Search OEDI Data

USDA Census of Irrigation

The 2018 Irrigation and Water Management Survey (formerly called the Farm and Ranch Irrigation Survey) is a follow-on to the 2017 Census of Agriculture by the U.S. Department of Agriculture (USDA). This survey provides the only comprehensive information on irrigation activities an...

Census of Irrigation, U. U.S. Department of Agriculture

Oct 19, 2020
5 Resources
0 Stars
Publicly accessible

StingRAY Updated WEC Risk Registers

Updated Risk Registers for major subsystems of the StingRAY WEC completed according to the methodology described in compliance with the DOE Risk Management Framework developed by NREL.

Rhinefrank, K. and Ondusko, M. Columbia Power Technologies, Inc.

Jun 27, 2018
17 Resources
0 Stars
Publicly accessible

StingRAY Failure Mode, Effects and Criticality Analysis: WEC Risk Registers

Analysis method to systematically identify all potential failure modes and their effects on the Stingray WEC system. This analysis is incorporated early in the development cycle such that the mitigation of the identified failure modes can be achieved cost effectively and efficient...

Rhinefrank, K. Columbia Power Technologies, Inc.

Jul 25, 2016
18 Resources
0 Stars
Publicly accessible

Utah FORGE: Phase 1a Tensor Strainmeter Data for the April, 2022 Stimulation of Well 16A(78)-32

Data from two Tensor Optical Fiber Strainmeters that were operational during Stages 1, 2, and 3 of the April, 2022 stimulation of well 16A(78)-32. Each csv file contains data from each stimulation stage (stage1, stage2, stage3) for both Phase 1a strainmeter installations (FS01, f...

DeWolf, S. and Murdoch, L. Clemson University

Sep 15, 2022
8 Resources
0 Stars
Publicly accessible

Advanced TidGen Power System Material Characterization Program

The TidGen Power System generates emission-free electricity from tidal currents and connects directly into existing grids using smart grid technology. The power system consists of three major subsystems: shore-side power electronics, mooring system, and turbine generator unit (TGU...

Marnagh, C. and McEntee, J. Ocean Renewable Power Company

Jun 14, 2018
2 Resources
0 Stars
Publicly accessible

Utah FORGE Project 3-2535: Building a 3D Resistivity Model for Simulation and Survey Design of EM Measurements

The included report outlines the creation of three 3D resistivity models that will be used to determine the sensitivity of EM measurements for the hypothetical stimulated reservoir at FORGE as well as for EM survey design. FORGE project 3-2535 is planning on using a casing source ...

Alumbaugh, D. et al Lawrence Berkeley National Laboratory

Dec 01, 2022
5 Resources
0 Stars
Publicly accessible

Utah FORGE Project 3-2535: Compilation of Geodetic Data and Estimation of Associated Deformation

Report on possible geodetic signature of the 3 stimulations in April 2022 as well as a comparison with existing InSAR data gathered over the site before, during, and after the stimulation. In geothermal production it is important to understand the existing stress field and the cha...

Vasco, D. et al Lawrence Berkeley National Laboratory

Apr 29, 2022
4 Resources
0 Stars
Publicly accessible

Geothermal Electricity Technology Evaluation Model (GETEM) Individual Case Files and Summary Spreadsheet (GETEM version Spring 2013)

This group of files includes 10 GETEM individual scenario files and 1 summary spreadsheet. Each spreadsheet contains final data (following the revisions made between summer of 2011 and spring of 2013).

Entingh, D. et al Idaho National Laboratory

Mar 07, 2013
11 Resources
0 Stars
Publicly accessible

InSAR Maps of Deformation Covering Raft River, Idaho from 2007 to 2010

This dataset contains maps of deformation covering Raft River, Idaho from 2007 to 2010 calculated from interferometric synthetic aperture radar data. This dataset is used in the study entitled "Inferring geothermal reservoir processes at the Raft River Geothermal Field, Idaho, US...

Reinisch, E. University of Wisconsin

Mar 11, 2007
8 Resources
0 Stars
Publicly accessible

National Brackish Groundwater Assessment 2017

Brackish groundwater (BGW), defined for this assessment as having a dissolved-solids concentration between 1,000 and 10,000 milligrams per liter, is an unconventional source of water that may offer a partial solution to current (2016) and future water challenges. In support of the...

Qi, S. and Harris, A. United States Geological Survey

Apr 05, 2017
3 Resources
0 Stars
Publicly accessible

Mechanical Ventilation and Indoor Air Quality in Recently Constructed U.S. Homes in Marine and Cold-Dry Climates Data from Building America Project

Data were collected to characterize whole-house mechanical ventilation (WHMV) and indoor air quality (IAQ) in 55 homes in the Marine climate of Oregon and Cold-Dry climate of Colorado in the U.S. Sixteen homes were monitored for two weeks, with and without WHMV operating. Ventilat...

Zhao, H. et al Lawrence Berkeley National Laboratory

Mar 22, 2023
2 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 2: Distributed Fiber Optic Temperature Data (DTS)

Distributed fiber optic sensing was an important part of the monitoring system for EGS Collab Experiment #2. A single loop of custom fiber package was grouted into the four monitoring boreholes that bracketed the experiment volume. This fiber package contained two multi-mode fiber...

Rodriguez Tribaldos, V. et al Lawrence Berkeley National Laboratory

Nov 08, 2022
10 Resources
0 Stars
Publicly accessible

The measurement of depth of water in oceans, seas, or lakes GEBCO bathymetry gridded data for North Sea / Baltic Sea Derived Data

**Overview** This dataset contains global bathymetry, or water depth, measurements from the General Bathymetric Chart of the Oceans (GEBCO), converted into the format needed for WRF's Pre-processing System (WPS). The data are read in for the use of a depth-dependent water surface...

Hawbecker, P. Wind Energy Technologies Office (WETO)

Dec 31, 2019
1 Resources
0 Stars
Publicly accessible

Simulations of Brady's-Type Fault Undergoing CO2 Push-Pull: Pressure-Transient and Sensitivity Analysis

Input and output files used for fault characterization through numerical simulation using iTOUGH2. The synthetic data for the push period are generated by running a forward simulation (input parameters are provided in iTOUGH2 Brady GF6 Input Parameters.txt [InvExt6i.txt]). In gene...

Jung, Y. and Doughty, C. Lawrence Berkeley National Laboratory

Mar 09, 2018
11 Resources
0 Stars
Publicly accessible

University of Illinois Campus Deep Direct-Use Feasibility Study Thermal Properties of Geologic Formations in Illinois Basin

Thermal property data for rocks and and minerals and unconsolidated (glacial) sediments units from within and outside the Illinois Basin were compiled for modeling heat transport in the subsurface.

Lin, Y. et al University of Illinois

Mar 30, 2018
6 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: Second Set Tracer Test Results

The EGS Collab project is developing ~10-20 m-scale field sites where fracture stimulation and flow models can be validated against controlled, small-scale, in-situ experiments. The first multi-well experimental site was established at the 4850 level in the Homestake Mine in Lead,...

Neupane, G. et al Idaho National Laboratory

Dec 19, 2019
4 Resources
0 Stars
Publicly accessible

EGS Collab Experiment 1: Earth Model Input Files

The EGS Collab is conducting experiments in hydraulic fracturing at a depth of 1.5 km in the Sanford Underground Research Facility (SURF) on the 4850 Level. A total of eight ~60m-long subhorizontal boreholes were drilled at that depth on the western rib of the West Access Drift. S...

Neupane, G. and Sigma-V, T. Idaho National Laboratory

Dec 19, 2019
6 Resources
0 Stars
Publicly accessible

Mass of Water Turbine Current Energy Converter CFD Results

The CFD (computational fluid dynamics) results for the Mass of Water Turbine (MOWT) current energy converter from MWNW Consulting (formerly Ecosse IP). Each case is self-contained in its own tar.gz archive file. The archive contains the scripts required to perform a full simulati...

Chartrand, C. and Moir, S. Sandia National Laboratories

May 27, 2022
75 Resources
0 Stars
Publicly accessible

Thermal-Hydrological-Mechanical Modelling of Stockton University Reservoir Cooling System, Fine Scale Stress Test Modelling

Mesh, properties, initial conditions, injection/withdrawal rates for modelling thermal, hydrological, and mechanical effects of fluid injection to and withdrawal from ground for Stockton University reservoir cooling system (aquifer storage cooling system), Galloway, New Jersey, fo...

Smith, J. et al Lawrence Berkeley National Laboratory

Feb 22, 2021
14 Resources
0 Stars
Publicly accessible

BOBr Processed Breaking Wave Data, Agate Beach, OR

This data was recorded by the BOBr (Buoy to Observe Breaking) off the coast of Newport, OR at Agate Beach in the surf zone. The data was recorded by a 9dof inertial measurement unit and consists of a timestamp, quaternion orientation, acceleration vector, rotation vector, and mag...

C, A. Oregon State University

Oct 31, 2013
17 Resources
0 Stars
Publicly accessible

INGENIOUS Thermal Conductivity Measurement Source Categorization

Thermal conductivity (TC) data taken for different wells at a specified drill depth. This is an abridged version of the complete SMU heat flow database, downloaded from the SMU node of the NGDS at the beginning of INGENIOUS (approximately April 2021), and filtered to the INGENIOUS...

Batir, J. and Gentry, E. University of Nevada, Reno

Jun 01, 2021
1 Resources
0 Stars
Publicly accessible

Imperial Valley Dark Fiber Project Continuous DAS Data

The Imperial Valley Dark Fiber Project acquired Distributed Acoustic Sensing (DAS) seismic data on a ~28 km segment of dark fiber between the cities of Calipatria and Imperial in the Imperial Valley, Southern California. Dark fiber refers to unused optical fiber cables in telecomm...

Ajo-Franklin, J. et al Lawrence Berkeley National Laboratory

Nov 10, 2020
4 Resources
0 Stars
Publicly accessible

Active Management of Integrated Geothermal-CO2 Storage Reservoirs in Sedimentary Formations

The purpose of phase 1 is to determine the feasibility of integrating geologic CO2 storage (GCS) with geothermal energy production. Phase 1 includes reservoir analyses to determine injector/producer well schemes that balance the generation of economically useful flow rates at the ...

A., T. Lawrence Livermore National Laboratory

Jan 01, 2012
9 Resources
0 Stars
Publicly accessible

Geothermal Mineral Alterations in Brady and Desert Peak

Results of the analysis of HyMap's spectra against know hydrothermally altered minerals in the Brady-Desert Peak Geothermal Areas. This is the post-processing results and final analysis results of applying target detection algorithms and then fusing the results.

Moraga, J. Colorado School of Mines

May 15, 2021
22 Resources
0 Stars
Publicly accessible

Fallon FORGE: Geophysics and Geochemistry

The data is associated to the Fallon FORGE project and includes mudlogs for all wells used to characterize the subsurface, as wells as gravity, magnetotelluric, earthquake seismicity, and temperature data from the Navy GPO and Ormat. Also included are geologic maps from the USGS a...

Blankenship, D. Sandia National Laboratories

May 23, 2016
5 Resources
0 Stars
Publicly accessible

<< Previous 78 79 80 81 82 83 84 85 86 Next >>