Search OEDI Data
Showing results 276 - 300 of 466.
Show
results per page.
Order by:
Available Now:
Research Areas
Accessibility
Data Type
Organization
Source
Fallon FORGE: Vs30m Seismic Velocity
Time-averaged shear-wave velocity to 30 m depth about the Fallon, NV FORGE site.
Blankenship, D. and Kaven, J. Sandia National Laboratories
Mar 12, 2018
3 Resources
0 Stars
Publicly accessible
3 Resources
0 Stars
Publicly accessible
Temperature and Pressure Data Brady Monitoring Well SP-2
Static Pressure and Temperature Log for Brady monitor well SP-2. This data was taken from Well SP-2 which is part of the Brady Hot Springs Geothermal Site. The data contains pressure and temperature vs depth data for RIH (run in hole) Static conditions and POOH (pull out of hole) ...
Akerley, J. University of Wisconsin
Jan 01, 2015
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Utah FORGE: MT Stations and Raw Data
There are two zipped folders in this submission. One contains a shapefile with the position of MT stations around the Milford FORGE Site, while the other has the raw MT data.
Moore, J. Energy and Geoscience Institute at the University of Utah
Mar 09, 2016
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Fallon FORGE: 3D Geologic Model
An x,y,z scattered data file for the 3D geologic model of the Fallon FORGE site. Model created in Earthvision by Dynamic Graphic Inc. The model was constructed with a grid spacing of 100 m. Geologic surfaces were extrapolated from the input data using a minimum tension gridding al...
Blankenship, D. Sandia National Laboratories
Mar 01, 2016
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Leapfrog 3D Geologic Movie
This is a 3D geological movie of the Utah FORGE area created with Leapfrog Geothermal 3D modelling software. The movie shows the Utah FORGE site, wells, seismic and lithologic cross-sections, and rock unit tops. This illustrates the thick crystalline granitoid EGS reservoir.
Podgorney, R. Energy and Geoscience Institute at the University of Utah
May 18, 2018
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE 3-2418: Wellbore Fracture Imaging Using Inflow Detection Measurements Workshop Presentation
This is a presentation on the Wellbore Fracture Imaging Using Inflow Detection Measurements project by Stanford University, presented by Dr. Roland N. Horne. The project's objective was to make measurements in the Utah FORGE wells, both before and after fracturing experiments, to...
Horne, R. and Su, J. Stanford University
Sep 08, 2023
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Machine Learning-Assisted High-Temperature Reservoir Thermal Energy Storage Optimization: Numerical Modeling and Machine Learning Input and Output Files
This data set includes the numerical modeling input files and output files used to synthesize data, and the reduced-order machine learning models trained from the synthesized data for reservoir thermal energy storage site identification.
In this study, a machine-learning-assiste...
Jin, W. et al Idaho National Laboratory
Apr 15, 2022
4 Resources
0 Stars
Publicly accessible
4 Resources
0 Stars
Publicly accessible
McGee Mountain Geoprobe Survey, Humboldt County, Nevada
This shapefile contains location and attribute data for a Geoprobe temperature survey conducted by Geothermal Technical Partners, Inc. during 2010. The purpose of direct push technology (DPT) probe activity at the McGee Mtn. Project, Nevada was to 1) determine bottom hole temperat...
Zehner, R. Geothermal Technical Partners, Inc.
Jun 01, 2010
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
McGee Mountain Geoprobe Study, Humboldt County, Nevada
Geoprobes were developed by the environmental industry to collect water, gas and soil samples from contaminated sites at shallow depths (10-40 meters), with a minimum of environmental disturbance. A modified Geoprobe was used to collect bottom hole temperatures, and attempt to col...
Tullar, K. Geothermal Technical Partners, Inc.
Jun 19, 2010
3 Resources
0 Stars
Publicly accessible
3 Resources
0 Stars
Publicly accessible
GeoThermalCloud framework for fusion of big data and multi-physics models in Nevada and Southwest New Mexico
Our GeoThermalCloud framework is designed to process geothermal datasets using a novel toolbox for unsupervised and physics-informed machine learning called SmartTensors. More information about GeoThermalCloud can be found at the GeoThermalCloud GitHub Repository. More information...
Vesselinov, V. Los Alamos National Laboratory
Mar 29, 2021
4 Resources
0 Stars
Publicly accessible
4 Resources
0 Stars
Publicly accessible
Steptoe Valley NV Data Compilation: Understanding a Stratigraphic Hydrothermal Resource through Geophysical Imaging
Sandia National Laboratories partnered with a multi-disciplinary group of subject matter experts to evaluate a stratigraphic geothermal resource in Steptoe Valley, Nevada using both established and novel geophysical imaging techniques. Provided here are a compilation of newly acqu...
Schwering, P. et al Sandia National Laboratories
Nov 01, 2023
8 Resources
0 Stars
Publicly accessible
8 Resources
0 Stars
Publicly accessible
Utah FORGE 3-2535: Building a 3D Resistivity Model for Simulation and Survey Design of EM Measurements
The included report outlines the creation of three 3D resistivity models that will be used to determine the sensitivity of EM measurements for the hypothetical stimulated reservoir at FORGE as well as for EM survey design. FORGE project 3-2535 is planning on using a casing source ...
Alumbaugh, D. et al Lawrence Berkeley National Laboratory
Dec 01, 2022
5 Resources
0 Stars
Publicly accessible
5 Resources
0 Stars
Publicly accessible
Newberry EGS Seismic Velocity Model
We use ambient noise correlation (ANC) to create a detailed image of the subsurface seismic velocity at the Newberry EGS site down to 5 km. We collected continuous data for the 22 stations in the Newberry network, together with 12 additional stations from the nearby CC, UO and UW ...
Templeton, D. Lawrence Livermore National Laboratory
Oct 01, 2013
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
MT Data: Newberry 4D Monitoring EGS Project
This submission contains a link to the EDX Collaborative Workspace where the MT data collected in support of the DOE GTO 4D EGS monitoring project is stored.
Daily production reports- Oregon State University (OSU) had 6 stations running continuously.
--Dynamic survey map, KML f...
Rose, K. National Energy Technology Laboratory
Apr 12, 2016
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Phase 3 Magnetotelluric (MT) Data
New high-quality tensor MT data at 122 sites, including the vertical magnetic field and utilizing ultra-remote referencing, have been acquired over the Utah FORGE project area. The results will be used to delineate the densities of faults and fractures in crystalline basement rock...
Wannamaker, P. and Maris, V. Energy and Geoscience Institute at the University of Utah
Oct 01, 2020
5 Resources
0 Stars
Publicly accessible
5 Resources
0 Stars
Publicly accessible
A Conceptual Geologic Model for the Newberry Volcano EGS Site in Central Oregon: Constraining Heat Capacity and Permeability through Interpretation of Multicomponent Geosystems Data
Newberry Volcano, a voluminous (500 km3) basaltic/andesitic/rhyolitic shield volcano located near the intersection of the Cascade volcanic arc, the Oregon High Lava Plains and Brothers Fault Zone, and the northern Basin and Range Province, has been the site of geothermal explorati...
Mark-Moser, M. et al National Energy Technology Laboratory
Feb 22, 2016
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Desert Peak Geodatabase for Geothermal Exploration Artificial Intelligence
These files contain the geodatabases related to the Desert Peak Geothermal Field. It includes all input and output files used in the project. The files include data categories of raw data, pre-processed data, and analysis (post-processed data). In each of these categories there ar...
Moraga, J. et al Colorado School of Mines
Apr 27, 2021
3 Resources
0 Stars
Publicly accessible
3 Resources
0 Stars
Publicly accessible
Utah FORGE: Phase 3 Ground Water Level Monitoring Data
Groundwater data around the Utah FORGE site has been collected to determine the piezometric levels and compositional variability. Field measurements in 2020 are designed to obtain and survey new groundwater wells that have been drilled on the distal periphery of the Utah FORGE pro...
Kirby, S. Utah Geological Survey
Sep 30, 2020
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Raw Microgravity Composite Data Updated 10/2021
This is a microgravity dataset from the Utah FORGE site near Milford, Utah. This composite dataset was updated in October, 2021 and contains data from December 17th, 2018 through September 24th, 2021. The data includes the GPS location of the measurement, date of the measurement, ...
Hardwick, C. Utah Geological Survey
Oct 01, 2021
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Exploring for Geothermal Resources in a Dormant Volcanic System: The Haleakala Southwest Rift Zone, Maui, Hawai'i
Suites of new geophysical and geochemical surveys provide evidence for geothermal resource at the Haleakala Southwest Rift Zone (HSWRZ) on Maui Island, Hawai'i. This poster outlines the Site's background, the geophysical surveys conducted on the Site (LiDAR, gravity and magnetics)...
Martini, B. et al Ormat Nevada Inc
Dec 01, 2011
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
EGS-Collab Experiment 1: Time-lapse ERT Data and E4D Inversion Files for 10-24-2018 through 11-07-2018 Flow Test
This data submission includes the raw time-lapse ERT (electrical resistivity tomography) monitoring data, flow system data, operator logs, E4D (https://e4d.pnnl.gov) inversion files, and metadata necessary to reproduce the 4D ERT inversion for the Oct. 24 through Nov. 7 2018 post-...
Johnson, T. Pacific Northwest National Laboratory
Jul 30, 2021
5 Resources
0 Stars
Publicly accessible
5 Resources
0 Stars
Publicly accessible
Utah FORGE: Well 16B(78)-32 Extended Dual Well Circulation Testing Fiber Optic Monitoring Report August 2024
This report documents the post-hydraulic fracturing extended circulation test between Utah FORGE wells 16A and 16B conducted in August 2024. In well 16B, fiber optic measurements of Rayleigh frequency shift distributed strain sensing (RFS-DSS) and distributed temperature sensing ...
Jurick, D. et al Neubrex Energy Services (US), LLC
Aug 30, 2024
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: 2022 Well Stimulation Seismicity Data Including SeGY Data
This is a link to the Utah FORGE seismic data distribution site hosted by the University of Utah Seismograph Stations. The data was collected from downhole geophone strings in wells 56-32, 58-32 and 78B-32 during the 2022 stimulation of well 16A(78)-32. This dataset, which was upd...
Pankow, K. University of Utah Seismograph Stations
Apr 14, 2023
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
DEEPEN Data Catalog for Magmatic Geothermal Systems in the United States
This data catalog contains information related to the Training Site Analysis for the Geothermica project "DE-risking Exploration of geothermal Plays in magmatic ENvironments (DEEPEN)." The DEEPEN project aims to reduce exploration risk for geothermal fluids in magmatic systems by ...
Kolker, A. et al National Renewable Energy Laboratory
Sep 30, 2021
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Subsurface Characterization and Machine Learning Predictions at Brady Hot Springs Results
Geothermal power plants typically show decreasing heat and power production rates over time. Mitigation strategies include optimizing the management of existing wells increasing or decreasing the fluid flow rates across the wells and drilling new wells at appropriate locations. Th...
Beckers, K. et al National Renewable Energy Laboratory
Oct 20, 2021
6 Resources
0 Stars
Publicly accessible
6 Resources
0 Stars
Publicly accessible