. It provides uncorrected, raw digital data from the test, along with calibration information and a final report detailing the test proced...

McLennan, J. et al Energy and Geoscience Institute at the University of Utah

Oct 11, 2024
1 Resources
0 Stars
Publicly accessible

Distributed Acoustic Sensing (DAS) Data for Periodic Hydraulic Tests

California State University Long Beach evaluated hydraulic connectivity among geothermal wells using Periodic Hydraulic Testing (PHT) and Distributed Acoustic Sensing (DAS). The principal was to create a pressure signal in one well and observe the responding pressure signals in on...

Coleman, T. and Becker, M. California State University

Jul 06, 2017
35 Resources
0 Stars
Publicly accessible

Shallow (2-meter) Temperature Surveys in Colorado

Shallow temperature surveys are useful in early-stage geothermal exploration to delineate surface outflow zones, with the intent to identify the source of upwelling, usually a fault. Detailed descriptions of the 2-meter survey method and equipment design can be found in Coolbaugh ...

E., R. Flint Geothermal, LLC

Feb 01, 2012
1 Resources
0 Stars
Publicly accessible

High Temperature Chemical Sensing Tool: Preliminary pH and reference electrode test results

Project: High Temperature Chemical Sensing Tool for Distributed Mapping of Fracture Flow in EGS. Preliminary pH and reference electrode test results.

Cieslewski, G. Sandia National Laboratories

Sep 30, 2014
6 Resources
0 Stars
Publicly accessible

Analysis of downhole data from USU-1 well Leidos Technical Report

USU Camas-1 is a geothermal test well drilled in Camas Prairie, Idaho, in the Summer and Fall of 2018. The purpose of this test well was to validate Play Fairway methodologies of the Snake River Plain Play Fairway Analysis project. In this report, test data are analyzed to infer...

Garg, S. and Goranson, C. Utah State University

Dec 04, 2018
1 Resources
0 Stars
Publicly accessible

Images of Fracture Sustainability Test on Stripa Granite

Images of the Stripa Granite core before and after the fracture sustainability test. Photos of fracture faces of Stripa Granite core.

Kneafsey, T. Lawrence Berkeley National Laboratory

May 11, 2014
2 Resources
0 Stars
Publicly accessible

Microhole Test Data

Drilling results from the microhole project at the Sandia High Operating Temperature test facility. The project is seeking to help reduce the cost of exploration and monitoring of geothermal wells and formations by drilling smaller holes. The tests were part of a control algorith...

Su, J. Sandia National Laboratories

May 23, 2016
5 Resources
0 Stars
Publicly accessible

Utah FORGE: RESMAN Well 16A(78)-32 and 16B(78)-32 Stimulation and Circulation Tracer Test Results 2024

This dataset contains tracer test results from stimulation and circulation experiments conducted on the Utah FORGE wells 16A(78)-32 and 16B(78)-32 during 2024. The data was collected by RESMAN Energy Technology and includes detailed tracer analysis from flowback, short and extende...

Hartvig, S. et al RESMAN Energy Technology

Jan 14, 2025
1 Resources
0 Stars
Publicly accessible

SiC Diode Test Data

Fabricated SiC diodes are tested in the temperature range of 300 degrees C to 600 degrees C.

Gilbert, G. Sandia National Laboratories

Aug 01, 2014
1 Resources
0 Stars
Publicly accessible

USU Camas-1 Test Well: Documentation

This submission contains documents that describe the USU Camas-1 test well, drilled in Camas Prairie, Idaho, in Fall 2018 and Fall 2019. The purpose of this well is to validate exploration methodologies of the Snake River Plain (SRP) Play Fairway Analysis (PFA) project.

Shervais, J. Utah State University

Oct 31, 2018
13 Resources
0 Stars
Publicly accessible

EGS-Collab Experiment 1: Time-lapse ERT Data and E4D Inversion Files for 10-24-2018 through 11-07-2018 Flow Test

This data submission includes the raw time-lapse ERT (electrical resistivity tomography) monitoring data, flow system data, operator logs, E4D (https://e4d.pnnl.gov) inversion files, and metadata necessary to reproduce the 4D ERT inversion for the Oct. 24 through Nov. 7 2018 post-...

Johnson, T. Pacific Northwest National Laboratory

Jul 30, 2021
5 Resources
0 Stars
Publicly accessible

Fracture Sustainability Pressure, Temperature, Differential Pressure, and Aperture Closure Data

In these data sets, the experiment time, actual date and time, room temperature, sample temperature, upstream and downstream pressures (measured independently), corrected differential pressure (measured independently and corrected for offset and room temperature) indication of ape...

Kneafsey, T. Lawrence Berkeley National Laboratory

Sep 30, 2016
5 Resources
0 Stars
Publicly accessible

Utah FORGE: Wells 16A(78)-32 and 16B(78)-32 Stimulation Pressure and Circulation Data April, 2024

This dataset consists of all of the pressure pumping data for Utah FORGE Well16A78-32 fracturing stages, Well 16B78-32 fracturing stages, and a 9-hour circulation test which took place after all of the frac plugs were drilled out. Fracturing in the wells took place in stages from ...

England, K. Energy and Geoscience Institute at the University of Utah

Jun 03, 2024
4 Resources
0 Stars
Publicly accessible

West Flank Coso, CA FORGE Test Area

A map with the Coso West Flank FORGE test area outlined, along with regional seismicity, the aeromagnetic data set and the area currently being utilized for the creation of the 3D model.

Blankenship, D. Sandia National Laboratories

Nov 15, 2015
1 Resources
0 Stars
Publicly accessible

Pressure Data from Cranfield CO2 Thermosiphon Test

Pressure data acquired in well F2 and F3 during the CO2 geothermal thermosiphoning test, Cranfield MS.

Freifeld, B. Lawrence Berkeley National Laboratory

Jan 21, 2015
2 Resources
0 Stars
Publicly accessible

EGS Collab: Modeling and Simulation Working Group Teleconference Series (99-128)

This submission contains the presentation slides and recordings from EGS Collab Modeling and Simulation Working Group (MSWG) teleconferences number 99 through 128. These teleconferences served three objectives for the project: 1) share simulation results, 2) communicate field acti...

White, M. et al Pacific Northwest National Laboratory

Jun 07, 2022
31 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16A(78)-32 Stimulation Tracer Test Results

This archive contains data from the tracer test performed during the Utah FORGE well 16A(78)-32 stimulation. This includes: 1. the raw data file from Pason in the csv format; 2. a one-page Word document from Pason that explains the headers and units used in their data file; 3. an...

Rose, P. and Barker, B. Energy and Geoscience Institute at the University of Utah

Sep 16, 2022
1 Resources
0 Stars
Publicly accessible

First Tracer Test After Circulation in Desert Peak 27-15

Following the successful stimulation of Desert Peak target EGS well 27-15, a circulation test was initiated by injecting a conservative tracer (1,5-nds) in combination with a reactive tracer (7-amino-1,3-naphthalene disulfonate). The closest production well 74-21 was monitored ove...

Rose, P. University of Utah

Nov 16, 2013
1 Resources
0 Stars
Publicly accessible

Test Report for Detonation Velocity Measurements

Test report for detonation velocity measurements. A series of tests were conducted to determine reaction rate and general behavior of aluminum (AL) and magnesium (MG) powder mixtures (metalized explosives) with Bullseye double-base smokeless propellant. Given the indeterminate sen...

Grubelich, M. Sandia National Laboratories

Jan 13, 2014
1 Resources
0 Stars
Publicly accessible

Shaker Test Results Comparing Rare Earth Element Sorption Between Natural and Doped Simulated Geothermal Brine

Shaker test data comparing rare earth element (REE) sorption onto Tusaar media between one natural geothermal brine and two simulated brines doped with known mineral concentrations.

Stull, D. Tusaar Corp.

May 24, 2016
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 16B(78)-32 Post Hydraulic Fracturing 9 Hour Dual Well Circulation Test Fiber Optic Monitoring Report April 2024

This report examines the fiber optic measurements made on the Utah FORGE well 16B(78)-32 after it and well 16A(78)-32 were hydraulically stimulated and shortly thereafter a 9 hour cross well circulation test was run between them. The report reviews distributed fiber optic signal p...

Guzik, A. and Davidson, E. Neubrex Energy Services (US), LLC

Apr 27, 2024
1 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2417: Pulsed Interference Tests at Wells 16A(78)-32 and 16B(78)-32 September 2024

This archive contains data and a report from Pulse Interference Tests (PITs), which were conducted on September 4, 2024, immediately following a 30-day recirculation test at the Utah FORGE site. Injection and backflow were induced in well 16A(78)-32 while pressures were measured i...

W Becker, M. et al Rice University

Mar 18, 2025
3 Resources
0 Stars
Publicly accessible

Microcosm Shaker Test for Determining the Amount of Ligand Bleed from Media #1 at Various Temperatures and pH's

This PDF outlines the experiments for determining the amount of ligand bleed from our Media #1 at various temperatures and pH's.

Garland, G. Tusaar Corp.

Sep 18, 2015
1 Resources
0 Stars
Publicly accessible

<< Previous 1 2 3 4 5 6 7 8 Next >>