Search OEDI Data

ALFA Biological Monitoring Density Values South Energy Test Site, Newport, Oregon

Density values from active acoustic measurements at South Energy Test Site. This data correspond to a bottom mounted upward-looking WBAT, deployed from April 19th to September 30th. Samples (175 pings) were collected hourly at 1Hz.

Horne, J. Northwest National Marine Renewable Energy Center

Apr 11, 2017
2 Resources
0 Stars
Publicly accessible

Sentinel-1 Input Data for PSInSAR Analysis

Files used to perform the Persistent Scatterer InSAR analysis with SARPROZ. The data is sourced from ESAs Sentinel-1 project and covers Brady Hot Springs and Desert Peak geothermal areas. The original titles are included for the Sentinel-1 data. The naming guide is included as a l...

Moraga, J. Colorado School of Mines

Apr 29, 2021
73 Resources
0 Stars
Publicly accessible

Measured Performance of a Varied Airflow Small-Diameter Duct System

In this study, researchers with the U.S. Department of Energy's Building America team IBACOS built on research previously done in two new-construction unoccupied test houses-one in Pittsburgh, Pennsylvania (Poerschke and Stecher 2014) and one in Fresno, California (Stecher and Poe...

Poerschke, A. Ibacos Innovation

Apr 27, 2016
5 Resources
0 Stars
Publicly accessible

Confined Brazilian Tests for Rock Failure Envelope and Behavior

Includes test data from Confined Brazilian Tests. The tests were aim at investigating the rock failure envelope of four different lithologies including Indiana limestone, Scioto sandstone, Grey Berea sandstone, and Tennessee sandstone. Tables include the strength data obtained usi...

Ghassemi, A. and Li, Y. University of Oklahoma

Aug 31, 2021
2 Resources
0 Stars
Publicly accessible

Bifacial PV Test-Bed Irradiance Measurements

Data for 2 front-facing and 4 rear-facing IMT irradiance sensors placed on a scaled-down setup that replicate a PV array in a highly-reflective rooftop. The test-bed consist of 3 rows of 20x2ft aluminum sheets (the “panels”), supported by a Unistrut structure, with 6 irra...

Ayala Pelaez. . et al National Renewable Energy Laboratory

Dec 10, 2019
1 Resources
0 Stars
Publicly accessible

Advanced TidGen Power System Material Characterization Program

The TidGen Power System generates emission-free electricity from tidal currents and connects directly into existing grids using smart grid technology. The power system consists of three major subsystems: shore-side power electronics, mooring system, and turbine generator unit (TGU...

Marnagh, C. and McEntee, J. Ocean Renewable Power Company

Jun 14, 2018
2 Resources
0 Stars
Publicly accessible

UAE6 Wind Tunnel Tests Data UAE6 Sequence O Raw Data

**Overview** Sequence O: Sin AOA, Parked (P) This sequence was designed to quantify the blade 3-D unsteady aerodynamic response in the absence of rotational influences by varying blade pitch angle. This test sequence used an upwind, rigid turbine with a 0° cone angle. The wind ...

Fingersh, L. Wind Energy Technologies Office (WETO)

Nov 28, 2018
1 Resources
0 Stars
Publicly accessible

Utah FORGE: Temperature-Dependent Fracture Seismicity from Fluid Injection Experiments

This dataset contains experimental data from fluid injection experiments conducted to investigate the influence of temperature on fracture seismicity. The experiments were performed on granite samples from Utah FORGE. The samples were prepared with a 30-degree inclined fracture an...

Wang, J. et al Pennsylvania State University

Feb 29, 2024
4 Resources
0 Stars
Publicly accessible

Reference Model 3 Scaled Geometry (RM3: Wave Point Absorber)

Contains the Reference Model 3 (RM3) scaled scale geometry files of the Wave Point Absorber, developed by the Reference Model Project (RMP). These scaled geometry files are saved as SolidWorks assembly, IGS, and STEP files, and require a CAD program to view. The scaled RM3 device ...

Neary, V. et al Sandia National Laboratories

Sep 30, 2014
7 Resources
0 Stars
Publicly accessible

Utah FORGE: Well 14-2 Logs and Data from Roosevelt Hot Spring Area

This is a compilation of logs and data from Well 14-2 in the Roosevelt Hot Springs area in Utah. This well is also in the Utah FORGE study area. Data includes: flowmeter survey (1989), geochemistry (1977-1978, 1977-1983), injection test data (1979, 1982), and spinner surveys (19...

Moore, J. Energy and Geoscience Institute at the University of Utah

Mar 03, 2016
1 Resources
0 Stars
Publicly accessible

DEMO-FTES Test 1: Water Flow, Pressure, Temperature, and Electrical Conductivity Data

This dataset contains 1-second and hourly resolution water flow rate, pressure, temperature, and electrical conductivity data collected during Test 1 of the DEMO Fracture Thermal Energy Storage (FTES) project at the Sanford Underground Research Facility (SURF) between December 10,...

Burghardt, J. et al Pacific Northwest National Laboratory

Apr 16, 2025
4 Resources
0 Stars
Publicly accessible

Shallow (2-meter) Temperature Surveys in Colorado

Shallow temperature surveys are useful in early-stage geothermal exploration to delineate surface outflow zones, with the intent to identify the source of upwelling, usually a fault. Detailed descriptions of the 2-meter survey method and equipment design can be found in Coolbaugh ...

E., R. Flint Geothermal, LLC

Feb 01, 2012
1 Resources
0 Stars
Publicly accessible

Structural and Tectonic Controls of Geothermal Activity in the Basin and Range Province

We are conducting an inventory of structural settings of geothermal systems (>400 total) in the extensional to transtensional Great Basin region of the western USA. A system of NW-striking dextral faults known as the Walker Lane accommodates ~20% of the North American-Pacific plat...

Faulds, J. et al University of Nevada

Nov 30, 2012
1 Resources
0 Stars
Publicly accessible

Seismic Analysis of Spatio-Temporal Fracture Generation During EGS Resource Development Full Moment Tensors and Stress Inversion Catalogs

This submission contains 167 full moment tensor (MT) solutions for the seismicity observed two years prior and three years post start of injection activities. Also included are the azimuth and plunge angles for the three main stress directions sigma1, sigma 2 and sigma 3 at the P...

Gritto, R. et al Array Information Technology

Sep 26, 2018
2 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: Circulation Testing

These data and test descriptions comprise a chilled circulation test conducted at the 164' fracture in the EGS Collab Experiment 1 testbed on the 4850 ft level of the Sanford Underground Research Facility. Descriptions of the meta data, design drawings for the flow testing system,...

Knox, H. et al Lawrence Berkeley National Laboratory

Apr 01, 2019
11 Resources
0 Stars
Publicly accessible

Organic Photovoltaic (OPV) Database

A database of quantum mechanical calculations on organic photovoltaic candidate molecules. Related Publications: Peter C. St. John, Caleb Phillips, Travis W. Kemper, A. Nolan Wilson, Michael F. Crowley, Mark R. Nimlos, Ross E. Larsen. (2018) Message-passing neural networ...

St. JohnNational Renewable Energy Laboratory

Apr 10, 2024
8 Resources
0 Stars
Publicly accessible

Utah FORGE: Fluid Injection Induced Shearing Experiments on Fractured Granitoid at Elevated Temperatures

This repository contains experimental data from a series of fluid injection-induced shearing tests conducted on Utah FORGE granitoid. The experiments were performed using an aluminum triaxial pressure vessel (TEMCO) apparatus at Pennsylvania State University. The primary aim was t...

Elsworth, D. et al Pennsylvania State University

Aug 12, 2024
16 Resources
0 Stars
Publicly accessible

Gearbox Reliability Collaborative Phase 3 Gearbox 3 Test

The GRC uses a combined gearbox testing, modeling, and analysis approach disseminating data and results to the industry and facilitating improvement of gearbox reliability. This test data describes the tests of GRC gearbox 3 in the National Wind Technology Center dynamometer and d...

Keller and WallenNational Renewable Energy Laboratory

Dec 21, 2016
18 Resources
0 Stars
Publicly accessible

Shaker Table Experiments with Rare Earth Elements Sorption from Geothermal Brine

This dataset described shaker table experiments ran with sieved 50 +100 mesh media #1 in brine #1 that have 2ppm each of the 7 REE metals at different starting pH's of 3.5, 4.5, and 5.5. The experimental conditions are 2g media to 150mL of REE solution, at 70C.

Garland, G. Tusaar Corp.

Jul 21, 2015
4 Resources
0 Stars
Publicly accessible

Northwest National Marine Renewable Energy Center, OR Project Plans

Plans for Northwest National Marine Renewable Energy Center (NNMREC) Project. Mobile Ocean Test Berth (MOTB) plans PMEC-SETS Plans

Hellin, D. Northwest National Marine Renewable Energy Center

Jun 29, 2016
20 Resources
0 Stars
Publicly accessible

TEAMER: Tidal Turbine Test, Downeast Turbines, July 12, 2021

Downeast Turbines tested a tidal turbine prototype with novel rotor/channel system and lateral effluent discharge apparatus (LEDA), during five days of testing in the flume at Alden Lab. Three days of testing (July 12-14, 2021) focused on turbine power metrics of torque and rpm, w...

McBride, G. Downeast Turbines

Mar 26, 2022
6 Resources
0 Stars
Publicly accessible

ALFA Oscillating Water Column Device Testing

Data from Phase 1 testing of a single ALFA Oscillating Water Column (OWC) device at the O.H. Hinsdale Wave Research Laboratory (HWRL) at Oregon State University in Fall of 2016. Contains two zip files of raw data, one of project data, and a diagram of the device with dimensions. ...

Bosma, B. Northwest National Marine Renewable Energy Center

Nov 07, 2016
4 Resources
0 Stars
Publicly accessible

MOIS Installation on NWEI Azura Half Scale WEC WETS Testing Documentation

This submission includes documentation on the Modular Ocean Instrumentation System (MOIS) installation on the Azura 1/2 scale wave energy converter at the Marine Station Kaneohe Bay (MCBH). Data from the deployment will be uploaded over the course of the test. The instrumentatio...

Nelson, E. National Renewable Energy Laboratory

May 30, 2015
7 Resources
0 Stars
Publicly accessible

Devices Suitable for Sectional Isolation Along Both Cased and Open-hole Wellbores Large-scale Test Setup

The main goal of this project is to develop an annular isolation system capable to withstand geothermal downhole conditions and mitigate the problems experienced by conventional packers in FORGE wells. This large-scale set-up report is about the system that has been constructed to...

Teodoriu, C. et al Welltec

Jan 31, 2023
2 Resources
0 Stars
Publicly accessible

Utah FORGE: Groundwater Data

This submission includes two modeled drawdown scenarios with new supply well locations, a total dissolved solids (TDS) concentration grid (raster dataset representing the spatial distribution of TDS), and an excel spreadsheet containing well data.