Search OEDI Data
Showing results 26 - 50 of 71.
Show
results per page.
Order by:
Available Now:
Research Areas
Accessibility
Data Type
Organization
Source
Centralizer for Use in Well Completions
Well completions are an integral part of providing safe, reliable and continuous access to underground resources such as oil, gas and geothermal resources. Completions are typically considered to be the final step of drilling engineering which includes processes such as setting c...
Su, J. Sandia National Laboratories
Apr 17, 2014
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Operational Performance Requirements For Motor Power Sections Used in Geothermal Drilling Based Upon Minimum Specific Energy
Operational performance requirements are needed to support development of specifications for downhole motor power sections to be used for drilling hard rock during geothermal wellbore construction. Theoretical torque specifications are derived based upon a widely-accepted rock-re...
Raymond, D. Sandia National Laboratories
Sep 10, 2014
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Brady's Geothermal Field Metadata for DTS and DAS Surveys
Metadata for DTS and DAS datasets for both borehole 56-1 and trenched cables.
Coleman, T. University of Wisconsin
Mar 26, 2016
5 Resources
0 Stars
Publicly accessible
5 Resources
0 Stars
Publicly accessible
Testing LCM on a Large Scale for Geothermal Drilling Applications Using a Novel Experimental Setup
Rheology data obtained from flow loop tests, performed using different lost circulation materials (LCM) to study their effect on fluid rheology and wellbore hydraulics. The sealing performance of different LCM was tested using different fracture sizes. Five academic papers / repor...
Mohamed, A. et al University of Oklahoma
Apr 22, 2022
10 Resources
0 Stars
Publicly accessible
10 Resources
0 Stars
Publicly accessible
SGW paper Rheological Properties of Drilling Fluids Containing Special Additives for Geothermal Drilling Applications
The paper was presented at the 46th Workshop on Geothermal Reservoir Engineering, Stanford University, Stanford, California, February 15-17, 2021. In this study, the effectiveness of different additives was evaluated in maintaining drilling fluid rheology at HPHT(high pressure and...
Mohamed, A. et al University of Oklahoma
Jan 04, 2023
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Directional Cooling-Induced Fracturing Westerly Granite Test Results
Directional Cooling-Induced Fracturing (DCIF) experiments were conducted on a short, cylindrical sample of Westerly granite (diameter = 4 inches, height ~ 2 inches). Liquid nitrogen was poured in a copper cup attached to the top of the sample, and the resulting acoustic emissions ...
Nakagawa, S. Lawrence Berkeley National Laboratory
Dec 18, 2020
5 Resources
0 Stars
Publicly accessible
5 Resources
0 Stars
Publicly accessible
University of Illinois Campus Deep Direct-Use Feasibility Study Design of Injection Well #1 (CCS1)
Includes specification sheet, wellbore geometry, and drilling fluids at section target depth associated with the design of Injection Well #1 (CCS1) for the Illinois Basin Decatur Project (IBDP).
Greenberg, S. University of Illinois
Mar 30, 2018
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
West Flank Coso FORGE: Natural Fracture Data
Natural fracture data from wells 33-7, 33A-7,52A-7, 52B-7 and 83-11 at West Flank. Fracture orientations were determined from image logs of these wells (see accompanying submissions). Data files contain depth, apparent (in wellbore reference frame) and true (in geographic referenc...
Blankenship, D. Sandia National Laboratories
May 16, 2016
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
WISE-CASING: Time Domain Reflectometry Data from Lab Experiment on Coaxial Cable
The coaxial-cable experiment conducted in the lab was with 80 m coaxial cable( RG-85). This experiment compares the TDR response between damaged and undamaged cable. For the damaged cable, the damaged section is in the middle (40 m). The amplitude of the data is mV with time (us).
Wu, Y. and Wang, J. Lawrence Berkeley National Laboratory
Mar 15, 2018
9 Resources
0 Stars
Publicly accessible
9 Resources
0 Stars
Publicly accessible
WISE-CASING: Time Domain Reflectometry Data from Lab Experiment on Steel Pipe
The steel pipe experiment conducted in the lab was using 6 meter low-carbon steel pipe. We tested it with both dry and in-water condition. In the dry experimental setup, a coaxial cable acting as a return path in the air.
Wang, J. and Wu, Y. Lawrence Berkeley National Laboratory
Jul 23, 2019
9 Resources
0 Stars
Publicly accessible
9 Resources
0 Stars
Publicly accessible
Utah FORGE Borehole Sensors and Well Trajectories (April 2022)
This link leads to a webpage with spreadsheets containing seismic borehole sensor locations and well trajectories for wells 56-32, 58-32, 78-32, 78B-32. Each of the files at the provided link include meta data on relevant information.
Pankow, K. University of Utah Seismograph Stations
Dec 23, 2022
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
West Flank Coso FORGE: Well 74-2TCH Temperature, Pressure, Well History, Well Bore Schematic
Temperature logs, pressure logs, directional survey, well history, well bore schematic, and other reports for well 74-2TCH at West Flank FORGE
Blankenship, D. Sandia National Laboratories
May 13, 2016
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Life Cycle Analysis Data and Results for Geothermal and Other Electricity Generation Technologies
Life cycle analysis (LCA) is an environmental assessment method that quantifies the environmental performance of a product system over its entire lifetime, from cradle to grave. Based on a set of relevant metrics, the method is aptly suited for comparing the environmental performa...
Sullivan, J. Argonne National Laboratory
Jun 04, 2013
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
WISE-CASING: Surface Seismic Survey at Cymric Field, California Central Valley
This test was conducted at the Chevron Cymric oilfield in the California central valley near Bakersfield. A reflected seismic signal was observed in all three components (x, y, z) of the 3-component Episensor geophone, as well as all phones on the single component array. The arriv...
Wu, Y. et al Lawrence Berkeley National Laboratory
Apr 02, 2018
6 Resources
0 Stars
Publicly accessible
6 Resources
0 Stars
Publicly accessible
Devices Suitable for Sectional Isolation Along Both Cased and Open-hole Wellbores Pipe Preparation Report
The main goal of this project is to develop an annular isolation system capable to withstand geothermal downhole conditions and mitigate the problems experienced by conventional packers in FORGE wells. This pipe preparation report is based on the test pipe that was procured and pr...
Teodoriu, C. et al Welltec
Mar 31, 2023
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Devices Suitable for Sectional Isolation Along Both Cased and Open-hole Wellbores Large-scale Test Setup
The main goal of this project is to develop an annular isolation system capable to withstand geothermal downhole conditions and mitigate the problems experienced by conventional packers in FORGE wells. This large-scale set-up report is about the system that has been constructed to...
Teodoriu, C. et al Welltec
Jan 31, 2023
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
SMP and Fracture Modeling
The problem of loss circulation in geothermal wells is inherently challenging due to high temperatures, brittle rocks, and presence of abundant fractures. Because of the inherent challenges in geothermal environments, there are limitations in selecting proper lost circulation mate...
Salehi, S. et al University of Oklahoma
Oct 01, 2021
4 Resources
0 Stars
Publicly accessible
4 Resources
0 Stars
Publicly accessible
WISE-CASING: DC Simulation at Containment and Monitoring Institute (CaMI), Calgary, Canada
For the model calculation we applied EM3D using completion diagram of CaMI site and a background resistivity consistent with the borehole logs. It was also important to use the accurate position of the return electrode. We note that for the data fit the code also incorporated we...
Wang, J. and Wilt, M. Lawrence Berkeley National Laboratory
Apr 30, 2019
7 Resources
0 Stars
Publicly accessible
7 Resources
0 Stars
Publicly accessible
WISE-CASING: Time Domain Reflectometry Data from Cymric Field, CA
The objective of this field test is to validate several technologies for non-invasive well integrity assessment using existing wells with a known completion. The tests were made at the Cymric oil field, which is a steam flood operation. The wells therefore undergo similar downhole...
Wang, J. Lawrence Berkeley National Laboratory
Feb 21, 2019
5 Resources
0 Stars
Publicly accessible
5 Resources
0 Stars
Publicly accessible
Devices Suitable for Sectional Isolation Along Both Cased and Open-hole Wellbores Materials Testing Report
The main goal of this project is to develop an annular isolation system capable to withstand geothermal downhole conditions and mitigate the problems experienced by conventional packers in FORGE wells. This materials testing report is based on thermoplastic and elastomeric materia...
Teodoriu, C. et al Welltec
Nov 08, 2022
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Testing for Controlled Rapid Pressurization
Borehole W1 is a NQ core hole drilled at our test site in Socorro. The rock is rhyolite. Borehole W1 which was used to test gas-gas explosive mixtures is 55 feet deep with casing (pinkish in the drawing) set to 35 feet. The model is a representation of the borehole and the hol...
Knudsen, S. Sandia National Laboratories
Sep 03, 2014
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Extraction/Injection Well Design for Deep Direct Use at University of Illinois at Urban-Champaign
The large scale Deep Direct Use (DDU) geothermal project in the low temperature environment of the Illinois Basin requires drilling and completing two wells. One well would be the extraction (producing) well and would be built to deliver a flow rate of approximately 6000 barrels ...
Kirksey, J. and Lu, Y. University of Illinois
Mar 31, 2019
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
EGS Collab Experiment 1: Accelerometer orientations
Document describing the methodology used to determine the accelerometers' three-component orientations at the first EGS Collab testbed using Continuous Active-Source Seismic Monitoring (CASSM) data and hodogram analysis.
Original submission: gdr.openei.org/submissions/1166
Hopp, C. et al Lawrence Berkeley National Laboratory
Aug 19, 2020
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Energy Return On Investment of Engineered Geothermal Systems Data
The project provides an updated Energy Return on Investment (EROI) for Enhanced Geothermal Systems (EGS). Results incorporate Argonne National Laboratory's Life Cycle Assessment and base case assumptions consistent with other projects in the Analysis subprogram.
EROI is a ratio o...
Mansure, C. Arthur Mansure
Jan 01, 2012
7 Resources
0 Stars
Publicly accessible
7 Resources
0 Stars
Publicly accessible
WISE-CASING: Frequency Domain EM Data from Cymric Oil Field, CA
Cymric oil field frequency domain electromagnetic (FEM) data with two parts of data labeled Part 1 and Part 2. Part 1 utilizes an electrical source line parallel to the receiver line, while Part 2 utilizes an electrical source line at a 75 deg angle to the receiver line. Data are ...
Wang, J. et al Lawrence Berkeley National Laboratory
Apr 30, 2019
11 Resources
0 Stars
Publicly accessible
11 Resources
0 Stars
Publicly accessible