Search OEDI Data

Post-Test SEM Examination of Brady Core, Desert Peak Core, and Stripa Granite Samples

As part of the shear-induced permeability test of Brady well BCH-03, Desert Peak well DP 35-13, and Stripa granite samples, the three post-test (reacted) rock samples were examined using a Scanning Electron Microscope (SEM). The SEM images of the core and elemental analysis are in...

Kneafsey, T. et al Lawrence Berkeley National Laboratory

Dec 23, 2015
4 Resources
0 Stars
Publicly accessible

Seismic Analysis of Spatio-Temporal Fracture Generation During EGS Resource Development Full Moment Tensors and Stress Inversion Catalogs

This submission contains 167 full moment tensor (MT) solutions for the seismicity observed two years prior and three years post start of injection activities. Also included are the azimuth and plunge angles for the three main stress directions sigma1, sigma 2 and sigma 3 at the P...

Gritto, R. et al Array Information Technology

Sep 26, 2018
2 Resources
0 Stars
Publicly accessible

Regional Slip Tendency Analysis of the Great Basin Region

Slip and dilation tendency on the Great Basin fault surfaces (from the USGS Quaternary Fault Database) were calculated using 3DStress (software produced by Southwest Research Institute). Slip and dilation tendency are both unitless ratios of the resolved stresses applied to the f...

E., J. University of Nevada

Sep 30, 2013
1 Resources
0 Stars
Publicly accessible

Utah FORGE Well 16A(78)-32 Stimulation Data (April, 2022)

This is a set of data related to the stimulation program at Utah FORGE well 16A(78)-32 during April, 2022. This includes daily reports, 1 second Pason data, tracer data, and shear stimulation data and information including a report of an evolving prognosis for the stimulation oper...

McLennan, J. Energy and Geoscience Institute at the University of Utah

May 18, 2022
11 Resources
0 Stars
Publicly accessible

Utah FORGE: Roosevelt Hot Springs Analytical Well-Based Temperature Model Data

This submission contains a cumulative record of one-dimensional temperature modeling based off of well data in the vicinity of the Utah FORGE site. Temperature log data from wells used, and in some cases were extrapolated below the bottom of a number of wells. The data were corre...

Podgorney, R. and Allis, R. Idaho National Laboratory

Dec 07, 2018
2 Resources
0 Stars
Publicly accessible

Tularosa Basin Play Fairway Analysis: Partial Basin and Range Heat and Zones of Critical Stress Maps

Interpolated maps of heat flow, temperature gradient, and quartz geothermometers are included as TIF files. Zones of critical stress map is also included as a TIF file. The zones are given a 5km diameter buffer. The study area is only a part of the Basin and Range, but it does inc...

Brandt, A. University of Utah

Nov 15, 2015
4 Resources
0 Stars
Publicly accessible

Wister, CA Downhole and Seismic Data

This submission contains Downhole geophysical logs associated with Wister, CA Wells 12-27 and 85-20. The logs include Spontaneous Potential (SP), HILT Caliper (HCAL), Gamma Ray (GR), Array Induction (AIT), and Neutron Porosity (NPOR) data. Also included are a well log, Injection T...

Akerley, J. Ormat Nevada Inc

Dec 18, 2010
16 Resources
0 Stars
Publicly accessible

Utah FORGE Core Material Friction Experiments

The following folders contain 3 friction experiments on Utah FORGE core material from depths of 6735 8533ft. The experiment conditions range from 100% relative humidity at room temperature to fluid-saturated at 110C. Experiments were done on both intact samples in a single-direct ...

Marone, C. et al The Pennsylvania State University

Mar 15, 2023
7 Resources
0 Stars
Publicly accessible

Fallon FORGE: Analogue Outcrop Samples

Compilation of results for mechanical and fluid flow properties of analogue outcrop samples experimental data for compressional and shear wave velocities, tensile strengths, and compressive strengths. Outcrop location and sample orientation data are documented in a separate csv file.

Blankenship, D. et al Sandia National Laboratories

Mar 12, 2018
2 Resources
0 Stars
Publicly accessible

Active Source Seismic (Ultrasonic) Data from Double-Direct Shear Lab Experiments

Active source ultrasonic data from lab experiments p5270 and p5271 including raw waveforms (WF) and mechanical data (mat). From the PSU team working on the "Machine Learning Approaches to Predicting Induced Seismicity and Imaging Geothermal Reservoir Properties" project. The fric...

Marone, C. Pennsylvania State University

May 05, 2021
1 Resources
0 Stars
Publicly accessible

Sedimentary Geothermal Feasibility in Nevada, Western Utah, Colorado, and the Gulf Coast Region of Texas Final Report

The objectives of this project were to (1) perform a literature review of sedimentary geothermal resources, (2) identify data sources and develop data-collection methodologies that characterize selected resources, (3) screen sedimentary basins and formations for sedimentary geothe...

Johnston, H. et al National Renewable Energy Laboratory

Jul 01, 2020
1 Resources
0 Stars
Publicly accessible

Devices Suitable for Sectional Isolation Along Both Cased and Open-hole Wellbores Geomechanical Packer Formation Model Iteraction

The main goal of this project is to develop an annular isolation system capable to withstand geothermal downhole conditions and mitigate the problems experienced by conventional packers in FORGE wells. This presentation outlines the work in rock modelling and interaction with the ...

Ghassemi, A. et al Welltec

Jun 20, 2023
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Data for 3-D Model Development Lithology, Temperature, Pressure, and Stress

This submission comprises two downloadable .zip archives. Each archive contains spreadsheets with 3-D data and a .txt document describing the data. The Mesh Files .zip download contains data regarding the lithologic contacts of the granitoid and overlying sedimentary basin fill. T...

Podgorney, R. Idaho National Laboratory

Mar 17, 2020
2 Resources
0 Stars
Publicly accessible

kISMET Final Report and Highlights

The files in this submission describes the results of a series of stress measurement and hydraulic fracturing experiments conducted at the Sanford Underground Research Facility (SURF) in Lead, SD. This report describes the accomplishments of the kISMET (permeability (k) and Induce...

Oldenburg, C. et al Lawrence Berkeley National Laboratory

Oct 31, 2016
2 Resources
0 Stars
Publicly accessible

Water chemistry data and calculations for Fracture Sustainability Tests

Measured cation, anion, and silica are presented as well as calculations evaluating mass balance performed for 4 fracture sustainability tests under EGS conditions: Stripa granite, Metamudstone, Rhyolitic Ashflow Tuff, and Silicified Rhyolitic Tuff. Calculations of charge balance ...

Kneafsey, T. et al Lawrence Berkeley National Laboratory

Sep 30, 2020
2 Resources
0 Stars
Publicly accessible

Finite Element Analysis (FEA) for Water-Foam Fracturing of Granite Rock

In addition to the foam data that were obtained from literature and that were collected from the current study, simulation data was also generated from finite element analysis (FEA) conducted in this study using COMSOL Multiphysics software. The FEA models were built to simulate t...

Thakor, V. et al Temple University

May 04, 2021
1 Resources
0 Stars
Publicly accessible

Washington Play Fairway Analysis Analysis of High Precision GPS Time Series and Strain Rates for the Cascade Range

Global Positioning System (GPS) time series from the National Science Foundation (NSF) Earthscope's Plate Boundary Observatory (PBO) and Central Washington University's Pacific Northwest Geodetic Array (PANGA). GPS station velocities were used to infer strain rates using the "spli...

Swyer, M. AltaRock Energy Inc

Feb 22, 2015
2 Resources
0 Stars
Publicly accessible

Utah FORGE Development of a Reservoir Seismic Velocity Model and Seismic Resolution Study

This is data from and a final report on the development of a 3D velocity model for the larger FORGE area and on the seismic resolution in the stimulated fracture volume at the bottom of well 16A-32. The velocity model was developed using RMS velocities of the seismic reflection su...

Vasco, D. and Chan, C. Array Information Technology

Apr 30, 2022
2 Resources
0 Stars
Publicly accessible

McGee Mountain Geoprobe Study, Humboldt County, Nevada

Geoprobes were developed by the environmental industry to collect water, gas and soil samples from contaminated sites at shallow depths (10-40 meters), with a minimum of environmental disturbance. A modified Geoprobe was used to collect bottom hole temperatures, and attempt to col...

Tullar, K. Geothermal Technical Partners, Inc.

Jun 19, 2010
3 Resources
0 Stars
Publicly accessible

McGee Mountain Geoprobe Survey, Humboldt County, Nevada

This shapefile contains location and attribute data for a Geoprobe temperature survey conducted by Geothermal Technical Partners, Inc. during 2010. The purpose of direct push technology (DPT) probe activity at the McGee Mtn. Project, Nevada was to 1) determine bottom hole temperat...

Zehner, R. Geothermal Technical Partners, Inc.

Jun 01, 2010
2 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: Baseline Cross-well Seismic

As part of the geophysical characterization suite for the first EGS Collab tesbed, here are the baseline cross-well seismic data and resultant models. The campaign seismic data have been organized, concatenated with geometry and compressional (P-) & and shear (S-) wave picks, and ...

Schwering, P. et al Sandia National Laboratories

Apr 30, 2018
9 Resources
0 Stars
Publicly accessible

DCIF Westerly Granite AE Stress Effect Test (Task 3-1)

Directional Cooling-Induced Fracturing (DCIF) experiments were conducted on rectangular Westerly granite blocks (width=depth=4.0", height=2.0"). Liquid nitrogen was poured in a small, 1"-diameter copper cup attached to the top of the sample, and the resulting acoustic emissions (A...

Nakagawa, S. and Trzeciak, M. Lawrence Berkeley National Laboratory

Jul 08, 2021
15 Resources
0 Stars
Publicly accessible

Utah FORGE: Logs and Data from Deep Well 58-32 (MU-ESW1)

Data, logs, and graphics associated with the drilling and testing of Utah FORGE deep test well 58-32 (MU-ESW1) near Roosevelt Hot Springs.

Nash, G. and Moore, J. Energy and Geoscience Institute at the University of Utah

Apr 11, 2018
11 Resources
0 Stars
Publicly accessible

DCIF (Directional Cooling-Induced Fracturing) Westerly Granite AE Borehole Damage Effect Test (Task 3-0)

Directional Cooling-Induced Fracturing (DCIF) experiments were conducted on three rectangular Westerly granite blocks (width=depth=4.0", height=2.0") which were preheated to 200, 400, and 600 degree C to induce damage (microcracks) with varying degrees. Liquid nitrogen was poured...

Nakagawa, S. Lawrence Berkeley National Laboratory

Jan 27, 2022
13 Resources
0 Stars
Publicly accessible

Pressure Data from Cranfield CO2 Thermosiphon Test

Pressure data recorded using PANEX pressure gauges at the bottom of wells CFU31-F2 and CFU31-F3.

Freifeld, B. Lawrence Berkeley National Laboratory

Jan 21, 2015
2 Resources
0 Stars
Publicly accessible

<< Previous 1 2 3 4 5 6 7 Next >>