Search OEDI Data
Showing results 26 - 50 of 1528.
Show
results per page.
Order by:
Available Now:
Research Areas
Accessibility
Data Type
Organization
Source
Brady Geothermal Field Borehole Pressure Data
This submission supersedes pressure data from March 2017 which can be found as a link in the submission resources. This submission contains 3 .csv files with time series pressure data in 3 observation wells at Brady Geothermal Field as part of the PoroTomo project. These pressure ...
Cardiff, M. and Lim, D. University of Wisconsin
Apr 01, 2016
4 Resources
0 Stars
Publicly accessible
4 Resources
0 Stars
Publicly accessible
Energy Return On Investment of Engineered Geothermal Systems Data
The project provides an updated Energy Return on Investment (EROI) for Enhanced Geothermal Systems (EGS). Results incorporate Argonne National Laboratory's Life Cycle Assessment and base case assumptions consistent with other projects in the Analysis subprogram.
EROI is a ratio o...
Mansure, C. Arthur Mansure
Jan 01, 2012
7 Resources
0 Stars
Publicly accessible
7 Resources
0 Stars
Publicly accessible
Fort Bliss Geothermal Area Data: Temperature Profile, Logs, Schematic Model and Cross Section
This dataset contains a variety of data about the Fort Bliss geothermal area, part of the southern portion of the Tularosa Basin, New Mexico. The dataset contains schematic models for the McGregor Geothermal System, a shallow temperature survey of the Fort Bliss geothermal area. ...
Brandt, A. University of Utah
Nov 15, 2015
14 Resources
0 Stars
Publicly accessible
14 Resources
0 Stars
Publicly accessible
Utah FORGE: Updated Phase 2C Well Location Coordinates
Utah FORGE has been established to develop, test, and improve the technologies and techniques required to develop EGS-type geothermal resources. Drilling of the first of two deep deviated wells, 16A(78)-32, will begin in the second half of 2020. This well will serve as the injecti...
Hardwick, C. Utah Geological Survey
Dec 07, 2020
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Reports on Northwestern Nevada Well Doublet Drilling and Testing by Fervo Energy
These reports review Fervo Energy's construction of a commercial enhanced geothermal system (EGS). Fervo has qualified full functionality of the system through production testing at commercially relevant operating conditions. The project site is located in a nearfield setting ad...
Dadi, S. et al Fervo Energy
Sep 05, 2023
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Utah FORGE: Well Acord 1-26 Logs and Data: Roosevelt Hot Spring Area
This is a compilation of logs and data from Well Acord 1-26 in the Roosevelt Hot Springs area in Utah. This well is also in the Utah FORGE study area.
Logs include: mud log (45'-12645'), compensated densilog (1102'-7923', 7900'-12644'), neutron log (1102'-7923'), dual induction ...
Moore, J. Energy and Geoscience Institute at the University of Utah
Mar 03, 2016
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Evaluation of Potential Geochemical Responses to Injection in the FORGE Geothermal Reservoir
Plugging of fracture porosity from mineral precipitation due to injecting cold water into a a geothermal reservoir can impact the overall permeability of the fracture network in the reservoir. This can have serious ramifications on the efficiency of the geothermal resource. Geoche...
Patil, V. and Simmons, S. Energy and Geoscience Institute at the University of Utah
Apr 03, 2019
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Sedimentary Geothermal Feasibility Colorado Well Database
Well data were mined from Geothermal Prospector (GTP), Southern Methodist University (SMU), the Colorado Oil and Gas Conservation Commission (COGCC), and the Colorado Geological Survey (CGS). The well data gathered was then used to assess sedimentary geothermal feasibility in the ...
Taverna, N. National Renewable Energy Laboratory
Oct 31, 2019
4 Resources
0 Stars
Publicly accessible
4 Resources
0 Stars
Publicly accessible
Utah FORGE: Well 78-32 Capacity Test
This dataset includes an Excel spreadsheet with Utah FORGE Phase 2c Well 78-32 capacity data. It also includes a readme file discussing the data which also includes the well coordinates.
Kirby, S. and Gall, R. Energy and Geoscience Institute at the University of Utah
Jun 20, 2019
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Lancaster County Adult Detention Facility Geothermal Well Field Configuration
Drawing showing the configuration of 667 bore holes drilled to depth of 300 ft. for the Lancaster County Adult Detention Facility geothermal heat pump system.
Davlin, T. District Energy Corporation
Feb 24, 2009
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Well 16A(78)-32 Simplified Discrete Fracture Network Data
The FORGE team is making these fracture models available to researchers wanting a set of natural fractures in the FORGE reservoir for use in their own modeling work. They have been used to predict stimulation distances during hydraulic stimulation at the open toe section of well 1...
Finnila, A. Golder Associates Inc.
Jun 01, 2021
3 Resources
0 Stars
Publicly accessible
3 Resources
0 Stars
Publicly accessible
Utah FORGE: Well 16A(78)-32: Summary of Drilling Activities
This is a 74 page detailed summary of the drilling activities of Utah FORGE 16A(78)-32, a highly deviated well completed on February 2nd, 2021, as part of the Utah FORGE project. This well was deviated at 65 degrees from vertical after reaching 6000 feet in depth had a total measu...
Winkler, D. et al Energy and Geoscience Institute at the University of Utah
Mar 20, 2021
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Temperature and Pressure Data Brady Monitoring Well SP-2
Static Pressure and Temperature Log for Brady monitor well SP-2. This data was taken from Well SP-2 which is part of the Brady Hot Springs Geothermal Site. The data contains pressure and temperature vs depth data for RIH (run in hole) Static conditions and POOH (pull out of hole) ...
Akerley, J. University of Wisconsin
Jan 01, 2015
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Utah FORGE: Regional Well Locations
This archive contains a GIS point feature shapefile that shows the locations of wells in the general region of the Utah FORGE project, near Roosevelt Hot Springs. This includes Utah FORGE deep well 58-32 and wells for which data has been uploaded to the Geothermal Data Repository....
Nash, G. Energy and Geoscience Institute at the University of Utah
Feb 22, 2018
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
The Value of Spatial Information for Determining Well Placement
The article and accompanying spreadsheet represent the information posteriors derived from synthetic data of magnetotellurics (MT). These were used to calculate value of information of MT for geothermal exploration. Information posteriors describe how well MT was able to locate t...
Trainor-Guitton, W. et al Lawrence Livermore National Laboratory
May 12, 2014
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Preliminary Analysis of Stress in the Newberry EGS Well NWG 55-29
As part of the planning for stimulation of the Newberry Volcano Enhanced Geothermal Systems (EGS) Demonstration project in Oregon, a high-resolution borehole televiewer (BHTV) log was acquired using the ALT ABI85 BHTV tool in the slightly deviated
NWG 55-29 well. The image log rev...
Davatzes, N. and Hickman, S. National Energy Technology Laboratory
Jan 01, 2011
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
West Flank Coso FORGE: 52B-7 Image and Mud Log
FMI image log and mud log of well 52B-7
Blankenship, D. Sandia National Laboratories
Apr 01, 1992
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Stability of Elastomers Subjected to Geothermal Well-Like Conditions
The aim of this study is to understand how commercially available elastomers perform under geothermal well-like conditions and make recommendations to the community based on these results. This poster highlights the mechanical performance of several elastomers (including EPDM, Vit...
Redline, E. et al Sandia National Laboratories
Aug 10, 2014
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
West Flank Coso FORGE: 33A-7 Image and Mud Log Data
Circumferential Borehole Imaging Log (CBIL) image log as DLIS file, and PDF mud log of well 33A-7 as part of the West Flank Coso, CA FORGE site.
Blankenship, D. Sandia National Laboratories
Apr 08, 2010
2 Resources
0 Stars
Publicly accessible
2 Resources
0 Stars
Publicly accessible
Geologic Map and Cross Sections of the McGinness Hills Geothermal Area GIS Data
Geologic map data in shapefile format that includes faults, unit contacts, unit polygons, attitudes of strata and faults, and surficial geothermal features.
5 cross-sections in Adobe Illustrator format.
Comprehensive catalogue of drill-hole data in spreadsheet, shapefile, and Ge...
E., J. University of Nevada
Dec 31, 2013
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Well 58-32 (MU-ESW1) FMI Log Fracture Results
A Schlumberger Fullbore Formation Micro-Imager (FMI) log was run from 7390 feet to 7527 feet depth in well 58-32, originally known as well MU-ESW1. Well 58-32 was completed in 2017 as part of Utah FORGE Phase 2. It reached a depth of 7536 feet and recorded a bottom hole temperatur...
BLOCHOWICZ, A. Energy and Geoscience Institute at the University of Utah
Mar 06, 2021
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Well Data for Student Competition
Well 58-32 (previously labeled MU-ESW1) was drilled near Milford Utah during Phase 2B of the FORGE Project to confirm geothermal reservoir characteristics met requirements for the final FORGE site.
Well Accord-1 was drilled decades ago for geothermal exploration purposes. While ...
Podgorney, R. et al Idaho National Laboratory
Dec 07, 2018
12 Resources
0 Stars
Publicly accessible
12 Resources
0 Stars
Publicly accessible
University of Illinois Campus Deep Direct-Use Feasibility Study Design of Injection Well #1 (CCS1)
Includes specification sheet, wellbore geometry, and drilling fluids at section target depth associated with the design of Injection Well #1 (CCS1) for the Illinois Basin Decatur Project (IBDP).
Greenberg, S. University of Illinois
Mar 30, 2018
1 Resources
0 Stars
Publicly accessible
1 Resources
0 Stars
Publicly accessible
Utah FORGE: Optimization of a Plug-and-Perf Stimulation (Fervo Energy)
Information around the plug-and-perf treatment design at Utah FORGE by Fervo Energy.
Objective and Purpose:
Develop a multistage hydraulic stimulation approach designed specifically to target the top three factors that control the technical and commercial viability of an EGS sys...
Norbeck, J. et al Fervo Energy
Feb 08, 2023
3 Resources
0 Stars
Publicly accessible
3 Resources
0 Stars
Publicly accessible
Brady Geothermal Field Well Pumping Data During Deployment
Contains pumping data associated with the wells used in the 2016 Spring Campaign led partially by UW Madison, LBNL, and LLNL scientists. The well coordinates and the depths to the pressure sensors used in the pumping wells can be found at the link "Coordinates and Sensor Depths" b...
Feigl, K. University of Wisconsin
Mar 30, 2016
3 Resources
0 Stars
Publicly accessible
3 Resources
0 Stars
Publicly accessible