Search OEDI Data

Showing results 351 - 375 of 1008.
Show results per page.
Order by:
Available Now:
Clear All Filters ×
Research Areas
Accessibility
Data Type
Organization
Source
"North Energy Test Site"×
Geothermal Data Repository (GDR)×

WHOLESCALE: Mass Flux Rates for Wells at San Emidio in December 2016

This dataset provides mass flux rates in kg/s from six (production and injection) wells at San Emidio at minute intervals from December 1, 2016 December 15, 2016. Files for injection wells are named with "IW", for instance "WellIW42-21SI.csv", and include negative flux rates. Fil...
Cardiff, M. et al University of Wisconsin Madison
Dec 01, 2016
2 Resources
0 Stars
Publicly accessible

Dixie Valley Engineered Geothermal System Exploration Methodology Project, Baseline Conceptual Model Report

The Engineered Geothermal System (EGS) Exploration Methodology Project is developing an exploration approach for EGS through the integration of geoscientific data. The Project chose the Dixie Valley Geothermal System in Nevada as a field laboratory site for methodlogy calibration...
Iovenitti, J. AltaRock Energy Inc
May 15, 2013
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Updated Phase 2C Well Location Coordinates

Utah FORGE has been established to develop, test, and improve the technologies and techniques required to develop EGS-type geothermal resources. Drilling of the first of two deep deviated wells, 16A(78)-32, will begin in the second half of 2020. This well will serve as the injecti...
Hardwick, C. Utah Geological Survey
Dec 07, 2020
1 Resources
0 Stars
Publicly accessible

GEOPHIRES Simulations for Deep Direct Use (DDU) Projects

This folder contains the GEOPHIRES codes and input files for running the base case scenarios for the six deep direct-use (DDU) projects. The six DDU projects took place during 2017-2020 and were funded by the U.S. Department of Energy Geothermal Technologies Office. They investiga...
Beckers, K. National Renewable Energy Laboratory
Jun 30, 2020
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Induced Seismicity Mitigation Plan

This is the current induced seismicity mitigation plan (ISMP) for the Utah FORGE project. Information that was collected during Phases 1 and 2 of the Utah FORGE project has been incorporated, as have literature searches and risk assessments. The purpose of this report is to identi...
Utah, U. et al Energy and Geoscience Institute at the University of Utah
Dec 30, 2020
2 Resources
0 Stars
Publicly accessible

Colorado Potential Geothermal Pathways

This layer contains the weakened basement rocks. Isostatic gravity was utilized to identify structural basin areas, characterized by gravity low values reflecting weakened basement rocks. Together interpreted regional fault zones and basin outlines define geothermal "exploration f...
E., R. Flint Geothermal, LLC
Feb 01, 2012
1 Resources
0 Stars
Publicly accessible

First Priority Geothermal Target Areas as Identified by ASTER and LANDSAT Thermal Imaging of Parts of Colorado

The CIRES remote sensing unit of the University of Colorado was commissioned by Flint Geothermal LLC to identify areas of warm ground that could signify the thermal signature of "blind" geothermal systems. Using ASTER and LANDSAT data along with other characteristics considered fa...
Hussein, K. Flint Geothermal, LLC
Feb 01, 2012
1 Resources
0 Stars
Publicly accessible

Hawaii Play Fairway Analysis: USGS Quaternary Fault and Fold Database

This database contains information on faults and associated folds in the United States that are believed to be sources of M>6 earthquakes during the Quaternary (the past 1,600,000 years). Maps of these geologic structures are linked to detailed descriptions and references. Used t...
Lautze, N. University of Hawaii
Jan 01, 2015
1 Resources
0 Stars
Publicly accessible

Multiple Data Sets Converge on a Geologic Structural Model for Glass Buttes, Oregon Geothermal Prospect, Patrick Walsh, et al, 2010 American Geophysical Union Poster Session

Multiple data sets converge on a geologic structural model for Glass Buttes, Oregon geothermal prospect, Patrick Walsh, Brigette Martini, Chet Lide, Darrick Boschmann, John DIlles, Andrew Meigs, 2010 Ormat Nevada, Zonge Geophysical, Oregon State University American Geophysical Uni...
Walsh, P. et al Ormat Nevada Inc
Jan 01, 2010
1 Resources
0 Stars
Publicly accessible

Renewable Energy Potential Model: Hawaii Geothermal Supply Curves

This dataset extends the development of the Renewable Energy Potential (reV) model to include geothermal energy, with a specific focus on Hawaii. Provided here are the results of two scenarios that were modeled for geothermal energy in Hawaii: binary enhanced geothermal systems (E...
Trainor-Guitton, W. et al National Renewable Energy Laboratory
Jan 13, 2025
2 Resources
0 Stars
Publicly accessible

Environmental Impact Calculations for Geothermal DDU system on WVU Campus

This dataset contains all the inputs used and output produced from Matlab for the environmental analysis of an improved hybrid geothermal district heating and cooling (GDHC) system with a heat pump, without a heat pump, and for a hot water GDHC. Detailed descriptions of the conten...
Garapati, N. et al West Virginia University
Mar 18, 2020
5 Resources
0 Stars
Publicly accessible

Utah FORGE: 2024 Discrete Fracture Network Model Data

The Utah FORGE 2024 Discrete Fracture Network (DFN) Model dataset provides a set of files representing discrete fracture network modeling for the FORGE site near Milford, Utah. The dataset includes four distinct DFN model file sets, each corresponding to different time frames and ...
Finnila, A. and Jones, C. Energy and Geoscience Institute at the University of Utah
Sep 08, 2024
5 Resources
0 Stars
Publicly accessible

Utah FORGE 2-2439: A Multi-Component Approach to Characterizing In-Situ Stress: Laboratory, Modeling and Field Measurement Workshop Presentation

This is a presentation on A Multi-Component Approach to Characterizing In-Situ Stress at the U.S DOE FORGE EGS Site: Laboratory, Modeling and Field Measurement project by Battelle [Columbus, OH], presented by Mark Kelley. The project's objective was to characterize stress in the U...
Kelley, M. and Bunger, A. Battelle Memorial Institute
Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE 3-2417: Fiber-Optic Geophysical Monitoring of Reservoir Evolution Workshop Presentation

This is a presentation on the Fiber-Optic Geophysical Monitoring of Reservoir Evolution at the Utah FORGE Milford Site project by Rice University, presented by Prof. Jonathan Ajo-Franklin. The project's objective was to develop an end-to-end fiber-optic sensing approach for EGS to...
Ajo-Franklin, J. et al Rice University
Sep 08, 2023
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Stress Ratio Dependence of Ultrasonic Anisotropy in Well 16B(78)-32 Core

This dataset contains high-pressure ultrasonic measurements on a foliated granitoid core from Well 16B(78)-32 at the Utah FORGE site. Ultrasonic P-waves and two orthogonal S-waves were measured concurrently parallel and perpendicular to the rock fabric. All measurements were mad...
Lisabeth, H. and Savage, H. Lawrence Berkeley National Laboratory
Apr 07, 2025
2 Resources
0 Stars
Publicly accessible

DCIF Westerly Granite AE Stress Effect Test (Task 3-1)

Directional Cooling-Induced Fracturing (DCIF) experiments were conducted on rectangular Westerly granite blocks (width=depth=4.0", height=2.0"). Liquid nitrogen was poured in a small, 1"-diameter copper cup attached to the top of the sample, and the resulting acoustic emissions (A...
Nakagawa, S. and Trzeciak, M. Lawrence Berkeley National Laboratory
Jul 08, 2021
15 Resources
0 Stars
Publicly accessible

REopt Lite Geothermal Heat Pump Design Requirements

This document describes the design requirements for the geothermal heat pump (GHP) module being added to the existing REopt Lite web tool. This document describes the purpose, users, and functional requirements to which the modified web tool shall conform. This document will be re...
Olis, D. National Renewable Energy Laboratory
Mar 08, 2021
4 Resources
0 Stars
Publicly accessible

ASTER Thermal Anomalies in Western Colorado

This layer contains the areas identified as areas of anomalous surface temperature from ASTER satellite imagery. The temperature is calculated using the Emissivity Normalization Algorithm that separate temperature from emissivity. Areas that had temperature greater than 2o, and ar...
E., R. Flint Geothermal, LLC
Jan 01, 2013
1 Resources
0 Stars
Publicly accessible

Geothermal Target Areas in Colorado as Identified by Remote Sensing Techniques

This layer contains the areas identified as targets of potential geothermal activity. The Criteria used to identify the target areas include: hot/warm surface exposures modeled from ASTER/Landsat satellite imagery and geological characteristics, alteration mineral commonly associa...
Hussein, K. Flint Geothermal, LLC
Feb 01, 2012
1 Resources
0 Stars
Publicly accessible

Structural Orientations Adjacent to Some Colorado Geothermal Systems

Structural orientations (fractures, joints, faults, lineaments, bedding orientations, etc.) were collected with a standard Brunton compass during routine field examinations of geothermal phenomena in Colorado. Often multiple orientations were taken from one outcrop. Care was taken...
, R. Flint Geothermal, LLC
Feb 01, 2012
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Documentation on Discrete Fracture Network and Fracture Propagation Modelling

This dataset includes reports and a slide presentation on discrete fracture network (DFN) generation and hydraulic fracture modeling at the Utah FORGE site. It details the characterization of natural fractures using well log and core data, as well as stochastic modeling techniques...
Sharma, M. and Cao, M. University of Texas
Feb 07, 2023
1 Resources
0 Stars
Publicly accessible

Understanding Constraints on Geothermal Sustainability Through Reservoir Characterization at Brady Geothermal Field, Nevada

The vast supply of geothermal energy stored throughout the Earth and the exceedingly long time required to dissipate that energy makes the world's geothermal energy supply nearly limitless. As such, this resource holds the potential to provide a large supply of the world's energy ...
Patterson, J. University of Wisconsin
Jul 11, 2018
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase Native State FALCON Model Files

The submission includes FALCON input file and mesh for the an initial pressure-temperature simulation, and a second set for pressure-temperature-displacement simulation. All simulations are steady state. Data and input for the FORGE Phase 2 native state model were compiled from hi...
Podgorney, R. Idaho National Laboratory
Jun 06, 2019
2 Resources
0 Stars
Publicly accessible

Fallon FORGE: 3D Geologic Model

The 3D geologic model for the Fallon for site was constructed in EarthVision software using methods similar to (Moeck et al., 2009, 2010; Faulds et al., 2010b; Jolie et al., 2012, 2015; Hinz et al., 2013a; Siler and Faulds, 2013; Siler et al., 2016a, b) References are included in ...
Blankenship, D. and Siler, D. Sandia National Laboratories
Mar 01, 2018
1 Resources
0 Stars
Publicly accessible

Economic Impact of Permitting Timelines on Produced Geothermal Power

Despite having a large geothermal power potential in the United States, only a small fraction has been developed for power generation. Various barriers, including technical, financial, and regulatory permit delays, are attributed to lower contribution of geothermal energy in the n...
Neupane, G. and Adhikari, B. Idaho National Laboratory
Feb 15, 2022
3 Resources
0 Stars
Publicly accessible
<< Previous10111213141516171819Next >>