Search OEDI Data
Showing results 351 - 375 of 1177.
Show
results per page.
Order by:
Available Now:
Research Areas
Accessibility
Data Type
Organization
Source
Shear Induced Permeability Test: Brady and Desert Peak Core X-Ray CT Files
As part of the shear induced permeability test, the rock cores were also scanned with X-ray Computed Tomography (CT) before and after sustainability tests using a modified GE Lightspeed 16 medical CT scanner. The CT provides another perspective on the fracture and aperture, as wel...
Kneafsey, T. et al Lawrence Berkeley National Laboratory
Sep 26, 2016
4 Resources
0 Stars
Publicly accessible
4 Resources
0 Stars
Publicly accessible
Archuleta County CO Lineaments
This layer traces apparent topographic and air-photo lineaments in the area around Pagosa springs in Archuleta County, Colorado. It was made in order to identify possible fault and fracture systems that might be conduits for geothermal fluids.
Geothermal fluids commonly utilize fa...
E., R. Flint Geothermal, LLC
Jan 01, 2012
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Penn State Lab Testing Fluid-Rock Interaction in Geothermal Reservoirs
This project focused on assessment and discovery of fluid-rock interaction in geothermal reservoirs. We accomplished work in four main areas: 1) fracture formation and the relationship between fluid flow and shear failure, 2) assessment of fracture geometry and fluid permeability ...
Madara, B. et al Pennsylvania State University
Jan 01, 2018
5 Resources
0 Stars
Publicly accessible
5 Resources
0 Stars
Publicly accessible
Utah FORGE: Deep Wells Temperature Surveys as of September 2022
This Excel spreadsheet contains temperature survey results for Utah FORGE wells 58-32, 78-32, 56-32, 16A(78)-32 and 78B-32. It also contains charts and comparisons, along with a "Data Summary" which provides links to previous GDR submissions with temperature data for each well.
Jones, C. Energy and Geoscience Institute at the University of Utah
Sep 16, 2022
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Stimulation at Desert Peak Modeling with the Coupled THM Code FEHM
Numerical modeling of the 2011 shear stimulation at the Desert Peak Well 27-15 using a coupled thermal-hydrological-mechanical simulator. This submission contains the finite element heat and mass transfer (FEHM) executable code for a 64-bit PC Windows-7 machine, and the input and ...
Kelkar, S. et al Los Alamos National Laboratory
Apr 30, 2013
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Beaver Basin Wildcat Well Lu Lu State #1 Dip Meter and Neutron Density Logs
This dataset contains Schlumberger dip meter and neutron density logs for Lu Lu State #1 wild cat well which is located in the Beaver Basin, Beaver County, Utah. There is also a text file with well location coordinates.
Schlumberger, S. Energy and Geoscience Institute at the University of Utah
Oct 08, 2018
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Area Terrain Slope Data
This archive contains a terrain slope image, in units of degrees, of the Utah FORGE area near Roosevelt Hot springs. The data was derived from 0.5 m resolution LiDAR DEM data and is in a GeoTiff format. It was processed using ArcGIS.
Nash, G. Energy and Geoscience Institute at the University of Utah
Dec 10, 2018
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Seismograph Station Information and Data
This link leads to the University of Utah Seismograph Stations website Utah FORGE seismograph stations page. This page contains a location map and description of the Utah FORGE seismograph stations and other related information. Additionally, data can be downloaded for each statio...
Pankow, K. University of Utah Seismograph Stations
Jan 26, 2021
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Milford Site Location, Seismometer Locations, Basin Depth Models, and Potentiometric Contours
This submission includes the geographic extent shapefile of the Milford FORGE site located in Utah, along with a shapefile of seismometer positions throughout the area, and models of basin depth and potentiometric contours.
Moore, J. Energy and Geoscience Institute at the University of Utah
Mar 09, 2016
4 Resources
0 Stars
Publicly accessible
4 Resources
0 Stars
Publicly accessible
Fallon FORGE: Well 21-31 Wireline Logs
Included are the following wireline logs from the Fallon FORGE Well 21-31:
Ormat_Forge 21-31_8.5 inch section:
FMI data in PDF and DLIS formats;
MSCT data in PDF format;
Pressure and Temperature data in PDF, LAS, and DLIS formats;
Sonic Scanner data in PDF, DLIS, and LAS formats ...
Blankenship, D. Sandia National Laboratories
Mar 14, 2018
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Wells Wow2 and Wow3 Groundwater Monitoring Data
This dataset includes ground water level data for Utah FORGE Phase 2c ground water monitoring wells Wow2 and Wow3. The readme file explains the fields contained in the included Excel spreadsheet and contains the coordinates for the wells. The Excel spreadsheet contains raw data ta...
Kirby, S. Energy and Geoscience Institute at the University of Utah
Jun 20, 2019
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Utah FORGE: Phase 3 InSAR Study Results
Ground movement is evaluated through analysis of Interferometric Synthetic Aperture Radar (InSAR) interferograms. Results indicate there has been no detectable ground movement at millimeter scale. The zipped file in this submission contains a report, maps, and results from the InS...
Feigl, K. and Batzli, S. Department of Geoscience University of Wisconsin-Madison
Sep 24, 2020
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Phase 3 Microgravity Data
A 4D microgravity survey began in early 2019 in order to benchmark surface and subsurface elevations prior to Phase 3 drilling and stimulation campaigns. Microgravity stations are collocated with GPS deformation benchmarks and use the same location survey data. Surveys are underta...
Hardwick, C. Utah Geological Survey
Oct 07, 2020
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Material Properties for Brady Hot Springs Nevada USA from PoroTomo Project
The PoroTomo team has completed inverse modeling of the three data sets (seismology, geodesy, and hydrology) individually, as described previously. The estimated values of the material properties are registered on a three-dimensional grid with a spacing of 25 meters between nodes....
Feigl, K. and PoroTomo Team, . University of Wisconsin
Mar 06, 2019
10 Resources
0 Stars
Publicly accessible
10 Resources
0 Stars
Publicly accessible
Life Cycle Analysis Data and Results for Geothermal and Other Electricity Generation Technologies
Life cycle analysis (LCA) is an environmental assessment method that quantifies the environmental performance of a product system over its entire lifetime, from cradle to grave. Based on a set of relevant metrics, the method is aptly suited for comparing the environmental performa...
Sullivan, J. Argonne National Laboratory
Jun 04, 2013
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
PetroQuip Engineering Design and Specification Document for LBP and LP
This document provides the applications, specifications, testing, materials, and running methods for the engineering team at PertoQuip to design the Locking Bridge Plug (LBP) and the Landing Profile (LP). This is the first step in developing a new tool for. The report includes ap...
Coon, R. PetroQuip Energy Services
Feb 09, 2022
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Faults, Fractures, and Lineaments in the Mineral Mountains
This submission includes a shapefile of the Opal Mound Fault, and multiple datasets of lineaments mapped in the Mineral Mountains which overlook the Utah FORGE site, hyperlinked to rose diagrams in a polygon grid shapefile.
Moore, J. Energy and Geoscience Institute at the University of Utah
Mar 09, 2016
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Full Moment Tensor Inversion Software
The link points to a website at NCEDC to download the full moment tensors inversion software The moment tensor analysis conducted in the current project is based on the full moment tensor model described in Minson and Dreger (2008). The software including source, examples and tut...
Gritto, R. and Dreger, D. Array Information Technology
Oct 31, 2018
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Well 16A(78)-32 2022 Stimulation Microseismic Report
This is a Utah FORGE well 16A(78)-32 stimulation microseismic detection and event location report from Silixa LLC. The report covers the digital acoustic sensing (DAS) data acquisition and analysis used to study microseismic events during the April, 2022 stimulations at well 16A(7...
LLC, S. Energy and Geoscience Institute at the University of Utah
Sep 26, 2022
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Pressure-Temperature Simulation at Brady Hot Springs
These files contain the output of a model calculation to simulate the pressure and temperature of fluid at Brady Hot Springs, Nevada, USA. The calculation couples the hydrologic flow (Darcy's Law) with simple thermodynamics. The epoch of validity is 24 March 2015. Coordinates are ...
Feigl, K. Temple University
Jul 11, 2017
3 Resources
0 Stars
Publicly accessible
3 Resources
0 Stars
Publicly accessible
Utah FORGE: Observation Well Data
This archive contains temperature data for Roosevelt Hot Springs observation wells OH-1, OH-4, OH-5 and OH-7. There are also mud logs for OH-4. These are old datasets obtained from Rocky Mountain Power for use in the Utah FORGE project. Temperature data were collected in the 1970s...
Nash, G. Energy and Geoscience Institute at the University of Utah
Feb 22, 2018
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Geology Map and GIS Data
This archive contains a geology map of the general Roosevelt Hot Springs region, both in PDF and ArcGIS geodatabase formats, that was created as part of the Utah FORGE project.
Kirby, S. et al Energy and Geoscience Institute at the University of Utah
Mar 15, 2018
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Utah FORGE: Milford Deep Test Well 58-32 (MU-ESW1) Pressure and Temperature Logs
This archive consists of a pdf graphic log and a LAS text file representing the results of the pressure and temperature logs measured on Nov. 8th, 2018 from the Utah FORGE deep test well 58-32 (MU-ESW1). The logs were taken by DI Drill Survey Services.
Moore, J. Energy and Geoscience Institute at the University of Utah
Nov 08, 2018
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Fallon FORGE: GIS and Downhole Well Lithology Data
ArcGIS Map Package with MT Station Locations, 2D Seismic Lines, Well data, Known Regional Hydrothermal Systems, Regional Historic Earthquake Seismicity, Regional Temperature Gradient Data, Regional Heat Flow Data, Regional Radiogenic Heat Production, Local Geology, Land Status, Cu...
Blankenship, D. Sandia National Laboratories
Dec 23, 2015
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Utah FORGE: Heat Flow Contours and Well Data
This submission contains a shapefile of heat flow contour lines around the FORGE site located in Milford, Utah. The model was interpolated from data points in the Milford_wells shapefile. This heat flow model was interpolated from 66 data points using the kriging method in Geostat...
Moore, J. Energy and Geoscience Institute at the University of Utah
Mar 09, 2016
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible