Search OEDI Data

Showing results 501 - 525 of 1296.
Show results per page.
Order by:
Available Now:
Research Areas
Accessibility
Data Type
Organization
Source
"at-sea"×

Utah FORGE: 2023 Induced Seismicity Mitigation Plan

This is the updated Utah FORGE Phase 3B induced seismicity mitigation plan (ISMP) covering the general Utah FORGE area. This new version incorporates newly collected seismic data, including data collected during the 2022 stimulation and a probabilistic seismic hazard assessment (...
Pankow, K. et al University of Utah Seismograph Stations
Aug 09, 2023
1 Resources
0 Stars
Publicly accessible

Using Fully Coupled Hydro-Geomechanical Numerical Test Bed to Study Reservoir Stimulation with Low Hydraulic Pressure

This paper documents our effort to use a fully coupled hydro-geomechanical numerical test bed to study using low hydraulic pressure to stimulate geothermal reservoirs with existing fracture network. In this low pressure stimulation strategy, fluid pressure is lower than the minimu...
Fu, P. et al Lawrence Livermore National Laboratory
Jan 31, 2012
2 Resources
0 Stars
Publicly accessible

A Class III Cultural Resources Inventory of Proposed Roads and Drill Pads for the McGee Mountain Geothermal Project, Humboldt County, Nevada

From July 20th to July 22nd, 2010, Chambers Group personnel conducted a cultural resources inventory of the project area. The recordation and inventory resulted in the recordation a single newly identified prehistoric site (CrNV-2-9605) and five isolated finds (CrNV-2-1490 to 1494...
Zehner, R. Geothermal Technical Partners, Inc.
Aug 10, 2010
1 Resources
0 Stars
Publicly accessible

SOLTHERM Thermodynamic Database for Geochemical Modeling

This data submission is a link to a thermodynamic database maintained by the University of Oregon. The data at this link are not 'data results' from sampling. The data at this link comprise a thermodynamic database for aqueous species, minerals, and gases, including data for stoic...
Palandri, J. University of Oregon
Oct 07, 2015
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Milford Site Location, Seismometer Locations, Basin Depth Models, and Potentiometric Contours

This submission includes the geographic extent shapefile of the Milford FORGE site located in Utah, along with a shapefile of seismometer positions throughout the area, and models of basin depth and potentiometric contours.
Moore, J. Energy and Geoscience Institute at the University of Utah
Mar 09, 2016
4 Resources
0 Stars
Publicly accessible

Brine Geochemistry from Soda Geyser, Idaho

These brine samples are collected from the Soda Geyser (a thermal feature, temperature ~30 C) in Soda Springs, Idaho. These samples also represent the overthrust brines typical of oil and gas plays in western Wyoming. Samples were collected from the source and along the flow chan...
Neupane, G. and McLing, T. University of Wyoming
Apr 01, 2017
1 Resources
0 Stars
Publicly accessible

India Direct Normal & Global Horizontal Irradiance Solar Resources

GIS data for India's direct normal irradiance (DNI) and global horizontal irradiance. Provides 10-kilometer (km) solar resource maps and data for India. The 10-km hourly solar resource data were developed using weather satellite (METEOSAT) measurements incorporated into a site-...
Lopez, A. and Laboratory, N. National Renewable Energy Laboratory
Nov 25, 2014
4 Resources
0 Stars
In curation

Wind Resources by Class and Country At 50m

These estimates are derived from a composite of high resolution wind resource datasets modeled for specific countries with low resolution data originating from the National Centers for Environmental Prediction (United States) and the National Center for Atmospheric Research (Unite...
Heimiller, D. and Laboratory, N. National Renewable Energy Laboratory
Nov 25, 2014
4 Resources
0 Stars
In curation

EGS Collab Experiment 1: Accelerometer orientations

Document describing the methodology used to determine the accelerometers' three-component orientations at the first EGS Collab testbed using Continuous Active-Source Seismic Monitoring (CASSM) data and hodogram analysis. Original submission: gdr.openei.org/submissions/1166
Hopp, C. et al Lawrence Berkeley National Laboratory
Aug 19, 2020
2 Resources
0 Stars
Publicly accessible

Wind Turbine / Reviewed Data

**Overview** The SUMR-D CART2 turbine data are recorded by the CART2 wind turbine's supervisory control and data acquisition (SCADA) system for the Advanced Research Projects Agency–Energy (ARPA-E) SUMR-D project located at the National Renewable Energy Laboratory (NREL) Flatir...
Scholbrock, A. Wind Energy Technologies Office (WETO)
Oct 04, 2019
1 Resources
0 Stars
Publicly accessible

Sodar NREL Scintec MFAS Wind Profiler, Decker Ranch Airstrip Raw Data

**Overview** The dataset includes 15-minute average wind speed and direction records from 30 m to 330 m above ground level (AGL) in 10-m range gates. Data were collected by a Scintec MFAS wind profiler installed at the Decker Ranch in Oregon, about 4.4 km southeast of Kent, Ore.,...
Jager, D. and Scott, G. Wind Energy Technologies Office (WETO)
Oct 27, 2015
1 Resources
0 Stars
Publicly accessible

Sodar NREL Scintec MFAS Wind Profiler, Decker Ranch Airstrip Reviewed Data

**Overview** The dataset includes 15-minute average wind speed and direction records from 30 m to 330 m above ground level (AGL) in 10-m range gates. Data were collected by a Scintec MFAS wind profiler installed at the Decker Ranch in Oregon, about 4.4 km southeast of Kent, Ore.,...
Jager, D. and Scott, G. Wind Energy Technologies Office (WETO)
Nov 19, 2015
1 Resources
0 Stars
Publicly accessible

Utah FORGE: TEM and Gravity Data

This submission includes a gravity data in text format and as a GIS point shapefile and transient electromagnetic (TEM) raw data. Each text file additionally contains location data (UTM Zone 12, NAD83) and elevation (meters) data for that station. The gravity data shapefile was i...
Hardwick, C. and Nash, G. Energy and Geoscience Institute at the University of Utah
Feb 05, 2018
3 Resources
0 Stars
Publicly accessible

National Biorefineries Database

This phase of the project began with the development of a geodatabase with the focus predominantly on Ethanol. The task involved collection of data on ethanol production locations, transportation networks, production and storage capacities, transloading and blending locations and ...
Peterson, S. and Laboratory, O. Oak Ridge National Laboratory
Nov 25, 2014
1 Resources
0 Stars
In curation

City and County Commercial Building Inventories

The Commercial Building Inventories provide modeled data on commercial building type, vintage, and area for each U.S. city and county. Please note this data is modeled and more precise data may be available through county assessors or other sources. Commercial building stock data ...
Day, M. et al National Renewable Energy Laboratory
Apr 01, 2020
9 Resources
0 Stars
Curated

City and County Energy Profiles

The City and County Energy Profiles lookup table provides modeled electricity and natural gas consumption and expenditures, on-road vehicle fuel consumption, vehicle miles traveled, and associated emissions for each U.S. city and county. Please note this data is modeled and more p...
Day, M. National Renewable Energy Laboratory
Dec 20, 2019
5 Resources
1 Stars
Curated

2023 National Offshore Wind data set (NOW-23)

The 2023 National Offshore Wind data set (NOW-23) is the latest wind resource data set for offshore regions in the United States, which supersedes, for its offshore component, the Wind Integration National Dataset (WIND) Toolkit, which was published about a decade ago and is curre...
Bodini, N. et al National Renewable Energy Laboratory
Jan 01, 2020
21 Resources
1 Stars
Curated

Chemistry of the thermal water samples of the Camas Prairie area in Idaho, USA

This dataset includes chemistry of geothermal water samples of the Camas Prairie area in Idaho. The samples included in this dataset were collected over the period of 2016-2019. Collection/analysis of new water samples and compilation of existing water chemistry database were cond...
Neupane, G. et al Idaho National Laboratory
Sep 30, 2020
1 Resources
0 Stars
Publicly accessible

Utah FORGE GeoThermOPTIMAL Video

This is a project description video by Dr. William W. Fleckenstein related to their "Development of Multi-Stage Fracturing System and Wellbore Tractor to Enable Zonal Isolation During Stimulation and EGS Operations in Horizontal Wellbores" R&D project at Utah FORGE which is linked...
Fleckenstein, W. Colorado School of Mines
Dec 12, 2022
2 Resources
0 Stars
Publicly accessible

Performance Data from a 1-Meter Cross-flow Turbine with High Deflection Hydrofoils

Performance data of a 1-meter diameter cross-flow tidal turbine consisting of three NACA 0018 blades with two support struts with high deflection hydrofoils. Data was collected at the University of New Hampshire Jere A. Chase Ocean Engineering Lab within the tow tank. Three turbin...
Marone, N. et al University of New Hampshire, Atlantic Marine Energy Center (AMEC)
Jul 21, 2021
2 Resources
0 Stars
Publicly accessible

Geomechanical Modeling for Thermal Spallation Drilling

Wells for Engineered Geothermal Systems (EGS) typically occur in conditions presenting significant challenges for conventional rotary and percussive drilling technologies: granitic rocks that reduce drilling speeds and cause substantial equipment wear. Thermal spallation drilling,...
Walsh, S. et al Lawrence Livermore National Laboratory
Aug 24, 2011
1 Resources
0 Stars
Publicly accessible

UAE6 Wind Tunnel Tests Data UAE6 Sequence 4 Raw Data

**Overview** Sequence 4: Static Pressure Calibration (P) This test sequence used a downwind, teetered turbine with a 3.4° cone angle. The wind speed ranged from 5 m/s to 25 m/s. Yaw angles of 0° to 30° were achieved. The blade tip pitch was 3°. The rotor rotated at 72 RPM. B...
Fingersh, L. Wind Energy Technologies Office (WETO)
Nov 28, 2018
1 Resources
0 Stars
Publicly accessible

UAE6 Wind Tunnel Tests Data UAE6 Sequence 6 Raw Data

**Overview** Sequence 6: Shroud Wake Measure (P) This test sequence used a downwind, rigid turbine with a 3.4° cone angle. The wind speeds for this sequence corresponded to subcritical [7 m/s], transitional [15 m/s], and supercritical [20 m/s] Reynolds number regimes for the ci...
Fingersh, L. Wind Energy Technologies Office (WETO)
Nov 28, 2018
1 Resources
0 Stars
Publicly accessible

UAE6 Wind Tunnel Tests Data UAE6 Sequence F Raw Data

**Overview** Sequence F: Downwind High Cone (F) This test sequence used a downwind, rigid turbine with an 18° cone angle. The wind speed ranged from 10 m/s to 20 m/s. Excessive inertial loading due to the high cone angle prevented operation at lower wind speeds. Yaw angles of Â...
Fingersh, L. Wind Energy Technologies Office (WETO)
Nov 27, 2018
1 Resources
0 Stars
Publicly accessible

Lidar HilFlowS LLNL ZephIR300 MOP Processed Data

**Overview** The ZephIR300 is a continuous wave LIDAR with a range of 10 m to 300 m. During HilFlowS the ZephIR300 was programmed to measure from 10 m to 150 m. In addition, the ZephIR300 provided a measurement at 1 m height using an onboard meteorological sensor. The ZephIR300 ...
Wharton, S. and , . Wind Energy Technologies Office (WETO)
Jul 07, 2019
1 Resources
0 Stars
Publicly accessible
<< Previous16171819202122232425Next >>