Search OEDI Data

Showing results 26 - 47 of 47.
Show results per page.
Order by:
Available Now:
Research Areas
Accessibility
Data Type
Organization
Source
"wake steering"×

NWTC WindCube Nacelle Lidar pre-campaign / Raw Data

**Overview** Test data from the National Wind Technology Center (NWTC) for the WindCube Nacelle Lidar. Includes both real-time and 10-min average data.
Scholbrock, A. and Zalkind, D. Wind Energy Technologies Office (WETO)
Feb 01, 2022
1 Resources
0 Stars
Publicly accessible

PNNL Parsivel2 Laser Disdrometer #2 pre-campaign / Raw Data

**Overview** The Parsivel2 Laser Disdrometers provide accurate measurements of precipitation, hail and snow. They also provide droplet size distributions.
Krishnamurthy, R. Wind Energy Technologies Office (WETO)
Dec 26, 2021
1 Resources
0 Stars
Publicly accessible

PNNL MET #1 pre-campaign / Raw Data

**Overview** This dataset tests the data transfer and processing for a surface flux station, which includes low-speed weather information and high-speed sonic anemometer data.
Goldberger, L. Wind Energy Technologies Office (WETO)
Sep 22, 2015
1 Resources
0 Stars
Publicly accessible

NWTC Ceilometer (1) Pre-campaign / Raw Data

**Overview** This instrument will be testing the data transfer process pre-before deploying the campaign. The netCDF L1 data file contains level 1 (L1) data from the ceilometer. **Data Quality** Raw data from ceilometer
Hamilton, N. and Zalkind, D. Wind Energy Technologies Office (WETO)
Sep 20, 2018
1 Resources
0 Stars
Publicly accessible

PNNL LIDAR Halo Streamline XR+ (1) pre-campaign / Raw Data

**Overview** This is a pre-campaign instrument deployment. With it, we aim to upload data and test/verify the ingest pipeline. **Data Quality** Adding signal-to-noise ratio can exclude data based on this value.
Newsom, R. Wind Energy Technologies Office (WETO)
Feb 23, 2021
1 Resources
0 Stars
Publicly accessible

LLNL LIDAR Halo Streamline XR+ pre-campaign / Proc Data

**Overview** This is a pre-campaign instrument deployment. With it, we aim to upload data and test/verify the ingest pipeline. **Data Quality** Adding signal-to-noise ratio can exclude data based on this value.
Newsom, R. Wind Energy Technologies Office (WETO)
Jan 02, 2022
1 Resources
0 Stars
Publicly accessible

NWTC Ceilometer (1) Pre-campaign / Reviewed Data

**Overview** This instrument will be testing the data transfer process before deploying the campaign. The netCDF L2 data file from the ceilometer contains level 2 (L2) data that has gone through the precalculation service and averaging. The profile is set to 4500 m (14 764 ft). ...
Hamilton, N. and Zalkind, D. Wind Energy Technologies Office (WETO)
Sep 20, 2018
1 Resources
0 Stars
Publicly accessible

RANS Simulation VBM of Array of Three Coaxial Lab Scaled DOE RM1 MHK Turbine with 5D Spacing

Attached are the .cas and .dat files along with the required User Defined Functions (UDFs) and look-up table of lift and drag coefficients for the Reynolds Averaged Navier-Stokes (RANS) simulation of three coaxially located lab-scaled DOE RM1 turbine implemented in ANSYS FLUENT CF...
Javaherchi, T. University of Washington
Jun 08, 2016
9 Resources
0 Stars
Publicly accessible

NWTC Ceilometer (1) Pre-campaign / Derived Data

**Overview** This instrument will be testing the data transfer process before deploying the campaign. The netCDF L3 data file has level 3 (L3) data that have gone through the calculation service and contains all the data from the algorithms, including mixing layer height values ...
Hamilton, N. and Zalkind, D. Wind Energy Technologies Office (WETO)
Sep 20, 2018
1 Resources
0 Stars
Publicly accessible

RANS Simulation ADM of the NREL Phase VI wind turbine modeled as MHK Turbine

Attached are the .cas and .dat files for the Reynolds Averaged Navier-Stokes (RANS) simulation of a single lab-scaled DOE RM1 turbine implemented in ANSYS FLUENT CFD-package. In this case study the flow field around and in the wake of the NREL Phase VI wind turbine, modeled is MH...
Javaherchi, T. University of Washington
Jun 08, 2016
3 Resources
0 Stars
Publicly accessible

Physical and Numerical Modeling Open Source Files and Datasets for 1:6 Scale Reference Model 2 (RM2) Cross-Flow Turbine

This submission includes Github links to open source files and data sets, including the numerical model, CACTUS, input files, source code and output files, CAD files of the 1:6 scale model DOE's RM2 cross-flow turbine, power performance data and wake flow measurements from the 1:6...
Neary, V. Sandia National Laboratories
Jun 30, 2015
3 Resources
0 Stars
Publicly accessible

RANS Simulation RRF of Single Full Scale DOE RM1 MHK Turbine

Attached are the .cas and .dat files for the Reynolds Averaged Navier-Stokes (RANS) simulation of a single full scale DOE RM1 turbine implemented in ANSYS FLUENT CFD-package. In this case study taking advantage of the symmetry of the DOE RM1 geometry, only half of the geometry i...
Javaherchi, T. et al University of Washington
Apr 10, 2013
2 Resources
0 Stars
Publicly accessible

TEAMER: Electrically Engaged Undulation (EEL) System

The Electrically Engaged UnduLation (EEL) system is a buoyancy-driven submersible device for powering oceanographic instruments. Physically, EEL is a slender body whose flexible spine is made up of energy units interconnected by uniaxial hinges. Each unit consists of a pair of pie...
Lu, K. Pyro-E
Dec 01, 2021
2 Resources
0 Stars
Publicly accessible

UAE6 Wind Tunnel Tests Data UAE6 Sequence P Raw Data

**Overview** Sequence P: Wake Flow Visualization, Upwind (P) This test sequence used an upwind, rigid turbine with a 0° cone angle. The wind speed ranged from 5 m/s to 15 m/s. Yaw angles of 0° to –60° were achieved. The blade tip pitch was 3°. The rotor rotated at 72 RPM. ...
Fingersh, L. Wind Energy Technologies Office (WETO)
Nov 28, 2018
1 Resources
0 Stars
Publicly accessible

Lift Equivalence and Cancellation for Airfoil Surge-Pitch-Plunge Oscillations

A NACA 0018 airfoil in freestream velocity is oscillated in longitudinal, transverse, and angle-of-attack directions with respect to the freestream velocity, known as surge, plunge, and pitch. The lift-based equivalence method introduces phase shifts between these three motions to...
Elfering, K. and Granlund, K. North Carolina State University
Jan 01, 2020
1 Resources
0 Stars
Publicly accessible

RANS Simulation RRF of Single Lab-Scaled DOE RM1 MHK Turbine

Attached are the .cas and .dat files for the Reynolds Averaged Navier-Stokes (RANS) simulation of a single lab-scaled DOE RM1 turbine implemented in ANSYS FLUENT CFD-package. The lab-scaled DOE RM1 is a re-design geometry, based of the full scale DOE RM1 design, producing same p...
Javaherchi, T. et al University of Washington
Apr 15, 2014
3 Resources
0 Stars
Publicly accessible

In-Situ Blade Strain Measurements of a Crossflow Turbine Operating in a Tidal Flow

This data was collected between October 25 and December 12 of 2022 at the University of New Hampshire (UNH) and Atlantic Marine Energy Center (AMEC) turbine deployment platform (TDP). The goal was to collect blade strain data from a crossflow turbine operating in a tidal flow. A t...
Bharath, A. et al National Renewable Energy Laboratory
Dec 16, 2022
17 Resources
0 Stars
Publicly accessible

TEAMER: Tidal Turbine Test, Downeast Turbines, July 12, 2021

Downeast Turbines tested a tidal turbine prototype with novel rotor/channel system and lateral effluent discharge apparatus (LEDA), during five days of testing in the flume at Alden Lab. Three days of testing (July 12-14, 2021) focused on turbine power metrics of torque and rpm, w...
McBride, G. Downeast Turbines
Mar 26, 2022
6 Resources
0 Stars
Publicly accessible

Global CFDDA-based Onshore and Offshore Wind Potential Supply Curves by Country, Class, and Depth

This dataset contains global onshore and offshore wind supply curves based on a resource assessment performed at the National Renewable Energy Laboratory (NREL) based on the National Center for Atmospheric Research's (NCAR) Climate Four Dimensional Data Assimilation (CFDDA) mesosc...
Sullivan, P. et al National Renewable Energy Laboratory
Nov 25, 2014
2 Resources
1 Stars
Publicly accessible

Reference Model 1 Scaled Geometry (RM1: Tidal Current Turbine)

Contains the Reference Model 1 (RM1) scaled scale geometry files of the Tidal Current Turbine, developed by the Reference Model Project (RMP). These scaled geometry files are saved as SolidWorks assembly, IGS, and STEP files, and require a CAD program to view. The scaled RM1 devic...
Neary, V. and Hill, C. Sandia National Laboratories
Sep 30, 2014
8 Resources
0 Stars
Publicly accessible

TEAMER: Cross-flow Turbine Hydrodynamics

The objective of this work is to validate RANS and LES computations of cross-flow turbine hydrodynamics using laboratory scale measurements. Validation involves the comparison of time-and phase averaged performance metrics and flowfields across the widest practical range of turbin...
Athair, A. et al University of Washington (NNMREC)
Mar 25, 2025
7 Resources
0 Stars
Publicly accessible

UNH TDP Concurrent Measurements of Inflow, Power Performance, and Loads for a Grid-Synchronized Vertical Axis Cross-Flow Turbine Operating in a Tidal Estuary

This data was collected between October 12 and December 15 of 2021 at the University of New Hampshire (UNH) and Atlantic Marine Energy Center (AMEC) turbine deployment platform (TDP). This data set includes over 29 days of grid connected turbine operation during this 65 day time f...
Wosnik, M. et al National Renewable Energy Laboratory
Dec 21, 2021
30 Resources
0 Stars
Publicly accessible
<< Previous12