Search OEDI Data

Strength Recovery of Cement Composites in Steam and Carbonate Environments

The data include compressive strength and Young's Modulus recoveries in steam and carbonate environments at 270 deg C for four chemically different cement composites after imposed controlled damaged.

Butcher, T. Brookhaven National Laboratory

Apr 28, 2016
1 Resources
0 Stars
Publicly accessible

Illite Dissolution Rates and Equation (100 to 280 deg C)

The objective of this suite of experiments was to develop a useful kinetic dissolution expression for illite applicable over an expanded range of solution pH and temperature conditions representative of subsurface conditions in natural and/or engineered geothermal reservoirs. Usi...

Carroll, S. Lawrence Livermore National Laboratory

Oct 17, 2014
1 Resources
0 Stars
Publicly accessible

Comparison of Rare Earth Element Sorption Between Fresh and Partially Loaded Media Using Simulated Geothermal Brine

A study comparing the REE sorption characteristics of fresh ligand-based sorption media and media partially loaded with REEs when exposed to a simulated geothermal brine with known mineral concentrations, REE7. Sorption rates were tested using microcosm shaker tests. Results sugg...

Stull, D. Tusaar Corp.

May 24, 2016
1 Resources
0 Stars
Publicly accessible

PoroTomo Distributed Temperature Sensing (DTS) Measurements made in Brady Observation Well 56-1

This submission is a follow-up to Distributed Temperature Sensing (DTS) measurements made in Brady observation well 56-1 during the PoroTomo field experiment conducted in March, 2016. The measurements in this data set were made on August 24, 2018 over an approximately 20 hour per...

Kratt, C. et al Oregon State University

Jan 09, 2019
6 Resources
0 Stars
Publicly accessible

EGS Collab: Hydraulic Fracturing Test Measurements on the 4100L of SURF

This package includes data from two days of testing at the Sanford Underground Research Facility (SURF) on the 4100 level. The tests were performed in borehole TV4100 in the battery charging alcove south of the Yates shaft. TV4100 is a vertical borehole ~50 meters deep. A series o...

Ingraham, M. et al Sandia National Laboratories

Aug 15, 2019
3 Resources
0 Stars
Publicly accessible

DCIF (Directional Cooling-Induced Fracturing) Westerly Granite AE Borehole Damage Effect Test (Task 3-0)

Directional Cooling-Induced Fracturing (DCIF) experiments were conducted on three rectangular Westerly granite blocks (width=depth=4.0", height=2.0") which were preheated to 200, 400, and 600 degree C to induce damage (microcracks) with varying degrees. Liquid nitrogen was poured...

Nakagawa, S. Lawrence Berkeley National Laboratory

Jan 27, 2022
13 Resources
0 Stars
Publicly accessible

Improved Rare Earth Element Sorption from Simulated Geothermal Brines: Effect of Gassed versus Degassed Brines

A study exploring sorption and stripping characteristics of sorption media when simulated geothermal brines are degassed or not degassed. Experiments were done at 70degC. The brines used in this study were formulated by Tusaar. The two brines used/simulated are labeled 1M and 1C...

Stull, D. Tusaar Corp.

May 24, 2016
2 Resources
0 Stars
Publicly accessible

Sample Data from a Distributed Acoustic Sensing Experiment at Garner Valley, California

In September 2013, an experiment using Distributed Acoustic Sensing (DAS) was conducted at Garner Valley, a test site of the University of California Santa Barbara (Lancelle et al., 2014). This submission includes one 45 kN shear shaker (called "large shaker" on the basemap) test ...

Lancelle, C. University of Wisconsin

Sep 10, 2013
10 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: Earth Model Input Files

The EGS Collab is conducting experiments in hydraulic fracturing at a depth of 1.5 km in the Sanford Underground Research Facility (SURF) on the 4850 Level. A total of eight ~60m-long subhorizontal boreholes were drilled at that depth on the western rib of the West Access Drift. S...

Neupane, G. and Sigma-V, T. Idaho National Laboratory

Dec 19, 2019
6 Resources
0 Stars
Publicly accessible

Utah FORGE: Triaxial Direct Shear Results

This submission contains a report and associated data from triaxial direct shear tests conducted by Los Alamos National Laboratory. The samples used were sourced from 16A(78)-32 well core. The primary objectives of this test were to determine the shear strength in both intact an...

Frash, L. et al Los Alamos National Laboratory

Aug 14, 2023
1 Resources
0 Stars
Publicly accessible

Active Source Seismic (Ultrasonic) Data from Double-Direct Shear Lab Experiments

Active source ultrasonic data from lab experiments p5270 and p5271 including raw waveforms (WF) and mechanical data (mat). From the PSU team working on the "Machine Learning Approaches to Predicting Induced Seismicity and Imaging Geothermal Reservoir Properties" project. The fric...

Marone, C. Pennsylvania State University

May 05, 2021
1 Resources
0 Stars
Publicly accessible

WHOLESCALE: Seismic Survey Metadata from San Emidio Nevada 2021

This is a collection of metadata from the 2021 seismic survey at the San Emidio geothermal field in Nevada. In April and May 2021, 37 tri-axial short period seismographs were deployed in a 1.8km diameter cluster centered on 40.367278 deg N, 119.409019 deg W. The first data record...

Lord, N. et al Department of Geoscience University of Wisconsin-Madison

Apr 06, 2021
10 Resources
0 Stars
Publicly accessible

Testing for Controlled Rapid Pressurization

Borehole W1 is a NQ core hole drilled at our test site in Socorro. The rock is rhyolite. Borehole W1 which was used to test gas-gas explosive mixtures is 55 feet deep with casing (pinkish in the drawing) set to 35 feet. The model is a representation of the borehole and the hol...

Knudsen, S. Sandia National Laboratories

Sep 03, 2014
1 Resources
0 Stars
Publicly accessible

Water chemistry data and calculations for Fracture Sustainability Tests

Measured cation, anion, and silica are presented as well as calculations evaluating mass balance performed for 4 fracture sustainability tests under EGS conditions: Stripa granite, Metamudstone, Rhyolitic Ashflow Tuff, and Silicified Rhyolitic Tuff. Calculations of charge balance ...

Kneafsey, T. et al Lawrence Berkeley National Laboratory

Sep 30, 2020
2 Resources
0 Stars
Publicly accessible

1D Heat Loss Models Validation Experiment

Contains data from the model validation in the 1D Heat Loss Models to Predict the Aquifer Temperature Profile during Hot/Cold Water Injection Project. The data include two COMSOL models (2D axisymmetric benchmark model and 2D Vinsome model), one python code (1D Vinsome based FEM n...

Chen, K. et al UC Berkeley

Jan 18, 2022
8 Resources
0 Stars
Publicly accessible

Rare Earth Adsorption and Desorption with PEGDA Beads

We synthesized PEGDA polymer hydrogel beads for cell embedding and compared REE biosorption with these beads via a gravity-driven flow through setup. One way to set up a flow through system is by cell encapsulation into polymer beads with a column setup similar to that used in th...

Jiao, Y. et al Lawrence Livermore National Laboratory

Mar 01, 2017
1 Resources
0 Stars
Publicly accessible

Summary of Cement Formulations Tested by BNL for Self-Healing Ability Tests Conditions and Data

A table of cement formulations tested by Brookhaven National Laboratory in 2016-2017 in the frame of the "Self-healing and Re-Adhering Cements with Improved Toughness at Casing and Formation Interfaces for Geothermal Wells" project.

Sugama, T. Brookhaven National Laboratory

Sep 27, 2017
2 Resources
0 Stars
Publicly accessible

WHOLESCALE: Seismic Survey Data from San Emidio Nevada 2021

This dataset includes raw and processed seismic data from the 2021 seismic survey at the San Emidio geothermal field in Nevada. In April and May 2021, 37 tri-axial short period seismographs were deployed in a 1.8km diameter cluster centered on 40.367278 N, 119.409019 W. The first...

Lord, N. et al University of Wisconsin-Madison

Apr 06, 2021
6 Resources
0 Stars
Publicly accessible

Chemical, Calcium Phosphate Cements for Geothermal Wells Corrosion Protection, Bond Strength and Matrix Self-Healing

The data set shows performance of economical calcium phosphate cement (Fondu) blended with fly ash, class F (FAF) in carbon steel corrosion protection tests (corrosion rate, corrosion current and potential), bond and matrix strength, as well as matrix strength recovery after impos...

Sugama, T. Brookhaven National Laboratory

Sep 26, 2017
2 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: Tracer data tests

This file contains the first set of tracer data for the EGS Collab testbed. The first set of tracer tests were conducted during October-November, 2018. We have included tracer data for C-dots, chloride, fluorescein, and rhodamine-B. The details about the tracer test can be found i...

Neupane, G. et al Idaho National Laboratory

Apr 16, 2019
3 Resources
0 Stars
Publicly accessible

Repetitive Regeneration of Media 1 after REE Sorption from Brine 1 at 70C

This dataset shows the ability of media #1 to be loaded with REE's, stripped of the REE's sequestered, regenerated, and reused over many cycles.

Garland, G. Tusaar Corp.

Jul 23, 2015
3 Resources
0 Stars
Publicly accessible

EGS-Collab Experiment 1: Time-lapse ERT Data and E4D Inversion Files for 10-24-2018 through 11-07-2018 Flow Test

This data submission includes the raw time-lapse ERT (electrical resistivity tomography) monitoring data, flow system data, operator logs, E4D (https://e4d.pnnl.gov) inversion files, and metadata necessary to reproduce the 4D ERT inversion for the Oct. 24 through Nov. 7 2018 post-...

Johnson, T. Pacific Northwest National Laboratory

Jul 30, 2021
5 Resources
0 Stars
Publicly accessible

Snake River Plain FORGE: Site Characterization Data

The site characterization data used to develop the conceptual geologic model for the Snake River Plain site in Idaho, as part of phase 1 of the Frontier Observatory for Research in Geothermal Energy (FORGE) initiative. This collection includes data on seismic events, groundwater,...

Moos, D. and Barton, C. Idaho National Laboratory

Apr 18, 2016
49 Resources
0 Stars
Publicly accessible

Utah FORGE Development of a Reservoir Seismic Velocity Model and Seismic Resolution Study

This is data from and a final report on the development of a 3D velocity model for the larger FORGE area and on the seismic resolution in the stimulated fracture volume at the bottom of well 16A-32. The velocity model was developed using RMS velocities of the seismic reflection su...

Vasco, D. and Chan, C. Array Information Technology

Apr 30, 2022
2 Resources
0 Stars
Publicly accessible

Snake River Plain FORGE: Well Data for WO-2

Well data for the WO-2 well located in eastern Snake River Plain, Idaho. This data collection includes lithology reports, borehole logs, temperature at depth data, neutron density and gamma data, and rock strength parameters for the WO-2 well. This collection of data has been ass...

Podgorney, R. Idaho National Laboratory

Jul 29, 1991
9 Resources
0 Stars
Publicly accessible

<< Previous 1 2 3 4 5 6 7 8 Next >>